Hopp til innhold
Hjem / Batteri & lader / Batteri / Lipo / Lipo 4 celler 14,8 volt / Alle Lipo 4 celler 14.8 volt / Gens Ace 4s 8000mAh 100C EC5 Bashing G-Tech
-8%

Gens Ace 4s 8000mAh 100C EC5 Bashing G-Tech

Art.nr: GEA8K4S10E5GT

1.195,-

1.295,-

- 8%
Gens Ace

Gens Ace
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

4s 8000mAh -100C - Gens Ace EC5 Bashing Series. Hardcase-batteri for rc-biler. Merk at batteriet er 157x55x42mm i størrelse.Passer blant annet til Arrma Kraton og Outcast 8S. G-Tech XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere.
 

G-Tech

Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov.G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier.

Spesifikasjoner:

Kapasitet: 8000mAh
Spenning: 4S 14.8V
Vekt: 737gram
Størrelse: 157x55x42mm
Strømplugg: EC5

Produsent

Gens Ace

Gens Ace

Kunder kjøpte også

Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair This is a heavy duty gold plated connector with built-in antispark resistors that are great for high powered electric models. The QS8-S connector gives you a constant charging of the capacitors on the ESC and allows the battery to be connected without sparks on your ESC when you first plug in. Features: HEAVY DUTY Built in Anti-Spark Function (5.1 ohm resistor) Not compatible with our EC8 connector Specs: Continuous Current: 110A Max Peak Current: 500A Max Wire Size: 6AWG (aprox 6-7mm dia of the exposed wire) Max outer dia of the wire insulation: 8.8mm Connectors: 8mm Gold Plated Brass Case Material: Fiber Reinforced Nylon Length (total assembled): 60.9mm Width: 29.7mm Height: 15.4mm Weight: 41.7g

159,-

219,-

KJØP
-27%
Hovedbilde Traxxas 5040 Oil Differential 20m Weight
Traxxas 5040 Oil Differential 20m Weight
Oil Differential 20m Weight

179,-

KJØP
Hovedbilde Traxxas 7862X Tires & Wheels Gravix Belted / XRT Race ...
Traxxas 7862X Tires & Wheels Gravix Belted / XRT Race ...
Traxxas 7862X Tires & Wheels Gravix Belted / XRT Race Black Chrome (2) Tires & wheels, assembled, glued (XRT® Race black chrome wheels, Gravix™ belted tires, dual profile (4.3" outer, 5.7" inner) foam inserts) (left & right) Belted Gravix™ low-profile 7.4″ x 4.0″ tires deliver game-changing performance on the track or in the wild. The directional tread pattern provides excellent traction and runs quieter than typical off-road tires. Lightweight belting in the carcass maintains the tire's shape for a larger contact patch, more grip, and responsive handling at any speed.. Gravix tires come pre-mounted to black chrome XRT® wheels with an ultra-tough 8s-rated glue bead for the most extreme high-speed action. Sold as a left and right pair. Fits 24 mm splined hex, front or rear. Accessory part for these models: X-Maxx® XRT® Ultimate XRT®

1.249,-

1.349,-

KJØP
-7%
Hovedbilde Bronto XH Balanseringsforlenger 2s - 20cm Hovedbilde Bronto XH Balanseringsforlenger 2s - 20cm
Bronto XH Balanseringsforlenger 2s - 20cm
Praktisk kabel for å forlenge balanseringskontakten på batterier med XH balanseringskontakt. Gjør det enklere å få sikret ladingen i lipo-ladeposer, eller å lade batteriet uten å ta det ut av modellen. Spesifikasjoner Type XH For antall seller 2s Ledning 22AWG Lengde 20cm

39,-

KJØP
Hovedbilde DynoMax B9589 Connector EC5 5mm pair
DynoMax B9589 Connector EC5 5mm pair
Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Max load: 100-150A Size (together) : L: 33.5 x W20 x H10 mm Weight: 12.7 g (pair) Bullet Connector Diameter: 5 mm Stripped Wire Max dia: 4.3 mm (10AWG) Package includes: 1 pair of EC5 connectors

55,-

KJØP
Hovedbilde Traxxas 7759G Washers motor mount aluminum (green ...
Traxxas 7759G Washers motor mount aluminum (green ...
Traxxas 7759G Washers motor mount aluminum (green anodized) (4)/ 4x18mm BCS (4)

79,-

89,-

KJØP
-11%
Hovedbilde Dynomaxx 9694 Charge Lead EC5 with 4mm Banana ...
Dynomaxx 9694 Charge Lead EC5 with 4mm Banana ...
DynoMAX B9694 - EC5 Charging Lead for Chargers with 4mm Banana Outputs This is a charging lead for batteries with a EC5 connector. It fits chargers that are equipped with 4mm banana connectors. Specs: Battery Connector: EC5 Charger Connector: 4mm Banana Bullets Wires: 14AWG Length: 500mm

85,-

KJØP
Hovedbilde FMS 003 Battery Protection Box Large
FMS 003 Battery Protection Box Large
  The new FMS Battery Protection Steel Boxes are available in three sizes and all have foam rubber padded internals. Specs: Case Material: Army Green Steel External Dimensions: L328 x W185 x H226 mm Internal Dimensions: L290 x W160 x H205 mm (foam rubber padded) Weight: 3.28 kg

999,-

KJØP
Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
Hovedbilde SkyRC T100 Charger 240VAC 0.1-5A 2x50W Hovedbilde SkyRC T100 Charger 240VAC 0.1-5A 2x50W
SkyRC T100 Charger 240VAC 0.1-5A 2x50W
NB! Denne laderen leveres uten ladekabel. Se lengere nede under:  Relaterte produkter. SkyRC T100 Twin-Channel (2x50W) 240VAC Charger Multi-purpose for Most Chemistries With Generic XT60 SkyRC T100 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo / LiFe / Lilon / LiHV / NiMH / NiCd / Pb) simultaneously. Its sleek design allows easy front-loading plug-in convenience of balancing and XT60 ports. It is not only compact in size but also powerful in output with maximum 100W charging power and 5A charging current which makes charging more sufficient. With the new AGM and cold charge modes, the user is free to charge their PB and AGM batteries in cold days. Twin-channel Charger SkyRC T100 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically initiate the charging of 2 batteries at once to their maximum capacity. To top it all, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (NiMH / NiCd / LiPo / LiFe / Lilon / LiHV / Pb) batteries into any of the charging ports.   T100 Specifications: Input Voltage: 100-240VAC (50/60Hz) Power: 2x50W Output Charge Connector: XT60 Output Balance Connector: XH Weight: 500g Size: L90 x W100 x H127 mm Battery Voltage Detection: Yes Anti-Reverese Protection: Yes Short Circuit Protection: Yes Over Current Protection: Yes Beep Sound on Buttons/Alarm: Yes on/off Working Enviroment Temperature: 0-40°C Working Enviroment Humidity: 0-80% Storage Enviroment Temperature: -10-60°C Storage Enviroment Humidity: 20-70% Battery Types: Output Socket: XT60 (XT60 batteries can be connected directly - all other needs an charge lead) NiMH/NiCd: 6-8 cells (7.2-9.6V) Pb: 6/12V LiHV/LiPo/LiIon/LiFe: 2-4 cells Output Current: NiMH/NiCd: 0.1-5A LiHV/LiPo/LiIon/LiFe: 0.1-5A Pb: 0.8-5A Balance: Max 300mA Trickle NiCd/NiMH: 50-300mA & off Operation Modes - NiCd/NiMH: Charge Re-Peak: 1-3 times Operation Modes - LiHV/LiPo/LiIon/LiFe: Balance Charge Storage Operation Modes - Pb: Pb Normal Charge Pb AGM Charge Pb Cold Charge

749,-

799,-

KJØP
-6%
Hovedbilde DynoMAX B9664 Charging Lead EC5 Male to XT60 14AWG ... Hovedbilde DynoMAX B9664 Charging Lead EC5 Male to XT60 14AWG ...
DynoMAX B9664 Charging Lead EC5 Male to XT60 14AWG ...
DynoMAX B9664 - EC5 Charging Lead for Chargers wth XT60 Output This is a charging lead for batteries with a EC5 connector. It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: EC5 Charger Connector: XT60 Wires: 14AWG Length: 500mm

99,-

KJØP
Hovedbilde SkyRC T200 Charger 240VAC/12VDC 12A 2x100W
SkyRC T200 Charger 240VAC/12VDC 12A 2x100W
NB! Denne laderen leveres uten ladekabel. Se lengere nede under:  Relaterte produkter.  SkyRC T200 Dual Balance Charger Sleeker Than Ever T200 comes ready to charge in the most compact design yet while taking up minimal space in the pit area. Only taking up about as much bench space as a pair of battery packs, the charger delivers dedicated 100W integrated power per each of the two complete charging circuits. Inside the case, there’s enough transformer power to fill two batteries simultaneously at up to 12 amps each, that you can pump life into everything from a receiver pack to a 6S LiPo or 15S NiMH or NiCD. All the programmability you expect of a modern higher-level charger is built in! Multiply the Efficiency With Duo With each charging channel programmed and operating independently, T200 allows you to charge two batteries simultaneously, and it will intelligently and automatically charge the packs at once to their maximum capacity. To top of it, the cells being charged do not even necessarily have the same configuration or be of the same chemical type. Multi-purpose for Most Chemistries With Generic XT60 The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead acid). With the almost de facto standard of XT60* interface, plugging prevents reverse polarity and ensures super-solid connection. *Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80℃ thanks to their gold-plated spring pins’ better contact surface area. Versatile With the Addition of AGM and Cold Modes AGM (Absorbent Glass Mat) battery is maintenance free, provides good electrical reliability and is lighter than the flooded lead acid type. However, AGM batteries are far more different than lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode. Optimized Operating Software SkyRC T200 features the so-called AUTO function that sets the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two-way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! Intuitive Operation The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. The charging programs with the same logic as many other chargers by SkyRC, so it will be familiar to many users. But even if T200 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. After one run through the manual, you’ll have it down. Terminal Voltage Control (TVC) The charger allows users to change the end voltage (for expert users only). Portable With a Handle Compact design with the handle ensures the charger is convenient to travel with. Specifications: Case Material: Plastic Case Size: 178x135x96mm Weight: 850g Display Type: LCD Display Backlight: Blue Power: DC Input Voltage: 11-18V AC Input Voltage : 100-240V Charge Wattage: 100W X 2 Discharge Wattage: 10W Battery Types/Cells: LiPo/LiHV/LiFe/LiIon: 1-6cells NiMH/NiCd: 1-15cells Pb: 2-20V Battery Capacity Range: NiMH/NiCd: 100-50000mAh LiPo/LiIon/LiFe/LiHV: 100-50000mAh Pb: 100-50000mAh Charge Voltage: NiMH/NiCd: Delta peak detection LiPo: 4.18-4.25V/cell LiFe: 3.58-3.7V/cell Pb: 1.8-2.0V/cell LiIon: 4.08-4.2V/cell LiHV: 4.25-4.35V/cell Discharge Cut-off Voltage: NiMH/NiCd:0.1-1.1V/cell LiPo:3.0-3.3V/cell LiFe:2.6-2.9V/cell LiIon: 2.9-3.2V/cell LiHV: 3.1-3.4V/cell   Battery Cut-off Temperature: 20ºC / 68ºF-80ºC / 176ºF (adjustable) Reading Voltage Range: 0.1-26.1V/cell Charge Current: 0.1A-12.0A Discharge Current: 0.1A-2.0A Balance Cells: 2-6 cells Balance Current: 500mA/cell Safety Timer: 1-120minutes off Charge Method: CC/CV for lithium types and lead(Pb) batteries Delta-peak Sensitivity for NiMH/NiCd. Memory: 10 different charge/discharge profiles

1.399,-

KJØP
Hovedbilde DynoMAX B9667 Charging Lead XT90 Male to XT60 14AWG ...
DynoMAX B9667 Charging Lead XT90 Male to XT60 14AWG ...
DynoMAX B9667 - XT90 Charging Lead for Chargers with XT60 Output This is a charging lead for batteries with a XT90 connector. It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: XT90 Charger Connector: XT60 Wires: 14AWG Length: 500mm

139,-

KJØP
Hovedbilde Traxxas 102076-4 Maxx Slash 6s Short Course Truck Red Hovedbilde Traxxas 102076-4 Maxx Slash 6s Short Course Truck Red
Traxxas 102076-4 Maxx Slash 6s Short Course Truck Red
Traxxas 102076-4-RED - Maxx Slash 6s Short Course Truck - RED   Short Course Supremacy Traxxas rocked the world 15 years ago with the release of the Slash, launching a short course revolution and a generation of enthusiasts that have propelled Slash to become the best-selling truck in RC. Now, Slash is going even bigger. We MAXXed the Power, Size, Durability, and Excitement! 6s Power Maxx Slash punches harder and faster with brutal 6s power and 112+kph speed. Low center of gravity and new belted tires keep it all in control. Maxx-Sized Slash Being big is good. Being the perfect size for maximum performance is best. Maxx Slash is the perfect size to power aggressively over the roughest terrain imaginable, yet it is still feels light, responsive, and agile. Maxx Strength The Maxx platform has already proven it’s synonymous with durability. The engineering on Maxx Slash continues to innovate, adding even more strength for critical 6s power handling and faster, harder-hitting action. Belted Tires Maxx SC belted tires limit high-speed tire expansion for a larger, flatter contact patch and game-changing precision and control. Tire uniformity is critical for stability, especially at the top of its 112+ kph speed range. Specs: Length: 674mm Width: 363mm Ground Clearance: 39mm Weight (no battery): 5.34kg Height (overall): 245mm Wheelbase: 394mm Shock Length (front): 124mm Shock Length (rear): 124mm Tire Diameter: 134mm Wheel Diameter: 2.2/3.2" (56x81mm) Speed Control: Velineon® VXL-6s Motor (electric): Velineon® 2000 kV Brushless Overall Drive Ratio: 11.38:1 (25/50 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: Module 1.0 Chassis Structure/Material: Hex-reinforced nylon composite Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Double-shear bellcrank Wheels & Tires: Dual-profile SCT wheels with Maxx SC belted tires & foam inserts Radio System: 2-Channel, TQi™ 2.4 GHz Transmitter with TSM® receiver Servo: 2090 Waterproof (285 oz-in torque) Top Speed: 112+ kph with two 3s LiPo batteries and optional gearing (sold separately) Skill Level: 4 Battery Tray: L181xW56xH45mm Required Transmitter Batteries: 4 “AA” Required Vehicle Batteries: 4-6S LiPo (one 4S or two 3S with iD™ connector) Required Transmitter Charger: Traxxas iD™ Velineon 2000kV Motor Specs: Type: 2000kV sensorless brushless Weight: 406g Length: 76mm Diameter: 42mm Connector Type: Traxxas 6.5 mm bullet connectors VXL-6S ESC Specs: Input Voltage (cells): 4–6s LiPo (max: 25.2 volts) Case Size: 58x72x46mm Weight: 207g BEC Voltage: 6.0volts BEC Current Continuous: 10amps BEC Current Peak: 20amps Reverse Delay: Yes, with lockout Ports: RX input, auxiliary fan, Traxxas accessory port What’s In The Box: Maxx Slash, Ready-To-Race short course truck with Traxxas 2000 kV brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi 2.4 GHz radio system High quality maintenance tools Jumper plug (for 4s battery use) What You’ll Need: LiPo Batteries: Traxxas recommends dual 5000 mAh 3-cell 11.1 V Power Cell LiPo batteries for maximum performance. Dual 7600 mAh 7.4 V LiPo batteries or a single 6700 mAh 14.8 V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD™: Traxxas EZ-Peak® Live 4s-capable charger is recommended for easy and fast charging performance (model 2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

9.595,-

10.695,-

KJØP
-10%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png