Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Arrma optionparts / Arrma Big Rock / RPM 81502 Rear A-arms for the 4WD ARRMA Big Rock, Senton & Grani

RPM 81502 Rear A-arms for the 4WD ARRMA Big Rock, Senton & Grani

Art.nr: 81502

129,-

RPM

RPM
På lager: 7

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Rear A-arms for the ARRMA Big Rock 4×4, Senton 4×4 & Granite 4×4 replaces stock #AR330516  

Quick Notes:
– fits 3s BLX 4×4 versions of the Big Rock, Granite & Senton
– exclusive 2nd shock mount hole for added adjustability
– replaces stock #AR330516
– Big Rock owners, please see “Version Compatibility Notes” below

RPM A-arms for the 4×4 3S BLX versions of the Granite, Senton & Big Rock are the answer to the questions you didn’t know you had. Are you looking for more adjustability? Check! How about better durability? Got that covered too. How about lightweight? Yup, no problem!

Adjustability: We’ve added a second shock mount to both our front and rear A-arms to the outside of the stock shock mount, adding adjustability and improving trackability. Our outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds.

Durability: Molded from our trademark blend of indestructible, engineering grade nylons, you can’t get much tougher! We’ve also redesigned the shape of the A-arms while retaining stock suspension geometry to help improve survivability for those “oops” moments.

Lightweight: With our stronger materials and improved designs, we’re able to cut out unnecessary weight while still offering suspension components that are unparalleled in performance and durability.

Tech Notes: RPM A-arms fit the following ARRMA vehicles; Big Rock 4×4 (#AR102711), Senton 4×4 (#AR102668, #AR102667 & #AR102678) & Granite 4×4 (#AR102665, #AR102666 & #AR102676). RPM Rear A-arms replace ARRMA #AR330516.

Version Compatibility Notes: Big Rock owners, please use caution and double check the stock ARRMA part number of the a-arm you are replacing. Some Big Rock versions use the Granite 4×4 a-arms shown here while others use Typhon 3S a-arms.

Produsent

RPM

RPM

Relaterte produkter

 

Hovedbilde RPM 81492 Front A-arms for the ARRMA Big Rock 4×4, ...
RPM 81492 Front A-arms for the ARRMA Big Rock 4×4, ...
Art.nr: 81492
Copied
RPM Front A-arms for the ARRMA Big Rock 4×4, Senton 4×4 & Granite 4×4 replaces stock #AR330443 Quick Notes: – fits 3s BLX 4×4 versions of the Big Rock, Granite & Senton – exclusive 2nd shock mount hole for added adjustability – replaces stock #AR330443 – Big Rock owners, please see “Version Compatibility Notes” below RPM A-arms for the 4×4 3S BLX versions of the Granite, Senton & Big Rock are the answer to the questions you didn’t know you had. Are you looking for more adjustability? Check! How about better durability? Got that covered too. How about lightweight? Yup, no problem! Adjustability: We’ve added a second shock mount to both our front and rear A-arms to the outside of the stock shock mount, adding adjustability and improving trackability. Our outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds. Durability: Molded from our trademark blend of indestructible, engineering grade nylons, you can’t get much tougher! We’ve also redesigned the shape of the A-arms while retaining stock suspension geometry to help improve survivability for those “oops” moments. Lightweight: With our stronger materials and improved designs, we’re able to cut out unnecessary weight while still offering suspension components that are unparalleled in performance and durability. Tech Notes: RPM A-arms fit the following ARRMA vehicles; Big Rock 4×4 (#AR102711), Senton 4×4 (#AR102668, #AR102667 & #AR102678) & Granite 4×4 (#AR102665, #AR102666 & #AR102676). RPM Front A-arms replace ARRMA #AR330443. Version Compatibility Notes: Big Rock owners, please use caution and double check the stock ARRMA part number of the a-arm you are replacing. Some Big Rock versions use the Granite 4×4 a-arms shown here while others use Typhon 3S a-arms.

199,-

KJØP

Kunder kjøpte også

Hovedbilde RPM 80609 Rear Upper/Lower A-Arms Red 1/16 E-Revo ... Hovedbilde RPM 80609 Rear Upper/Lower A-Arms Red 1/16 E-Revo ...
RPM 80609 Rear Upper/Lower A-Arms Red 1/16 E-Revo ...
RPM Rear A-arms for 1/16 E-Revo - Red Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

199,-

Ikke på lager
Hovedbilde RPM 73169 Axle Carriers Red 1/16 Revo/Slash
RPM 73169 Axle Carriers Red 1/16 Revo/Slash
1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!    

169,-

KJØP
Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter
Flysky FS-GT3B 2.4GHZ Transmitter
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Hovedbilde Traxxas 6728 Body Skid Plate Roof Black Rustler 4x4
Traxxas 6728 Body Skid Plate Roof Black Rustler 4x4
Skid plate, roof (body)/ 3x12mm CS (4)

79,-

KJØP
Hovedbilde RPM 81492 Front A-arms for the ARRMA Big Rock 4×4, ...
RPM 81492 Front A-arms for the ARRMA Big Rock 4×4, ...
RPM Front A-arms for the ARRMA Big Rock 4×4, Senton 4×4 & Granite 4×4 replaces stock #AR330443 Quick Notes: – fits 3s BLX 4×4 versions of the Big Rock, Granite & Senton – exclusive 2nd shock mount hole for added adjustability – replaces stock #AR330443 – Big Rock owners, please see “Version Compatibility Notes” below RPM A-arms for the 4×4 3S BLX versions of the Granite, Senton & Big Rock are the answer to the questions you didn’t know you had. Are you looking for more adjustability? Check! How about better durability? Got that covered too. How about lightweight? Yup, no problem! Adjustability: We’ve added a second shock mount to both our front and rear A-arms to the outside of the stock shock mount, adding adjustability and improving trackability. Our outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds. Durability: Molded from our trademark blend of indestructible, engineering grade nylons, you can’t get much tougher! We’ve also redesigned the shape of the A-arms while retaining stock suspension geometry to help improve survivability for those “oops” moments. Lightweight: With our stronger materials and improved designs, we’re able to cut out unnecessary weight while still offering suspension components that are unparalleled in performance and durability. Tech Notes: RPM A-arms fit the following ARRMA vehicles; Big Rock 4×4 (#AR102711), Senton 4×4 (#AR102668, #AR102667 & #AR102678) & Granite 4×4 (#AR102665, #AR102666 & #AR102676). RPM Front A-arms replace ARRMA #AR330443. Version Compatibility Notes: Big Rock owners, please use caution and double check the stock ARRMA part number of the a-arm you are replacing. Some Big Rock versions use the Granite 4×4 a-arms shown here while others use Typhon 3S a-arms.

199,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png