Hopp til innhold

Maxam 450199 adapter T-plugg han - Traxxas hun

Art.nr: 450199

59,-

Maxam

Maxam

Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Adapter, T-plug han - Traxxas hun

Produsent

Kunder kjøpte også

These are the Body Clips for the Latrax Rally Car from Traxxas. FEATURES Steel construction Sized for the 1/18 scale body on the Latrax Rally Car INCLUDES Twelve Body Clips

29,-

KJØP
SKYRC eN20 NiMH/NiCd Charger is an economic, high quality 100-240V AC charger, designed for charging NiMH and NiCad batteries from 4-8 cells. The circuit power is 20W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity. There is one LED indicating the charger status (ready to charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working.   Explanation of LED Status: CHARGE LED STATUS CHARGE STATUS LED Flashes Green The Charger is Ready LED Glows Red Battery Charger in process LED Glows Green Battery charger is fully charged Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.4 x 110.7 x 40.5 mm Weight: 175 g Included: eN20 Charger 240VAC adapter with Euro connector Charging lead with Tamiya connector Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.5 x 110 x 40.4 mm Weight: 175 g

349,-

399,-

KJØP
-13%
This is the Traxxas 7-Cell 8.4V 3000mAh Power Cell NiMH Hump Pack  with iD Connector.     FEATURES New high current connector with gold-plated copper terminals  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings  MAXX cable high-efficiency 12 gauge silicone jacketed wire  Sub C size cells   INCLUDES 7-cell 8.4V 3000mAh Power Cell NiMH Stick Pack with iD Connector   REQUIREMENTS Peak-detection charger   SPECIFICATIONS  Length: 5.3" (134mm)  Width: 1.7" (44mm)  Height: 1.6" (42mm)

499,-

529,-

KJØP
-6%
These are the replacement Body Clip Retainers for the Traxxas Spartan. FEATURES Rubber construction INCLUDES Four Black Body Clip Retainers COMMENTS The body clips are attached to the Green strap. The strap mounts to the the body. This helps to prevent the loss of body clips.

39,-

KJØP
This is the Complete Differential Assembly for use on the                   Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel and nylon construction INCLUDES: One Complete Differential Assembly REQUIRES: Installation on the vehicle

289,-

KJØP
    Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 3s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 3s

169,-

KJØP
This is a 20 Gram Bottle of Zap-O Odorless CA+ Glue from Pacer. FEATURES: An odorless CA that really works!           Great on styrofoam and foam, without a primer.           Medium thick, slow cure.           Works on balsa, plywood and most other hobby materials.           No-more-tears formula.           Won't fog most clear plastics. INCLUDES: One 20 Gram Bottle of Zap-O Odorless CA+ Glue. SPECS:    20 Grams

179,-

189,-

KJØP
-5%
Charging Bag-B Li-Po 230x295mm VAPEX LiPo-Safe Bag-B 230x295mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended!   Features: Fits many different batteries for most cars, boats & airplanes (including all Traxxas LiPo batteries) Fits inside the storage Bag-E Envelope Style Velcro Flap Size: 230x295mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

89,-

99,-

KJØP
-10%
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)

89,-

KJØP
MEET THE ALL-NEW HOSS 4X4 VXL! The all-new Hoss 4X4 VXL unleashes extreme monster truck fun with the power and speed only Traxxas can deliver. Grab a fistful of throttle and the huge Velineon 540XL motor delivers a massive torque punch to wheelie on command, and then keeps pouring on the thrust for a 96+ KPH top speed. The Torque Biasing Center Drive and heavy-duty shaft-driven 4WD system transfers maximum power to the ultra-aggressive Sledgehammer™ tires. It’s built to absolutely shred any terrain, from dirt and sand to mud and snow. Pitch Hoss hard and fast into a turn and Traxxas Stability Management goes to work behind the scenes to help keep you solidly on track while you’re blazing new trails. Non-stop fun and performance always come first, so Hoss stays true to the Traxxas heritage of rugged strength and durability which is engineered into every component. Drive harder, go faster, hang tougher— Nothing stops the Hoss! 540XL TORQUE For those who believe “there’s no replacement for displacement,” Traxxas has built a monster truck for you. The new Hoss 4X4 VXL packs the same Velineon 540XL brushless motor found in the Maxx extreme monster truck. It’s the largest motor we’ve ever offered in a truck this size. The Velineon VXL-3s speed control rolls out the power smoothly utilizing large 6.5 mm connectors and an integrated cooling fan for fast, reliable fun. EXTREME SLEDGEHAMMER GRIP The Hoss VXL 4X4 relies on huge Sledgehammer tires to put its massive torque to the ground. The 5.3-inch tall Sledgehammers lift the Hoss skyward for superior ground clearance and a menacing stance. The open-block tread design clears away mud and debris for unrivaled traction on loose surfaces. Sledgehammer tires come pre-glued with performance foam inserts and they’re TSM-rated for speeds of 60mph and beyond! ROCK-SOLID DRIVETRAIN A conventional 4-wheel drive system may work for your average RC truck, but average isn’t in the Traxxas vocabulary. We pored over every inch of the Hoss’ drivetrain, strengthening critical areas to handle the 540XL’s immense power. A Torque-Biasing Center Drive outfitted with a steel spur gear replaces a traditional slipper clutch along with a tough aluminum center driveshaft and beefed-up extreme-duty axles. The resulting Hoss drivetrain is a model of both efficiency and brute strength. HOSS 4x4 VXL Data: Length: 514mm Width: 333mm Ground Clearance: 70mm Weight: 2.9kg (without batteries) Height: 212mm Wheelbase: 295mm Front Shock Length: Long Rear Shock Length: XX-Long Tires (pre-glued): 133mm Diameter Sledgehammer™ Wheels: 2.8 inches (71mm) Black Chrome Speed Control: VXL-3s™ Motor (electric): Velineon® 540XL Brushless Transmission: Single speed with Torque-Biasing Center Drive Overall Drive Ratio: 10.99:1 Differentials: Sealed, 2-gear Chassis Structure / Material: Modular composite tub Brake Type: Electronic Drive System: Shaft driven 4WD Steering: Dual bellcrank with integrated servo saver Radio System: TQi™ 2.4GHz 2-ch transmitter with #6533 TSM receiver Servo: Waterproof #2075 Top Speed (optional gearing): 96+ kph with 3-cell LiPo and 23/50 gearing Skill Level: 1 Battery Compartment: 162 x 50 x 26mm *35mm with optional battery strap (included) Velineon 540XL Motor Data: Type: Sensorless Brushless 2400Kv Weight: 317g Length: 91mm Diameter: 36mm Connector Type: Traxxas 6.5mm bullet connectors Velineon VXL-3s ESC Data: Input Voltage (cells): 7.2V (6–9 cells NiMH) or 2–3S LiPo Case Size: 56 x 39 x 45mm Weight: 109g BEC Voltage: 6.0 V Reverse Delay: Yes, with lockout Thermal Protection: Two-stage thermal shutdown Ports: Auxiliary fan What’s In The Box: Hoss 4X4 VXL with Velineon® VXL-3s and 540XL Quick Start Guide TQi™ 2.4GHz radio system High quality maintenance tools What You’ll Need: Batteries: Hoss 4X4 VXL requires a single 8.4v NiMH or 2-3s LiPo battery Charger: Traxxas EZ-Peak Live charger (#2971) is recommended for easy and fast charging performance AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

6.295,-

Ikke på lager
Traxxas EZ-Peak Live Dual Charger The new EZ-Peak™ Live Dual charger takes the same great features of the original EZ-Peak Live and supercharges them for faster charging and dual 4S battery charging. Exclusive Traxxas iD technology makes 1-button charging a reality. Just plug in an iD-equipped NiMH or LiPo battery and press start. Nothing could be easier! The new MAXX Charge feature fast charges one battery at the highest rate to get you back in the action sooner than ever, while continuing to supply the remaining available power to the second battery. Take full control over charging features with the revolutionary high-definition full color EZ-Peak Live App for your mobile device. When it comes to fast and easy charging, nothing beats Traxxas! Quick Features on EZ-Peak Live Dual (#2973G) iD Charger: 200 Watt 26+ amp output Recognizes iD-equipped batteries to optimize charger settings MAXX Charge feature gets you back in the action quickly Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface with dual LED charge progress indicators Supports Traxxas EZ-Peak Live Application Audible alerts Dual high-flow cooling fans Advanced Mode for full manual control through EZ-Peak Live App Legacy support for all Traxxas High-Current Connectors Integrated dual balance ports for conventional LiPo batteries Built-in 2-amp USB charger output port Charges Dual 5-8-cell NiMH batteries Charges Dual 2s, 3s, and 4s LiPo Batteries Patent Pending iD Technology There has never been an easier or safer way to charge your batteries than the Traxxas iD system. Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! Traxxas pioneered this exclusive technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. MAXX Power Faster charging means more time behind the wheel. The new MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun. Charging Flexibility The EZ-Peak Live Dual is a true multi-chemistry charger. The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Even the largest 4-cell LiPo batteries are no problem with up to 16 amps of charging horsepower per side. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device. No other charger features EZ-Peak Live’s combination of power and flexibility with iD safety and simplicity. Technology Traxxas pushes the technological envelope to provide you the fastest, most convenient charging experience possible. Not only is EZ-Peak Live Dual our most powerful charger ever, it’s also our most advanced. The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. This is charging the Traxxas way—fast, easy, and more advanced than ever!   App Features: Important Customer Note: Accessing some charger features requires a mobile device with Bluetooth® capability (sold separately) and the Traxxas EZ-Peak Live Application. EZ-PEAK LIVE DUAL (#2973G) SPECIFICATIONS: AC Input: 100-240V, 50-60Hz, 2.35A Charge Current Range: 1.0—26.0A+ Discharge Current Range: 750mAh Current Drain for Balance Ports: 750mAh NiMH Battery Cell Count: 5-8 Cells LiPo Cell Count: 2-4 Cells Dimensions: 204 x 174 x 68mm Compatible Connectors:

2.295,-

2.595,-

KJØP
-12%
This is the Long Temperature and Voltage Sensor from Traxxas. FEATURES: Functions with the Traxxas Link system to display battery voltage and             temperature INCLUDES: Long Temperature and Voltage Sensor with Mounting Screw SPECS:    Length: 14" (356mm)

139,-

159,-

KJØP
-13%
This is the Traxxas Power Cell 11.1V 6400mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 6400mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 3S2P  Continuous Discharge: 25C (160A)  Max Burst Rate: 50C (320A)  Watt Hours: 71.04  Charge Rate: 1C (6.4A)  Max Charge Rate: 2C (12.8A)  Dimensions: 5.4 x 1.6 x 1.7" (138 x 41 x 43mm)  Weight: 17.7oz (502g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 2.5V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

1.395,-

1.495,-

KJØP
-7%
Oil Differential 20m Weight

179,-

KJØP
HPI 160042 - HD IDLER GEAR V2 (27T) HD Idler Gear V2 for the Jumpshot Flux. Made from sintered steel for improved durabiltiy and with updated tooth proflie for lower rolling resistance. Will also fit the Jumpshot V1 & V2, but requires 2x bearings #B021. The following gears must also be used together as they have a unique tooth profile: #160039 - DIFF GEAR 60T or #160040 - HD DIFF GEAR 60T #160041 - TOP SHAFT GEAR SET V2 (22T) #160042 - HD IDLER GEAR V2 (27T) THIS PART FITS THE FOLLOWING KITS / PARTS: JUMPSHOT MT Flux JUMPSHOT SC Flux Jumpshot ST Flux JUMPSHOT SC V2.0 JUMPSHOT SC Flux

89,-

KJØP
HPI 160040 - HD DIFF GEAR 60T HD Diff Gear for the Jumpshot Flux. Made from sintered steel with updated tooth proflie for lower rolling resistance. Will also fit the Jumpshot V1 & V2 when used with the corresponding differental parts. The following gears must also be used together as they have a unique tooth profile: #160039 - DIFF GEAR 60T or #160040 - HD DIFF GEAR 60T #160041 - TOP SHAFT GEAR SET V2 (22T) #160042 - HD IDLER GEAR V2 (27T) THIS PART FITS THE FOLLOWING KITS / PARTS: JUMPSHOT MT Flux JUMPSHOT SC Flux Jumpshot ST Flux JUMPSHOT SC Flux JUMPSHOT SC V2.0 (Optional)

89,-

KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Grease, premium high performance (20cc)

159,-

169,-

KJØP
-6%
Body, Ford Fiesta® ST Rally (painted, decals applied)   Car Type: Rally Scale: 1/10 Painted: Yes Also Including: Decals

839,-

899,-

KJØP
-7%
RPM 80195 Rear A-Arms Blue Traxxas Revo (2) replaces stock Traxxas #5333 & 5333R Quick Notes: – fits the 1:10 scale Revo & E-Revo – replaces stock Traxxas #5333 & 5333R   RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Check out this laundry list of awesome features: Nearly identical in weight to stock A-Arms. Redesigned for incredible durability under the toughest of conditions. More wear resistant than any other material available. Excess A-arm endplay has been eliminated for more accurate caster and toe angle settings. Angled leading and trailing edges eliminate dirt build-up. No low-hanging cross-braces or shock mounting areas providing better ground clearance. Massive shock rod mounting areas for improved rigidity. Available in black, blue, & dyeable white. Less than half the price of aluminum A-arms. Molded from our bulletproof blend of nylons and backed by our world renowned breakage warranty. Sold in sets of one upper and one lower A-arm. Tech Notes: The Traxxas Revo Requires one package of Left Front A-arms, one package of Right Front A-arms, and two packages of Rear A-arms to complete one entire truck.

129,-

KJØP
Trykk her for høyre side.   RPM Front Left Blue A-arms for the Traxxas Summit, Revo & E-Revo (1.0) Quick Notes: Fits the Traxxas Summit, Revo & E-Revo (1.0) Replaces stock Traxxas #5332 Matching Front Right A-arms also available Matching True-Track Rear End Conversion Kit available (for the Revo & E-Revo 1.0) In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo (reference RPM #80212 & #80215) are already compatible with the Summit but due to the extended T-Lock differential on the left side, our Revo front left A-arms would not fit. That is no longer an issue with these A-arms. With a revamped cross-brace to clear the T-Lock differential, our Summit front left A-arms will allow full suspension travel and significantly improve overall suspension durability. RPM front A-arms for the Traxxas Summit are molded from our indestructible blend of engineering grade nylons for unmatched performance and durability. Every RPM molded part in manufactured in the USA and carries with it a limited lifetime warranty against breakage. If you’re tired of replacing broken stock parts over and over, give RPM a try. INCLUDES Front Upper and Lower Left A-Arms  Instruction Sheet

209,-

KJØP
  RPM Front Right Arms for the Summit, Revo 3.3 & E-Revo (old) - Blue Replaces stock Traxxas #5331 Quick Notes: Fits Traxxas Summit, Revo & E-Revo Replaces stock Traxxas #5331 Matching Front Left A-arms are also available Matching True-Track Rear End Conversion Kits are available (for the Revo & E-Revo) RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Features: Nearly identical in weight to stock A-Arms. Redesigned for incredible durability under the toughest of conditions. More wear resistant than any other material available. Excess A-arm end-play has been eliminated for more accurate caster and toe angle settings. Angled leading and trailing edges eliminate dirt build-up. No low-hanging cross-braces or shock mounting areas providing better ground clearance. Massive shock rod mounting areas for improved rigidity. Available in black & blue. Less than half the price of aluminum A-arms. Molded from our bulletproof blend of nylons and backed by our world renowned breakage warranty. Sold in sets of one upper and one lower A-arm.

209,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-17 Metallic Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is the optional .8 Metric Pitch 65 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 65T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.12" (54mm)           Thickness: .23" (6mm)

39,-

Ikke på lager
This is the 58 Tooth Spur Gear.       FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 58T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png