Hopp til innhold
-7%

Tamiya 47482 1/10 RC Astute 2022 Painted body (TD2 chassis)

Art.nr: 47482

3.995,-

4.295,-

- 7%
Tamiya

Tamiya

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tamiya 1/10 RC Astute 2022 Painted body (TD2 chassis)

This limited-edition version of the Astute 2022 (Item 58697) comes with a pre-painted, and pre-cut body. It’s ideal for new and veteran hobbyists who want to get to the build process of the chassis while not having to worry about painting the body!

TD2 chassis at a glance:
The new TD2 chassis is based around the TD4 chassis. Just like the TD4 machine, it employs a front inboard suspension layout which offers exceptionally slim, low-profile form. Its front suspension arms have a skid angle of 25 degrees, for amazing ground-hugging and stable performance, plus CVA oil dampers to allow smooth suspension movement. Furthermore, the chassis is based on a one-piece monocoque frame, uses the same ball differential as the ones used on the TD4 chassis, plus full ball bearings are used throughout the driveline. The battery pack is positioned transversely and positioned to the rear. Finally, a midship transverse motor layout with 3 gears connecting it to the drivetrain provide optimum balance and improved performance.

• 1/10 R/C assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm.
• Polycarbonate body comes pre-painted in RED and is pre-cut.
• Ribbed front and rear square spike tires facilitate stability and great grip. Newly designed star dish design front wheels are attached by hex hubs.
• 4-wheel double wishbone suspension system uses CVA oil dampers for supple performance.
• Choose between high and low type wing stays to adjust the downforce set up of the buggy.
• Driver figure included for extra realism.

Requires:

  • 2-channel radio
  • steering servo
  • ESC
  • 540-size motor
  • 7.2-7.4volt battery
  • compatible charger.

Specs:

  • Adjustable Gear Ratio Yes
  • Bearings Includes full ball bearings
  • Body Material Polycarbonate pre-painted body
  • Body Stickers Included
  • Chassis Material FRP Fiberglass Reinforced Plastic
  • Chassis Type TD-2
  • Construction Type Assembly Kit
  • Differential Type Ball Pressure Plate
  • Drive Type 2WD
  • Electronic Speed Control (esc) Not Included
  • Required To Complete 2-channel radio, Low-profile steering servo, ESC, motor, 7.2-7.4volt battery & battery charger
  • Scale 1/10
  • Shock Damper CVA Oil Filled
  • Suspension Fully Independent Double Wishbone
  • Terrain Use Off-Road

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Relaterte produkter

 

Art.nr: E-60WP
Copied
Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC) Item no. 542408 The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.   Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 60A Forward Burst Current: 360A Reverse Continuous Current: 230A Reverse Burst Current: 180A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36.5x32x18mm Weight: 39g

399,-

449,-

KJØP
-11%
Art.nr: 100149-01
Copied
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Art.nr: VP3000 Tamiya
Copied
7.2V 3000 mAh NiMH Stick-Pack Battery with Tamiya Connector Battery: 6-cell 7.2V 3000 mAh NiMH Charge: recomended 2-2.5A Max 3.5A Connector: Tamiya Male Wires: 14AWG Length: 138 mm Width: 48 mm Height: 25 mm Weight: 321 g Type of Battery: NiMH Capacity: 3000 mAh Number of cells: 6 Voltage: 7,2 V Power connector: Tamiya      

279,-

299,-

KJØP
-7%
Art.nr: VP4000SCH6D2
Copied
7.2V 4000 mAh NiMH Stick-Pack Battery with Deans/T-plug Connector Specs: Battery: 6-cell 7.2V NiMH Stick Pack Capacity: 4000 mAh Connector: Tamiya Wires: 14AWG Fast Charge: 4A Peak Slow Charge: 400mAh 12-16 hours Size: L135 x W46.5 x H24 mm Weight: 379 g

349,-

KJØP
Art.nr: VP4000SCH6T1
Copied
7.2V 4000 mAh NiMH Stick-Pack Battery with Tamiya Connector Specs: Battery: 6-cell 7.2V NiMH Stick Pack Capacity: 4000 mAh Connector: Tamiya Wires: 14AWG Fast Charge: 4A Peak Slow Charge: 400mAh 12-16 hours Size: L135 x W46.5 x H24 mm Weight: 379 g

369,-

KJØP
Art.nr: 58697
Copied
Tamiya 58697 Astute 2022 (TD2) 2WD Kit 1:10   Tamiya brings yet another off-road buggy to its vast library of high-performance and fun to build R/C kits. This is the Astute 2022, which is based on the new TD2 chassis. TD2 chassis at a glance: The new TD2 chassis is based around the TD4 chassis. Just like the TD4 machine, it employs a front inboard suspension layout which offers exceptionally slim, low-profile form. Its front suspension arms have a skid angle of 25 degrees, for amazing ground-hugging and stable performance, plus CVA oil dampers to allow smooth suspension movement. Furthermore, the chassis is based on a one-piece monocoque frame, uses the same ball differential as the ones used on the TD4 chassis, plus full ball bearings are used throughout the driveline. The battery pack is positioned transversely and positioned to the rear. Finally, a midship transverse motor layout with 3 gears connecting it to the drivetrain provide optimum balance and improved performance. FEATURES: 1/10 R/C assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm. Polycarbonate body. Ribbed front and rear square spike tires facilitate stability and great grip. Newly designed star dish design front wheels are attached by hex hubs. 4-wheel double wishbone suspension system uses CVA oil dampers for supple performance. Choose between high and low type wing stays to adjust the downforce set up of the buggy. Driver figure included for extra realism. REQUIRES: 2-channel radio steering servo ESC 540-size motor 7.2-7.4volt battery with compatible charger Tamiya PS paint to complete Morsom byggevideo:      

3.195,-

3.995,-

KJØP
-20%

Kunder kjøpte også

This is the Tamiya 25 Turn RS-540 Torque Tuned Brushed Motor. FEATURES: Ideal upgrade for 1/10 scale RTR Tamiya electric vehicles           May be used in official Tamiya races INCLUDES: Tamiya 25 Turn RS-540 Torque Tuned Motor with presoldered Leads and            3.5mm Male Bullet Connectors SPECS:    Can Diameter: 1.4" (35.8mm)           Length: 2" (51mm)           Shaft Diameter: 0.12" (3mm)

199,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gloss Clear. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Silver Leaf Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gun Metal Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
FlySky FS-GR3E receiver The FS-GR3E 3-channel receiver operates in the AFHDS system at 2.4 GHz. The receiver is compatible with FlySky GT2, GT2B, GT3, GT3B, GT3C, T6, CT6B, GR3E and TH9X transmitters. The receiver is designed for RC trucks, buggies, and boats.

219,-

249,-

KJØP
-12%
Tamiya 58697 Astute 2022 (TD2) 2WD Kit 1:10   Tamiya brings yet another off-road buggy to its vast library of high-performance and fun to build R/C kits. This is the Astute 2022, which is based on the new TD2 chassis. TD2 chassis at a glance: The new TD2 chassis is based around the TD4 chassis. Just like the TD4 machine, it employs a front inboard suspension layout which offers exceptionally slim, low-profile form. Its front suspension arms have a skid angle of 25 degrees, for amazing ground-hugging and stable performance, plus CVA oil dampers to allow smooth suspension movement. Furthermore, the chassis is based on a one-piece monocoque frame, uses the same ball differential as the ones used on the TD4 chassis, plus full ball bearings are used throughout the driveline. The battery pack is positioned transversely and positioned to the rear. Finally, a midship transverse motor layout with 3 gears connecting it to the drivetrain provide optimum balance and improved performance. FEATURES: 1/10 R/C assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm. Polycarbonate body. Ribbed front and rear square spike tires facilitate stability and great grip. Newly designed star dish design front wheels are attached by hex hubs. 4-wheel double wishbone suspension system uses CVA oil dampers for supple performance. Choose between high and low type wing stays to adjust the downforce set up of the buggy. Driver figure included for extra realism. REQUIRES: 2-channel radio steering servo ESC 540-size motor 7.2-7.4volt battery with compatible charger Tamiya PS paint to complete Morsom byggevideo:      

3.195,-

3.995,-

KJØP
-20%
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Tamiya packaging *** Article number: 500906264 Product: Speed Controller Dragster Brushed 70A The sensitive speed controller for 1:10 RC models is waterproof and can therefore be installed in boats. Of course, it can also be used in 1:10 buggies, on-road, off-road vehicles and crawlers. The controller is designed for 2 to 3 LiPo cells. With a T-plug connector adapter, NiMH batteries can also be used. Included: Elektric speed controler Dragster Brushed 70 A,Tamiya/T-Plug adapter, manual.

399,-

439,-

Ikke på lager
-9%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png