Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Børsteløs regulator / Børsteløs bil regulator / Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored WP ESC 1/8
-6%

Hobbywing 30103205 EzRun MAX8 G2S 160A 3-6S Sensored WP ESC 1/8

Art.nr: HW30103205

1.695,-

1.795,-

- 6%

Hobbywing
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Hobbywing HW30103205 - EzRun MAX8 G2S ESC

  • The esc has an innovative waterproof sensor interface,enhancing the overall waterproof and dustproof performance. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation.
  • Built-in ultra-powerful switch mode BEC and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos.
  • Supports turbo timing setting, the timing response is remarkable when used with the matching motor.
  • Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection.
  • The built-in (integrated in the switch) Bluetooth function allows for setting and upgrading the esc by directly connecting to the mobile app, without any additional devices, making it simpler and more convenient
  • Data logging function to view various running data on the HW LINK app
  • Supports the firmware upgrade of the ESC, you can enjoy the latest functions


Extreme output, easy to control
The ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably.

Optimized hardware, increases in stability and reliability
Based on the MAX8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further improved.

  • Optimized hardware design
  • Intelligent freewheeling technology


Built-in Bluetooth, directly connected to the mobile APP
The ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter settings, data reading, firmware upgrades other operations.
Note: The data includes throttle amount, voltage, current, temperature, speed, etc.

Built-in data logging function, ease of obtaining power operating status
The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs.
Note: Due to transmission distance of bluetooth, the effective distance is only about 5m!

Intelligent fan start and stop function
The ESC fan does not run when the ESC temperature is low.The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range.

Efficient cooling system
A frameless fan with patented technology is used. The large flow of air from the side of the fan effectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the optimal operating temperature.

High level of protection
Excellent waterproof and dust-proof performance (IP67)

  • Cope with harsh environments, various climate conditions all-weather operation capabilities


1/8th power system turbo timing technology
Turbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing.

  • The maximum speed can be increased by approximately 25% (EzRun 4268/4278SD G2 motors)

Capacitor overheating protection
The Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage.

Buil-in Super BEC
A maximum output current of up to 15A

  • The output voltage can be switched in three levels of 6V, 7.4V & 8.4V
  • The built in super BEC allows racers to use high power, high voltage servos.


Waterproof Sensor Harness
The proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems. Using a Hobbywing Adaptor (optional) normal/standard sensor motors can be used as well.
Note: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors.

Specs:

  • Brushless, Sensored, Waterproof 1/8 ESC
  • Cont./Peak Current: 160A/1050A
  • Input Voltage: 3-6S Lipo
  • BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode)
  • Input Wires: 10AWG-150mm
  • Output Wires: No
  • Input Connectors: XT90
  • Output Connectors: 6.5mm Bullet Connectors (Female)
  • Fan Size: 30x30x10mm
  • Fan Voltage Range: 6V/7.4V/8.4V
  • Fan Powered by: BEC
  • Size: 60x48x40.5mm
  • Weight: 192g
  • Firmware Upgrade: Supported


ESC Programing via:

  • SET Button on ESC: Not Supported
  • LED Program Box: Not Supported
  • LCD G2 Program Box: Not Supported
  • LCD PRO: Not Supported
  • OTA Programmer: Not Supported
  • Program Port: Built-in Bluetooth


Data Recording:

  • Extreme value: Supported
  • Real-time Data: Supported
  • Historical data (Graph): Supported


Applications:

  • Motors: Sensored brushless motors / Sensorless brushless motors
  • Vehicles: 1/8th On-road, Short course trucks & Monster trucks
  • KV Rating/T Count: With 4S Lipo: KV≤3000; With 6S Lipo: KV≤2400 4278 size motor

Produsent

Hobbywing

Relaterte produkter

 

Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ... Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Art.nr: HW30402800
Copied
Sensorbasert børsteløs motor på 2250KV. Passer til bl.a. 1/8 konkurranse bruk ved bruk av 3-6s LiPo. Anbefales i bruk sammen med Hobbywin MAX8 ESC.   Sensormodus & høy effekt EZRUN-serien av motorer er kjent for å være dynamiske og dominerende. De er bygget annerledes for å møte behovene til ulike krav på markedet. Den har en sterk utgangseffekt med en utmerket linearitet ved lav hastighet og opererer i fullsensormodus.   En perfekt kombo med EZRun MAX8 G2 ESC Motoren oppnår perfekt kompatibilitet når den brukes sammen med EzRun MAX8 G2 ESC. Den gir ultra-stort dreiemoment. presis håndteringsytelse, og gir en jevn og komfortabel kontrollopplevelse til brukerne.   Materialer av høy kvalitet og utmerket produktdesign Materialene (motorhus, lagre, ultratynne silisiumstålplater, høytemperaturbestandig kobbertråd, eksplosjonssikker rotor, høytoleranselegeringsaksel) er nøye utvalgt og godkjent av våre interne ingeniører. Hobbywing er seriøs når det gjelder å gi brukere en ekstraordinær ytelse over lang tid.   Gjelder for alle værforhold Det vanntette IP-67-systemet garanterer utmerket vanntetting og støvtettingsbeskyttelse. Hele kraftsystemet er i stand til å kjøre på en rekke overflater, inkludert gjørmete, sandete, isete, snødekte og vann uten å skade kraftenheten.   Nytt sensorert kabelinterface Utstyrt med en ny type sensorert kabelgrensesnitt. Det er sterkt anbefalt å bruke motorene fra Hobbywing da det vanntette beskyttelsesnivået er på høyeste nivå (IP67).   Praktisk design for demontering og vedlikehold Motoren har en modulær avtakbar strukturdesign for enkel demontering og daglig vedlikehold. Dette bidrar til å forlenge levetiden til motoren og opprettholde effektiviteten til motoren enkelt.  

1.395,-

1.795,-

KJØP
-22%
Hovedbilde Hobbywing 38030376 EzRun Combo MAX8 G2S SD 4278SD ...
Hobbywing 38030376 EzRun Combo MAX8 G2S SD 4278SD ...
Art.nr: HW38020376
Copied
Hobbywing HW38020376 - EzRun MAX8 G2S ESC + 4278SD 2250kV Sensor Combo The esc has an innovative waterproof sensor interface,enhancing the overall waterproof and dustproof performance. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation. Built-in ultra-powerful switch mode BEC and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos. Supports turbo timing setting, the timing response is remarkable when used with the matching motor. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. The built-in (integrated in the switch) Bluetooth function allows for setting and upgrading the esc by directly connecting to the mobile app, without any additional devices, making it simpler and more convenient Data logging function to view various running data on the HW LINK app Supports the firmware upgrade of the ESC, you can enjoy the latest functions Extreme output, easy to control The ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably. Optimized hardware, increases in stability and reliability Based on the MAX8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further improved. Optimized hardware design Intelligent freewheeling technology Built-in Bluetooth, directly connected to the mobile APP The ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter settings, data reading, firmware upgrades other operations. Note: The data includes throttle amount, voltage, current, temperature, speed, etc. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Intelligent fan start and stop function The ESC fan does not run when the ESC temperature is low.The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. Efficient cooling system A frameless fan with patented technology is used. The large flow of air from the side of the fan effectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the optimal operating temperature. High level of protection Excellent waterproof and dust-proof performance (IP67) Cope with harsh environments, various climate conditions all-weather operation capabilities 1/8th power system turbo timing technology Turbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing. The maximum speed can be increased by approximately 25% (EzRun 4268/4278SD G2 motors) Capacitor overheating protection The Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage. Buil-in Super BEC A maximum output current of up to 15A The output voltage can be switched in three levels of 6V, 7.4V & 8.4V The built in super BEC allows racers to use high power, high voltage servos. Waterproof Sensor Harness The proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems. Using a Hobbywing Adaptor (optional) normal/standard sensor motors can be used as well. Note: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors. Specs: Brushless, Sensored, Waterproof 1/8 ESC Cont./Peak Current: 160A/1050A Input Voltage: 3-6S Lipo BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode) Input Wires: 10AWG-150mm Output Wires: No Input Connectors: XT90 Output Connectors: 6.5mm Bullet Connectors (Female) Fan Size: 30x30x10mm Fan Voltage Range: 6V/7.4V/8.4V Fan Powered by: BEC Size: 60x48x40.5mm Weight: 192g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in Bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported   Hobbywing EzRun 4278-2250Kv 3-6S - Sensored Sport Brushless Motor EzRun 4278SD G2 Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX8 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. The rotor adopts four strong magnetic and high temperature resistant sintered Nd-Fe-B magnets, widens the magnetic tile, provides super torque, and makes the motor have strong explosive force and stable output power. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. High output efficiency, effectively reduce the motor temperature and output more power under the same load. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. EzRun 4278SD G2 Specs: Type: 1/8, sensored, brushless Pole Count: 4 KV Rating: 2250KV LiPo Cells: 3-6S No-load Current: 5.0A Diameter: 42mm Length: 78mm Shaft Diameter: 5mm Weight: 455g Front Bearing: D16xD5xT5mm Rear Bearing: D11xD5xT5mm Applications: Vehicles: 1/8 Trucks & Monster Trucks (Sport)

2.995,-

3.295,-

KJØP
-9%

Kunder kjøpte også

Hovedbilde Yeah Racing YB6027M/S10 RC Ball Bearing (12x21x5mm) 10 ...
Yeah Racing YB6027M/S10 RC Ball Bearing (12x21x5mm) 10 ...
RC Ball Bearing (12x21x5mm) 10 pcs RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specificationa: Yeah Racing (#YB6027MS/10) Ball Bearing (12x21x5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

119,-

129,-

KJØP
-8%
Hovedbilde Traxxas 6494R Pinion Gear 20T 1.0M for 5mm Shaft ...
Traxxas 6494R Pinion Gear 20T 1.0M for 5mm Shaft ...
Traxxas 6494R Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

149,-

159,-

KJØP
-6%
Hovedbilde RPM 80456 Tubular Front Bumper for the Traxxas Revo ...
RPM 80456 Tubular Front Bumper for the Traxxas Revo ...
RPM Tubular Front Bumper for the Traxxas Revo (Silver) Description RPM provides the added protection the Revo needs with unbelievable strength and durability in our tubular front and rear bumpers. RPM bumpers for the Traxxas Revo are made from our bulletproof blend of nylons. RPM nylons are the best material for protecting your Revo since our materials are lightweight, inexpensive, and tougher than anything else available! We’ve re-engineered the front and rear bumpers to improve strength, especially around the screw holes, which eliminates potential weak points, and we’ve designed a recessed flat where with a little creativity, anyone can add in a customized, scale license plate. Additionally, our rear bumper has a flat area perfect for adding a ball stud for a faux ball hitch. Our colors are molded into each bumper so scratches and nicks won’t cut through to a different color underneath. In addition, our chrome bumpers are molded over our metallic silver bumper so scratches won’t show as easily as a stock bumper (where black is the base color).

89,-

KJØP
Hovedbilde RPM 81512 Front Left A-arms for E-Revo 2.0 - ...
RPM 81512 Front Left A-arms for E-Revo 2.0 - ...
RPM Front Left A-arms for E-Revo 2.0 - Black Replaces stock Traxxas #8632 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8632 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81512 & #81515 replace stock Traxxas #8632. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

199,-

KJØP
Hovedbilde RPM 81462 Front Right A-arms for E-Revo 2.0 - ...
RPM 81462 Front Right A-arms for E-Revo 2.0 - ...
RPM Front Right A-arms for E-Revo 2.0 - Black Replaces stock Traxxas #8631 Quick Notes: 5g (per pair) lighter than stock Stronger than stock Replaces stock Traxxas #8631 While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas E-Revo 2.0 are molded from our indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM #81462 & #81465 replace stock Traxxas #8631. RPM E-Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 6491R Pinion Gear 18T 1.0M Pitch for 5mm Shaft ...
Traxxas 6491R Pinion Gear 18T 1.0M Pitch for 5mm Shaft ...
Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 8619R Push Rod Alu Red HD with Rod Ends (2) ...
Traxxas 8619R Push Rod Alu Red HD with Rod Ends (2) ...
Push rods, aluminum (red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)

299,-

KJØP
Hovedbilde Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)
Traxxas 3070X Connector Traxxas iD Male (2) (for ESC)
Traxxas® connector (male) (2) - FOR ESC USE ONLY

65,-

KJØP
Hovedbilde HPI Racing 101299 Front Inner Suspension Shaft 3x57mm ...
HPI Racing 101299 Front Inner Suspension Shaft 3x57mm ...
This is the 3X57mm Front Inner Suspension Shaft For the HPI Racing WR8 and Bullet Series FEATURES Metal construction INCLUDES Two suspension shafts Three E-clips COMMENTS This shaft can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT Flux 2.4GHz RTR 1/10 Bullet ST Flux 2.4GHz RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR

45,-

KJØP
Hovedbilde Gens Ace Bashing G-Tech 3s 5000mAh - 60C - XT90
Gens Ace Bashing G-Tech 3s 5000mAh - 60C - XT90
Produktinformasjon 3s 5000mAh - 60C - Gens Ace Bashing G-Tech XT90 er et godt valg til radiostyrte biler som krever 3s LiPo. Batteriet har dimensjonene 135x43x26mm og veier 343g. XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere.   G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov. G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 343g Størrelse: 135x43x26mm Strømplugg: XT90 Balanseringsplugg G-Tech   Gens ace lipo 5000mah 3S1P 60C battery Suited to the following models:1/8, 1/10 RC car model, such as 1/8 SLEDGE. Fast charging by 5C is available.

629,-

679,-

KJØP
-7%
Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ... Hovedbilde Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Hobbywing 30402800 EzRun 4278 G2 Brushless Motor ...
Sensorbasert børsteløs motor på 2250KV. Passer til bl.a. 1/8 konkurranse bruk ved bruk av 3-6s LiPo. Anbefales i bruk sammen med Hobbywin MAX8 ESC.   Sensormodus & høy effekt EZRUN-serien av motorer er kjent for å være dynamiske og dominerende. De er bygget annerledes for å møte behovene til ulike krav på markedet. Den har en sterk utgangseffekt med en utmerket linearitet ved lav hastighet og opererer i fullsensormodus.   En perfekt kombo med EZRun MAX8 G2 ESC Motoren oppnår perfekt kompatibilitet når den brukes sammen med EzRun MAX8 G2 ESC. Den gir ultra-stort dreiemoment. presis håndteringsytelse, og gir en jevn og komfortabel kontrollopplevelse til brukerne.   Materialer av høy kvalitet og utmerket produktdesign Materialene (motorhus, lagre, ultratynne silisiumstålplater, høytemperaturbestandig kobbertråd, eksplosjonssikker rotor, høytoleranselegeringsaksel) er nøye utvalgt og godkjent av våre interne ingeniører. Hobbywing er seriøs når det gjelder å gi brukere en ekstraordinær ytelse over lang tid.   Gjelder for alle værforhold Det vanntette IP-67-systemet garanterer utmerket vanntetting og støvtettingsbeskyttelse. Hele kraftsystemet er i stand til å kjøre på en rekke overflater, inkludert gjørmete, sandete, isete, snødekte og vann uten å skade kraftenheten.   Nytt sensorert kabelinterface Utstyrt med en ny type sensorert kabelgrensesnitt. Det er sterkt anbefalt å bruke motorene fra Hobbywing da det vanntette beskyttelsesnivået er på høyeste nivå (IP67).   Praktisk design for demontering og vedlikehold Motoren har en modulær avtakbar strukturdesign for enkel demontering og daglig vedlikehold. Dette bidrar til å forlenge levetiden til motoren og opprettholde effektiviteten til motoren enkelt.  

1.395,-

1.795,-

KJØP
-22%
Hovedbilde Power HD 1812MG Waterproof 18kg Hovedbilde Power HD 1812MG Waterproof 18kg
Power HD 1812MG Waterproof 18kg
Power HD 1812MG Waterproof 18kg En god og solid vanntett servo med metallgir for de fleste formål. Med en styrke på 18kg er den godt egnet for alt fra bil til fly og øvrige hobbyprosjekter. Benytter servohorn med 25T (Futaba) splines.   Vekt 56 gram uten ledning Mål 40,7 x 20,5 x 39,5 mm Egnet for 4,5 - 6,0 volt Holdekraft 18kg/cm Hastighet 0.12sec/60° (uten belastning) Temperatur    -20 til 50 grader Presisjon 4us

299,-

329,-

KJØP
-9%
Hovedbilde Radient 010041 XT90 PAIRS WITH CAP END (5PCS)
Radient 010041 XT90 PAIRS WITH CAP END (5PCS)
XT90 PAIRS WITH CAP END (5PCS)

289,-

KJØP
Hovedbilde Absima 100CPS / 10WT Silicone Shock Oil 60ml
Absima 100CPS / 10WT Silicone Shock Oil 60ml
Features: Viscosity 100CPS / 10WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears. ●Scope of delivery : 1 bottle /60ml

79,-

KJØP
Hovedbilde Traxxas 2594 Screws 4x15mm Button-Head Machine (Hex ...
Traxxas 2594 Screws 4x15mm Button-Head Machine (Hex ...
These are the 4x15mm Button Head Machine Screwsfor the Traxxas X-Maxx Monster Truck. FEATURES Steel construction INCLUDES Six 4x15mm Button Head Machine Screws REQUIREMENTS 2.5mm Hex Wrench SPECIFICATIONS Diameter: 4mm Length: 15mm

39,-

KJØP
Hovedbilde Castle Creations 010-0065-14 Pinion Mod-1 Set
Castle Creations 010-0065-14 Pinion Mod-1 Set
NB! Dette settet inneholder 7 stk pinions. Dette gir en pris på 164,- pr stk.   Complete pinion set for your 1/8 Buggy, or Truggy, with Mod-1 gears and a motor with 5 mm shaft. MOD-1 Pinion Gear Set   Material: Steel   Fits electric motors with 5 mm shafts   Includes: 11T, 13T, 15T, 17T, 19T, 21T & 23T

1.149,-

1.199,-

KJØP
-4%
Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter
Flysky FS-GT3B 2.4GHZ Transmitter
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Hovedbilde DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm ...
DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm ...
DynoMAX 9689 XT90 - Ladekabel med XT90 plugg til 4mm bananplugg Ladekabel med XT90 plugg til 4mm bananplugger. Benyttes for lading av batterier med XT90-plugg, og kobles rett i ladere med 4mm bananplugger.

99,-

119,-

KJØP
-17%
Hovedbilde Traxxas 3955 Spur Gear 1.0P 40T Revo
Traxxas 3955 Spur Gear 1.0P 40T Revo
This is a replacement 40T Spur Gear for the Traxxas Revo.                    This gear meshes with the clutch bell. FEATURES: Black plastic construction INCLUDES: One 1.0 metric pitch 40T spur gear REQUIRES: Nothing.  This is a direct replacement part.

39,-

KJØP
Hovedbilde Traxxas 2577 Button Head Screw 3x10mm Revo (6)
Traxxas 2577 Button Head Screw 3x10mm Revo (6)
This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction           Black in Color           Button Head Type           Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

KJØP
Hovedbilde Traxxas 5472 Wheelie Bar Assembled Revo
Traxxas 5472 Wheelie Bar Assembled Revo
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Hovedbilde Traxxas 9543 Suspension Pins Outer Rear 3.5x56.7mm (2) ...
Traxxas 9543 Suspension Pins Outer Rear 3.5x56.7mm (2) ...
Traxxas 9543 Suspension Pins Outer Rear 3.5x56.7mm (2) Sledge Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)

59,-

KJØP
Hovedbilde Traxxas 5678 Gear Locking Differentail Output Summit
Traxxas 5678 Gear Locking Differentail Output Summit
This is the Locking Differential Ouput Gear for use on the                      Traxxas Summit Truck RTR. FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear           One Differential Slider           One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

149,-

169,-

KJØP
-12%
Hovedbilde Traxxas 9015 Body Mount front/rear
Traxxas 9015 Body Mount front/rear
Traxxas HOSS 4x4 VXL Body Mount front/rear

219,-

KJØP
Hovedbilde Traxxas 9012 Tailgate Protector Hoss 4x4
Traxxas 9012 Tailgate Protector Hoss 4x4
 Tailgate protector/ 3x10mm flat-head screw (3)

49,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png