Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Tilbehør El-motorer / Hobbywing 30502002 Multifunction LCD Program Box Pro

Hobbywing 30502002 Multifunction LCD Program Box Pro

Art.nr: HW30502002

595,-

Hobbywing
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Hobbywing Multifunction LCD Program Box Pro

Programmerings boks til programmering og oppdatering av Hobbywing børsteløse regulatorer. Med LCD skjerm, skrollehjul får du et enkelt og oversiktlig redskap til programmering. Boksen har også en innebygget batterisjekker til balanseringsplugg, USB-C og futabakontakt strømstøtte.

Kompatibel med
XeRun & EzRun MAX series (V2.0 og nyere), Platinum og SEAKING PRO series i tilleg til noen ESC`er fra QUICRUN serien.

Spesifikasjoner

Størrelse 13.3x8.7x4.5mm
Vekt 85g
Inngangspenning 5V - 12,6V


OBS!
Hvis regulator ikke har BEC er det nødvendig med et eget batteri for å kunne bruke programmerings boks.

Produsent

Hobbywing

Kunder kjøpte også

Hovedbilde Hobbywing EzRun Combo MAX5 HV G2 - 56118SD 1100kV ... Hovedbilde Hobbywing EzRun Combo MAX5 HV G2 - 56118SD 1100kV ...
Hobbywing EzRun Combo MAX5 HV G2 - 56118SD 1100kV ...
EZRUN MAX5 HV G2 6-12S LiPo Sensored Brushless ESC & 56118SD G2 1100KV Motor Combo 12S HV ESC, enhanced performance The Max5 HV G2 ESC is designed to work in full-sensored mode at all times when it is paired with HOBBYWING EZRUN 56118 G2. The ESC supports up to 12s LiPo with a maximum output current of up to 250A. The strong explosive, stable output power, together with an excellent low-speed linearity, ensures the ESC meets various application requirements such as; violent start-up, straight-line high-speed, flying slopes, low-speed walking, etc. Intelligent freewheeling technology - Strong drive & Low temperatures The innovative intelligent freewheeling technology effectively reduces heat generation and enables the ESC to have higher driving efficiency. With the addition of super-high power design, operating temperature is drastically lowered (approximately 30 degrees) to improve overall stability and reliability of the ESC. Note: Under heavy load conditions, the temperature of MAX5 HV G2 is only slightly higher than that of MAX4 HV. High protection level, all-weather operation The IP-67 waterproof rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Capacitor upgrade - More secure protection Compared with the previous generation (MAX5 ESC), the total capacity of the capacitor has increased by 45% (1260uF). The super large capacity ensures that 5th scale models do not need external capacitors. In addition, the built-in capacitor thermal protection function of the ESC is always in safe operating state. Powerful BEC The ESC has a built-in super BEC with a maximum output current of up to 25A. The output voltages are switchable between 6V/7.4V/8.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Built-in anti-spark design - Multi-directional protection The ESC has a built-in anti-spark circuit to protect the battery plug from damaging upon using a higher voltage battery(6-12S), and avoids any injuries. Perfect combination with EZRUN 56118 SD G2 motor Achieve the perfect compatibility when used together with EzRun 56118 SD G2 motors. Avoid damaging the motor from overheating with the software protection function. Note: Non-Hobbywing EzRun 56118 SD G2 motors cannot realize motor overheat protection Record and store data in real time to keep track of the running status Connect the ESC to the OTA Bluetooth module, and through the mobile phone APP, you are able to view real-time data and operating status such as; throttle, voltage, current, temperature, speed, etc. Note: Due to the Bluetooth transmission distance, the effective distance is only about 5m! New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the ESC protection level and solves waterproof problems faced by traditional interfaces. Please Note: This ESC supports sensored motors with common interfaces. Sensor wire needs to be purchased separately! ESC Specs: Type: 1/5, Brushless, Sensored, WP ESC Cont./Peak Current: 250A/1600A Input Voltage: 6-12S LiPo BEC Output: 6V/7.4V/8.4V adjustable, continuous current 8A (Switch-mode) Input Wires: 8AWG-200mm Input Connectors: No Input Connectors: 8.0mm Bullet Connectors (Female) Firmware Upgrade: Supported Size: 94.5x59.4x50.9mm Weight: 428.5g (Included input wires) Motors: 56118 size motors Vehicles: 1/5 Truck & Buggy. Examples: Losi DBXL-E, Losi 5T Electrified, ARRMA Kraton 8S & ARRMA Outcast ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Independent programming port Sensored mode - Enhanced performance The motor is strong, explosive, and has a stable output power with an excellent linearity at low speed to allow the vehicle to easily realize various maneuvers. The control is easy when there power is limitless be it violent start-up, straight-line high-speed, flying slopes, etc. The perfect match for EzRun MAX5 HV G2 ESC The motor achieves perfect compatibility when used together with the EzRun MAX5 HV G2 ESC. The ESC/Motor combination is sensored and provides a smooth and precise control experience to the users. It is equipped with overheat thermal protection function to avoid overheating the motor. High protection level - All-weather operation IP67 Rating provides excellent waterproof and dustproof performance, and can easily cope with various weather conditions and harsh environments. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak it for a long time to avoid damaging the product. New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the motor protection level and solves waterproof problems faced by traditional interfaces. Detachable modular design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for daily cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/5, Brushless, Sensored Motor Poles: 4 KV Rating: 1100KV LiPo Cells: 6-8S LiPo No-load Current: 8A O.D.: 56mm Length: 119.2mm Shaft Diameter: 8mm Connectors: 8mm Male Weight: 1287g Front Bearing: OD22 x ID8 x T7mm Rear Bearing: OD19 x ID8 x T6mm ESC: EZRUN MAX5 HV G2 Vehicles: 1/5 Buggy & Truck. Examples: Losi DBXL-E & Losi 5T Electrified

4.995,-

5.295,-

KJØP
-6%
Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair This is a heavy duty gold plated connector with built-in antispark resistors that are great for high powered electric models. The QS8-S connector gives you a constant charging of the capacitors on the ESC and allows the battery to be connected without sparks on your ESC when you first plug in. Features: HEAVY DUTY Built in Anti-Spark Function (5.1 ohm resistor) Not compatible with our EC8 connector Specs: Continuous Current: 110A Max Peak Current: 500A Max Wire Size: 6AWG (aprox 6-7mm dia of the exposed wire) Max outer dia of the wire insulation: 8.8mm Connectors: 8mm Gold Plated Brass Case Material: Fiber Reinforced Nylon Length (total assembled): 60.9mm Width: 29.7mm Height: 15.4mm Weight: 41.7g

159,-

219,-

KJØP
-27%
Hovedbilde BSD 808-003 M5 LOCKNUT 6PCS
BSD 808-003 M5 LOCKNUT 6PCS
M5 LOCKNUT 6PCS

35,-

KJØP
Hovedbilde Hitec 57345S Servo Extension 12
Hitec 57345S Servo Extension 12"
   This is a 12" Servo Extension by Hitec. FEATURES: This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Plugging into receiver and servo SPECS: Length: 12" (304mm) COMMENTS: Wire color code: Hitec- Black: negative Red: positive Yellow: signal

49,-

59,-

KJØP
-17%
Hovedbilde Hitec 57343 9
Hitec 57343 9" Female Servo Connector
9" Female Servo Connector.

45,-

KJØP
Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Hovedbilde Tamiya 56553 TOW TRUCK ACTUATOR SET 1/14 Hovedbilde Tamiya 56553 TOW TRUCK ACTUATOR SET 1/14
Tamiya 56553 TOW TRUCK ACTUATOR SET 1/14
Electric Actuator Set for 1/14 Scale R/C Tow Truck Dette settet er nødvendig for å fullt ut operere bergings bilen fra Tamiya. Dette gjør at “brillen” kan opereres fullt ut. This set allows control of the winch boom/underlift on our brand new Volvo Globetrotter 750 8×4 Tow Truck model (Item 56362). Fit it, and use your transmitter to raise and lower the boom smoothly and steadily. 1/14 RC This is an assembly type parts set for raising and lowering the winch boom / underlift of the RC tow truck by RC operation. It consists of a spindle cylinder that expands and contracts with a high-precision geared motor, and an ACU-02 unit that controls the motor. If you put the front wheel of the 1/14 RC trailer head on the tire fork of the underlift and raise the winch boom, you can run in the towed state as it is. It is also equipped with a limit switch that detects the angle of the winch boom and automatically stops, and a clutch mechanism that protects the mechanism from overload. With a manual switch. Consists of a geared motor, spindle cylinder, ACU-02 unit that controls the motor, limit switch, power supply branch cord, manual toggle switch, etc. Set Contents/Information • ACU-01 Actuator Control Unit x1 • 7.2V Geared Motor (ratio: 64:1) • The geared motor moves the spindle shaft and links, which raises the boom at a slow and steady speed. The attached underlift moves in conjunction, too! • A toggle switch also allows manual operation. • When fitted, this system allows your truck to tow loads such as other tractor truck heads (without trailer). • Clutch system is installed to mitigate potential damage from overloads.

3.295,-

3.495,-

KJØP
-6%
Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ... Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Hovedbilde SkyRC SK100081 e3-V2 2-3S LiPo Charger 240VAC Hovedbilde SkyRC SK100081 e3-V2 2-3S LiPo Charger 240VAC
SkyRC SK100081 e3-V2 2-3S LiPo Charger 240VAC
An economical 2-3S LiPo balancing AC charger - SkyRC e3-V2. The e3 Version 2 balance charger also works great for our Airsoft 2-3S LiPo batteries with XH balance connector. Specifications: AC Input: 100-240VC,50-60Hz Battery Type: LiPo Balance Connector: XH Cell Count: 2-3 cells Charge Current: 1.2A Max Cell Terminate Voltage: 4.2V ± 0.02V Circuit Power: 11W ± 10% Dimension: 88 x 57 x 35 mm Weight: 103 g

299,-

KJØP
Hovedbilde Bronto Ladekabel - 4mm til T-Plug (Deans)
Bronto Ladekabel - 4mm til T-Plug (Deans)
Bronto Ladekabel - 4mm til T-Plug (Deans)   Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling.   Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2    T-plug (Deans) male

75,-

KJØP
Hovedbilde DynoMAX 9569 Connector Bullet 5mm Male Car 10pcs Hovedbilde DynoMAX 9569 Connector Bullet 5mm Male Car 10pcs
DynoMAX 9569 Connector Bullet 5mm Male Car 10pcs
INFORMATION Low-profile 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors. Low Resistance Gold Plating 2U-3U Weight: 2.5 g (each) Diameter: 5 mm Depth/Length: 16 mm Flange thickness: 2.3 mm Package Includes: 10 pcs of male connectors   Low-profile 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors.   Low Resistance Gold Plating 2U-3U Weight: 2.5 g (each) Diameter: 5 mm Depth/Length: 16 mm Flange thickness: 2.3 mm   Low-profile 5 mm bullet male connectors for use with high-powered electric RC cars that use LiPo batteries with bigger 5 mm female connectors.   Low Resistance Gold Plating 2U-3U Weight: 2.5 g (each) Diameter: 5 mm Depth/Length: 16 mm Flange thickness: 2.3 mm

149,-

KJØP
Hovedbilde Traxxas 8356 Wheel Hubs Hex (disc brake rotors) (4)
Traxxas 8356 Wheel Hubs Hex (disc brake rotors) (4)
Wheel hubs, hex (disc brake rotors) (4)

49,-

KJØP
Hovedbilde Traxxas 8367 Brake Calipers Red Front and Rear (4)
Traxxas 8367 Brake Calipers Red Front and Rear (4)
Brake calipers (red), front (2)/ rear (2)

39,-

KJØP
Hovedbilde Traxxas 8341G Turnbuckles Front and Rear Alu Green ...
Traxxas 8341G Turnbuckles Front and Rear Alu Green ...
Turnbuckles, aluminum (green-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench

489,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png