Hopp til innhold

Tamiya 85008 Spray Lacquer TS-8 Italian Red 3 oz

Art.nr: 85008

109,-

Tamiya

Tamiya

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

   This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya.

FEATURES: Cures in a short period of time.
          Extremely useful for painting large surfaces.
          100ml is enough to fully cover two or three 1/24 scale sized car
            bodies.
          Tamiya spray paints are not affected by acrylic or enamel paints.
            Therefore, following the painting of the entire assembly, details
            can be added or picked out using enamel and/or acrylic paints.  By
            combining three different paints, the decoration of plastic
            models will become simpler and more effective.
          Available in 52 colors.

INCLUDES: One 100ml Spray Can of Synthetic Lacquer Italian Red Paint.

REQUIRES: Eye, Lung and Skin Protection.

COMMENTS: Highly Flammable, Pressurized Container.
          Keep out of the reach of children.

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Kunder kjøpte også

KJØP
Gjenskap en ekte legende innen langdistanseløp med Tamiya 14014 Honda RS1000 Endurance Racer i skala 1:12! Dette ikoniske byggesettet fanger de rå musklene og de elegante linjene til maskinen som dominerte på tidlig 1080-tall. Modellen leveres med detaljer som lar deg bygge enten den halvkåpede vinneren fra Suzuka 8-timersløpet i 1981, eller den aerodynamiske helkåpe-versjonen. Settet byr på en høydetaljert, luftkjølt 4-sylindret DOHC-motor, realistiske gummidekk og spesialdesignede dekaler for det klassiske røde, hvite og blå fabrikkdesignet til Honda. Anbefalte Tamiya malingsfarger For å oppnå det mest autentiske resultatet, anbefaler Tamiya følgende fargekoder (TS-sprayserie og X/XF-akrylfarger): TS-8 Italian Red: Hovedfarge for kåpe og tank. TS-26 Pure White: Kontrastfarge på kåpe og design. X-1 Black: Detaljer, ramme og motorkomponenter. X-2 White: Smådetaljer. X-4 Blue: Det ikoniske blå feltet i fabrikkdesignet. X-10 Gun Metal: Eksosrør, motordeler og mekaniske komponenter. X-11 Chrome Silver: Forgassere, dempere og speilflater. XF-1 Flat Black: Dekk, seter og matte overflater. XF-16 Flat Aluminum: Sylinderblokk og motordetaljer. XF-56 Metallic Grey: Kjede og andre slitedeler i metall. Nødvendig lim og verktøy Plastbyggesett krever presisjonsverktøy og riktig kjemi for at monteringen skal bli perfekt. Vi anbefaler følgende tilbehør: Tamiya Extra Thin Cement (Lim): Det absolutt beste limet for plastmodeller. Det flyter inn i skjøtene av seg selv ved hjelp av kapillærkraft og etterlater minimale limrester. Tamiya Side Cutter (Plastavbiter): For å klippe delene rent og pent ut av støperammene uten å skade plasten. Modellkniv / Skalpell: Uunnværlig for å fjerne små støpekanter og preppe delene før liming. Pussestikker / Fint sandpapir (Korningsgrad 400–1000): For å pusse ned limskjøter slik at overflaten blir helt glatt før lakkering. Pinsett: Et must for å håndtere de minste motordelene og plassere dekalene nøyaktig. Spesifikasjoner: Produsent: Tamiya Modellnummer: 14014 Skala: 1:12 Type: Plastbyggesett (montering og lakkering kreves)

449,-

479,-

KJØP
-6%
    This is a 40ml Bottle of Tamiya's Extra Thin Cement. FEATURES: This cement is extremely useful when gluing plastic parts to a             desired position while holding them in place together.           The thin cement flows smoothly between the gaps of the fitted parts             by capillary action.           The plastic screw-on lid has an applicator brush attached.           The pointed applicator tip makes it easy to put the cement where             desired.           Clear liquid.           Glass bottle. INCLUDES: One Bottle of Extra Thin Cement SPECS:    Volume:  40ml

75,-

KJØP
 This is Tamiya Color Spray Paint for Plastics (TS-60 Pearl Green).                          For Adult Modelers Only. FEATURES: Extremely useful for painting large surfaces.           The paint is a synthetic lacquer that cures in a short period of time           Not affected by acrylic or enamel paints; therefore, details can be             added after painting.           Enough paint to fully cover 2 or 3, 1:24 scale sized car bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Paint (TS-60 Pearl Green) SPECS:    Net Volume: 3.38oz (100ml) COMMENTS: Highly flammable.

109,-

KJØP
Fuse Overgang - Male Deans til Female Tamiya

49,-

KJØP
OBS: Dette er G2-utgaven. Sjekk at denne passer mot din ESC. Overview This LED program box is for programming HobbyWing brushless ESCs. Its friendly interface makes ESC programming easy and quick. It’s compact, portable and very applicable for field use.  It works with the following HobbyWing products: 1. Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs.  2. XeRun series (not all), EzRun series & QuicRun series of brushless car ESCs.  3. SeaKing series of brushless boat ESCs.   Specifications Size:88x58x14mm(LxWxH) Weight:40g Input Voltage: 4.8V—8.4V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)

175,-

KJØP
Tamiya metal primer, til bruk på metal. Den er "KLAR" av farge, og det indikeres av lokket på boksen. 100ml per boks

109,-

KJØP
This is a Jar of Tamiya Color Acrylic Paint Mini (XF-73 Dark Green JGSDF).                       For Adult Modelers Age 14 & Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and is completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number XF-73 on the Tamiya Color Chart. INCLUDES: (1) Jar of Acrylic Paint "Mini" REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

30,-

KJØP
    This is a 10ml Jar of Tamiya color Acrylic Paint "Mini" (Nato Green).                      For Adult Modelers Age 14 and Older. FEATURES: Handy paint for hobby use.           Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin and             styrofoam.           It can be washed away with plain water if done prior to curing.           Glass jar with a plastic, color coded, screw-on lid.           Paint number XF-67 on the Tamiya Color Chart. INCLUDES: One Jar of Acrylic Paint "Mini" (Nato Green) REQUIRES: Stir Stick SPECS:    Volume:  10ml  (1/3 fl oz)

30,-

KJØP
 This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Khaki paint (yellow/green) REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
  7,2V 5000mAh - Bronto SP - Ni-Mh Stick Pack - Drivbatteri for bil, båt m.m. Leveres med standard Tamiyaplugger. Maks anbefalt ladestyrke 3.5A   Vekt    434gram Lengde   135mm Bredde   47mm Høyde   24mm

419,-

KJØP
Genial til Tamiyabiler! Radio og mottaker. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker og 6kg analog servo. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr.   R/C Set - Radioset with Servo.   The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast.   What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements.   Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle!     Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required)     Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input       S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

679,-

719,-

KJØP
-6%
Thickest ZAP of all - great for filling gaps. The tube comes with a long tapered tip allowing precise application. The role playing gaming industry uses it for gluing pewter and plastic figures. Fly tiers and custom lure manufactures like it because it stays where they want it. Jewelry makers like the high strength and the ability to apply just the right amount. Model builders also like the high strength features and use it for servo mounts, laminating, gluing plywood, anywhere a fast curing high strength joint is needed.   Super thick formula Jelly like concentrated CA glue Will not run or flow Can be applied to Vertical or overhead surfaces Use CA kicker to accelerate cure time Works best on: Aluminum Ceramic China Metal Most Plastics Pewter Rubber Wood   Tube size: 0.1 oz / 3 g

29,-

KJØP
Tamiya 70176 70176 Pla-Plate 2.0mm B4 Size 1pcs   Tamiya offers Clear Pla-Plate in .3mm as part of the Construction Material Series. Clear Pla-Plate also is available in .2mm (Item 70126) and .4mm (Item 70127). This item can be used for design work and various model constructions. 364MM x 257MM B4 size 2MM thickness.

149,-

KJØP
Tires, Anaconda 2.2" (rear) (2)/ foam inserts (Bandit) (soft compound) Anaconda 2.2" performance street tires provide exceptional wear and sticky traction for high-speed asphalt action. Fits Traxxas and other standard 2.2" buggy wheels.

199,-

219,-

KJØP
-9%
Fuse Overgang - Female Traxxas til Male Deans

59,-

KJØP
Pluggadapter for tilkobling av Tamiya plugg (han) til Traxxas (hun) Bruksområde f.eks. med børsteløse hastighetsregulatorer eller ladekabler

69,-

79,-

KJØP
-13%
Tamiya 87207 masking tape 2mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 2 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 2 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 2mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 2mm   Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

KJØP
   This is a 100ml Spray Can of Tamiya Color Paint for                       Plastics (TS-51 Telefonica Blue). FEATURES: These cans of spray paint are extremely useful for painting large             surfaces.           Synthetic lacquer that cures in a short period of time.           Enough paint to cover 2 or 3 1/24 scale car bodies.           Not effected by acrylic or enamel paints, so detailing can be added. INCLUDES: One 100ml Spray Can of Tamiya Color Paint for Plastics (TS-51             Telefonica Blue). SPECS:    Volume: 100ml

109,-

KJØP
Bronto Ladekabel - 4mm til T-Plug (Deans)   Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling.   Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2    T-plug (Deans) male

75,-

KJØP
This is an Angled Tweezers from Tamiya.     FEATURES Handy when handling small parts and adding decals to your models.  The edges of the tweezers are rounded to prevent scratching.  Stainless steel with a Black cationic finish for long life.  Carded packaging.   INCLUDES One Angled Tweezers.   SPECIFICATIONS  Length: 6" (15.2cm)  sdw 10/31/01

129,-

KJØP
2 Celler lipo – 3300mAh – 30C Ett meget bra lipo batteri i hardcase – rund type. Denne leveres med deans kontakt og XH ballansekontakt Lengde: 133mm Bredde: 44mm Høyde 22.5mm 250gr

399,-

429,-

KJØP
-7%
The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. Compatible with drill bits of sizes from 0.1-3.2mm. Rotating grip end features built-in ball bearings for smooth movement. Made from nickel-plated brass, with elastomer grip. Features metallic sticker with the Tamiya twin star logo and wording «PIN VISE». The rubber grip is engraved with the wording «TAMIYA».

279,-

299,-

KJØP
-7%
  This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Bright Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Metallic Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png