Traxxas

-7%

Futaba S-U400 Servo Standard 7.9kg/0.13s HV S.BUS2 Bulk w/o serv

Art.nr: FPS-U400B

399,-

~~429,-~~

- 7%

Futaba

Futaba

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Futaba S-U400 Standard Servo HV S.BUS2 - Bulk Pack

Features:

Plastic Gears
High Voltage
S.BUS2
Will replace: S3010, S3152 & S3072HV

Specs:

Rated Voltage: 6-7.4V
Operating Voltage: 4.8-8.4V
Power @ 6.6V: 7.1kg/cm
Speed @ 6.6V: 0.14s/60°
Power @ 7.4V: 7.9kg/cm
Speed @ 7.4V: 0.13s/60°
Size: 40 x 20 x 36.1 mm
Weight: 39g

Produsent

Futaba

Futaba

Relaterte produkter

Hovedbilde Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2

Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2

Art.nr: BULK U300B

Copied

NB! Dette er et helt nytt produkt, men den kommer uten embalasje. Futaba S-U300 Universal Standard Servo This is a new Futaba standard servo with S.BUS(2) function Specs: Plastic Gears Digital / S.BUS2 Input Voltage: 4.8-6V Torque @ 4.8V: 3.5kg/cm Torque @ 6.0V: 4.5kg/cm Speed @ 4.8V: 0.23s/60° Speed @ 6.0V: 0.19s/60° Size: 40.4 x 19.8 x 36.0 mm Weight: 36g

219,-

269,-

-19%

Hovedbilde Futaba S9470SV S.Bus2 High-Voltage 1/10 Car Servo

Futaba S9470SV S.Bus2 High-Voltage 1/10 Car Servo

Art.nr: FPS9470SV

Copied

This is the Futaba S9470SV HV SB2 Servo for 10 scale Car Usage. FEATURES Coreless motor Water protected Metal gears with two ball bearings Programmable and compatible with S.Bus and S.Bus2 systems High voltage handles extra speed and power provided by 2S LiPobatteries INCLUDES S9470SV HV SB2 SX Servo, 1.8" (44mm) long 3-Point Horn, two rubber Grommets, four Eyelets, 3x8mm Servo Horn Screw and Instructions SPECIFICATIONS 6.0V 7.4V Torque: 153oz-in 11.4kg-cm 191oz-in 13.8kg-cm Speed: 0.11 sec/60° 0.09 sec/60° Dimensions: 1-9/16 x 13/16 x 1-7/16" (40 x 20 x 37mm) Weight: 1.9oz (54g) SBus Programmable Defaults Dead Band Degree: 0.25 Damper Factor: 112 Stretcher Gain: 1 Boost: 8 Neutral Offset Degree: 0 Travel Adjust Percentage: 100% Reverse (Normal/Reverse): Nor Stop Mode (Free/Hold): Free Buzzer (On/Off): Off Smoother (On/Off): Off Boost (On/Off): Off

1.099,-

Hovedbilde Hitec HFP-30 Field Programmer

Hitec HFP-30 Field Programmer

Art.nr: 44427

Copied

SERVO PROGRAMMER HFP-30 This is the Hitec HFP-30 Digital Servo Programmer and Universal Servo Tester. FEATURES For the Hitec BLDC/D-series servos; Programs the Servo Speed, Dead Band Width, Direction of Rotation,Fail Safe and Position Program (Neutral/Left/Right) For the HS-7000 series G2 Digital Servos; Servo Speed, Dead Band Width, Direction of Rotation,Fail Safe and Position Program (Neutral/Left/Right) For the HS-5000 Digital Micro Servos; Programs the Servo Speed, Dead Band Width, Direction of Rotation,Fail Safe and Position Program (Neutral/Left/Right) Performs manual and automatic test and receiver pulse width on any brand of servo Large easy-to-read LCD screen Operates on 4.8-8.4V range INCLUDES: Digital Servo Programmer and Universal Servo Tester with Instructions SPECIFICATIONS: Length: 5.2" (132mm) Width: 2.5" (63mm) Height: 0.94" (24mm)

1.295,-

Hovedbilde Futaba S-U305 Servo Standard 8.9kg/0.20s HV S.BUS2 ...

Futaba S-U305 Servo Standard 8.9kg/0.20s HV S.BUS2 ...

Art.nr: S-U305

Copied

Futaba S-U305 Std Servo 8.9kg & 0.20s S3305 based design, Digital Servo without S.BUS connection. Specs: LOW Voltage (6V) operation Torque @ 6V: 8.9Kg/cm Speed @ 6V: 0.20sec/60° Size:40.0 x 20.0 x 38.1mm

449,-

479,-

-6%

Kunder kjøpte også

Hovedbilde Tamiya 58242 1/10 Wild Willy 2000 Kit inkl esc

Tamiya 58242 1/10 Wild Willy 2000 Kit inkl esc

This is the 1/10 scale Wild Willy 2 from Tamiya. It's the 2nd generation Wild Willy, similar to its predecessor in body style only! New features over the older version are: New WR-02 Chassis Design as well as a Pre-Assembled gearbox design. FEATURES: 4 Wheel Independent Suspension w/4 Coil-Over Shocks Pre-Assembled Gearbox with GEAR differential Oversized V-tread tires pre-mounted unto Chrome wheels Wheelie Bar, short wheelbase and rear-mounted battery for Dynamic Stunt Action Plastic Bushings. To hop up to bearings, customer will need 16-5x11mm Bearings. 540 Size Motor INCLUDES: One Willy's Jeep Body (Molded in Olive Drab color) One ESC Four Tires premounted to Chrome Wheels One Driver Figure One Decal Sheet One Pre-Assembled Gearbox w/ Differential One 540 size motor, Pre-mounted to Gearbox One Instruction Booklet REQUIRES: 2-Channel Radio, ESC, 6-Cell Battery, Charger, and paint. SPECS: Length: 12.8" (325mm) Width: 10.7" (272mm) Height: 10.6" (270mm) Weight: 3.8lbs (1710g) Wheels: 1.9" diameter x 2.25" wide (a very unique size)

2.195,-

2.395,-

-8%

Hovedbilde Yeah Racing YB0081BX Bearing Set For 1:12 Wild Willy 2

Hovedbilde Yeah Racing YB0081BX Bearing Set For 1:12 Wild Willy 2

Yeah Racing YB0081BX Bearing Set For 1:12 Wild Willy 2

Yeah Racing RC PTFE Bearing Set with Bearing Oil For 1:12 Wild Willy 2 RC Monster Truck RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.) Specifications: Telfon Bearing For Tamiya Wild Willy 2 RC Monster Truck #YB0081BX Material: Metal Includes: Bearing (18pcs) Bearing Oil (15ml) #YA-0215 Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

199,-

219,-

-9%

Hovedbilde Savox B-08KG Servo Budget 8kg 0.15s 40.7x20x39.9mm

Hovedbilde Savox B-08KG Servo Budget 8kg 0.15s 40.7x20x39.9mm

Savox B-08KG Servo Budget 8kg 0.15s 40.7x20x39.9mm

Savox B-08KG - Budget Analog Servo, Standard Size & Metal Gear "Budget by Savox" analog servos offer the same level of quality as the digital servo line, but at a much lower price, making them a great value! Specifications: Torque @ 4.8v: 6kg/cm Speed @ 4.8v: 0.19s/60 deg Torque @ 6v: 8kg/cm Speed @ 6v: 0.15s/60 deg Dimensions: L40.7 x W20 x H39.9mm Weight: 52g Specs: Length: 40,7 mm Height: 39,9 mm Width: 20 mm Weight: 52 g Max Voltage: 6,0 V Speed at 4,8V: 0,19 sec/60° Speed at 6,0V: 0,15 sec/60° Torque at 4,8V: 6,0 kg/cm Torque at 6,0V: 8,0 kg/cm Features: Analog , Metal Gears Delivered With: Horns , Mounting Hardware

249,-

269,-

-7%

Hovedbilde Bronto 7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg

Bronto 7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg

7.2V 3000mAh - Bronto SP - Ni-Mh - Tamiya plugg Lengde - 135mm Bredde - 47mm Høyde - 24mm

295,-

Hovedbilde Power HD 9001MG SERVO (9.8KG/0.14SEC)

Power HD 9001MG SERVO (9.8KG/0.14SEC)

SERVO HD9001MG (9.8KG/0.14SEC)

249,-

269,-

-7%

Hovedbilde Tamiya 56553 TOW TRUCK ACTUATOR SET 1/14

Hovedbilde Tamiya 56553 TOW TRUCK ACTUATOR SET 1/14

Tamiya 56553 TOW TRUCK ACTUATOR SET 1/14

Electric Actuator Set for 1/14 Scale R/C Tow Truck Dette settet er nødvendig for å fullt ut operere bergings bilen fra Tamiya. Dette gjør at “brillen” kan opereres fullt ut. This set allows control of the winch boom/underlift on our brand new Volvo Globetrotter 750 8×4 Tow Truck model (Item 56362). Fit it, and use your transmitter to raise and lower the boom smoothly and steadily. 1/14 RC This is an assembly type parts set for raising and lowering the winch boom / underlift of the RC tow truck by RC operation. It consists of a spindle cylinder that expands and contracts with a high-precision geared motor, and an ACU-02 unit that controls the motor. If you put the front wheel of the 1/14 RC trailer head on the tire fork of the underlift and raise the winch boom, you can run in the towed state as it is. It is also equipped with a limit switch that detects the angle of the winch boom and automatically stops, and a clutch mechanism that protects the mechanism from overload. With a manual switch. Consists of a geared motor, spindle cylinder, ACU-02 unit that controls the motor, limit switch, power supply branch cord, manual toggle switch, etc. Set Contents/Information • ACU-01 Actuator Control Unit x1 • 7.2V Geared Motor (ratio: 64:1) • The geared motor moves the spindle shaft and links, which raises the boom at a slow and steady speed. The attached underlift moves in conjunction, too! • A toggle switch also allows manual operation. • When fitted, this system allows your truck to tow loads such as other tractor truck heads (without trailer). • Clutch system is installed to mitigate potential damage from overloads.

3.295,-

3.495,-

-6%

Hovedbilde Tamiya 56551 MFC LED (3mm Yellow x2 1,100)

Tamiya 56551 MFC LED (3mm Yellow x2 1,100)

Tamiya 56551 MFC LED (3mm Yellow x2 1,100) Tamiya is delighted to announce the release of these LED products, which will allow you to light up longer truck models. They are of course compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to use, with easy-use connectors and tag stickers included. Contents/Information • 1,100mm Yellow LED Cables x2 • Each cable features a 3mm diameter yellow LED for use as a turn signal.

139,-

Hovedbilde Tamiya 56549 MFC LED (3mm Red 1,100)

Tamiya 56549 MFC LED (3mm Red 1,100)

Tamiya MFC LED (3mm Red 1,100) Tamiya is delighted to announce the release of these LED products, which will allow you to light up longer truck models. They are of course compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to use, with easy-use connectors and tag stickers included. Contents/Information • 1,100mm 3mm Red LED Cable x1 • Features two 3mm diameter red LEDs for use as brake lamps.

139,-

149,-

-7%

Hovedbilde Tamiya 56550 Led Light For MFC White 1100mm White ...

Tamiya 56550 Led Light For MFC White 1100mm White ...

This TAMIYA LED product allows you to light up longer R/C truck models. They are compatible with Tamiya’s famous and super-realistic Multi-Function Control units MFC-01 and MFC-03. LEDs come ready to use, with easy-use connectors and tag stickers included. • 1,100mm 3mm White LED Cable x1 • Features two 3mm diameter white LEDs for use as reverse lights.

139,-

Hovedbilde Carson 501006 Reflex Stick Set 6 Channels 2.4 GHZ V2

Carson 501006 Reflex Stick Set 6 Channels 2.4 GHZ V2

Reflex Stick II Carson-Modell Sport er en rimelig, moderne og teknologisk avansert 6-kanals fjernkontroll for universell bruk i mange RC biler, båter og skip. Det kan styres uavhengig 6 kanaler via 2 joysticker og 2 switcher (1x knapp / 1x bryteren). REFLEX STICK 6-kanals system er fullt kompatibel med alle MFC og DMD enheter fra TAMIYA, siden trimming gjøres med glidebrytere. (Manuelle trimmer) Anbefalt tilbehør: Reserve mottaker 500501537 AA-batterier (4 stk) Leveringsomfang: 6-kanals 2,4 GHz sender, 6 kanals mottaker og multi-språk manual. Tekniske detaljer: • Driftsspenning senderen 4,8 til 6 V (4 AA-batterier) • 2,4 GHz FHSS system (Frequency Hopping Spread Spectrum) • trinnløst variable fullt proporsjonale kanaler • servo revers for alle kanaler (reversering av retning) • Trim funksjon • Strømforsyning til mottakeren 4,8-6V mulig (BEC) • Uni-kontakt system Graupner-J / R • Uttak for lading på TX • Batteri LED statusindikasjon

1.495,-

1.895,-

-21%

Hovedbilde Du-Bro 340 Fuel Filter Medium

Du-Bro 340 Fuel Filter Medium

INFORMATION This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing. This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing. INCLUDES One Medium In-Line Fuel Filter REQUIREMENTS 2.4 mm (3/32") id fuel tubing SPECIFICATIONS Length: 28 mm This is a Medium In-Line Fuel Filter from Du-Bro. Constructed of two threaded aluminum parts which separate for ease in cleaning. Includes a 130 micron mesh screen filter to filter out the smallest of particles and an O-ring to properly seal against leakage. Suitable for gasoline or glow fuel. Is installed in fuel tubing between the carburetor and fuel tank. Fits 2.4 mm (3/32") id tubing. INCLUDES One Medium In-Line Fuel Filter REQUIREMENTS 2.4 mm (3/32") id fuel tubing SPECIFICATIONS Length: 28 mm INCLUDES One Medium In-Line Fuel Filter REQUIREMENTS 2.4 mm (3/32") id fuel tubing SPECIFICATIONS Length: 28 mm Width: 11 mm

99,-

109,-

-9%

Hovedbilde Du-Bro 677 Fuel Line Clips medium 4pcs

Du-Bro 677 Fuel Line Clips medium 4pcs

Du-Bro's Fuel Line Clips help prevent fuel tubing from coming off of fuel fittings for carbs, fuel filters, fuel tanks and more. Available in two sizes: 3/32" (2.3 mm) and 1/8" (3 mm). 4/pkg FEATURES Great for easy connections between fuel lines and fuel filters. INCLUDES Four 3/32" fuel line clips SPECIFICATIONS Inside diameter: 3/32" (Medium sized fuel tubing)

39,-

Hovedbilde Tamiya 86019 PS-19 Polycarbonate Spray Camel Yellow 3 ...

Tamiya 86019 PS-19 Polycarbonate Spray Camel Yellow 3 ...

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-19 Camel Yellow). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

Hovedbilde Kyosho 82243S Orion WP Brush ESC 45A. ORI65130 S-Plug

Kyosho 82243S Orion WP Brush ESC 45A. ORI65130 S-Plug

82243S ORION WP BRUSH ESC 45A.ORI65130 S-Plug Team Orion 45A brushed motor water proof ESC. LiPo capable. Forward/Reverse. Genuine Kyosho replacement parts make maintenance fast and easy!

499,-

549,-

-9%

Hovedbilde GT Power N802 Nimh CHARGER 2A – 20W AC GTP116

Hovedbilde GT Power N802 Nimh CHARGER 2A – 20W AC GTP116

GT Power N802 Nimh CHARGER 2A – 20W AC GTP116

G.T.Power N802 Nimh CHARGER 2A – 20W AC N802-laderen er en enkel, rask og sikker NiMH lader i en kompakt utførelse. Med det idiotsikre “plug and charge” -grensesnittet kobler du bare til batteriet og trykker på knappen, hvorpå laderen automatisk velger riktig ladestrøm. Støtter 4 – 8 celler med opptil 2 ampere lading. Dette gir deg en minimal ventetid. Laderen kobles til 220V, og gir ca 2A lading. Svært få enkle ladere kombinerer 220V AC-inngang, og en 2-amp lade mulighet. Dette er en automatisk lader, og kutter ladingen da batteriet når sin “peak” eller topp. AC inngang Har toppdeteksjonsladekretser. (Delta peak) Støtter 4 – 8 NiMH / NiCd-celler. Mikroprosessor kontrollert. 2A lade strøm (maks. 20W). Enkel betjening av en knapp. Inkluderer Deans (han) kontakt og Tamiya (han) Kompakt design 1x N802 NiMH / NiCd lader 1x strømledning 1x Tamiya-adapter 1x bruksanvisning The N802 charger is a simple, capable and safe NiMH peak detection charger in a compact package. With its foolproof ‘plug and charge’ interface you just connect your battery and press the button, whereupon the charger automatically selects the appropriate charge current. Supporting 4 – 8 cells at up to 2 amps on AC power, it gets you going again with a minimal wait. Sleek and compact in design this neat unit will also help to keep your workspace uncluttered. Very few chargers combine the simplicity of AC input, a 2 amp cabability, and the safety of peak detection charging for NiMH batteries, with such style and affordability. AC input power. Features peak detection charging circuitry. Supports 4 – 8 NiMH / NiCd cells. Micro processor controlled. 2A charge rates (20W maximum). Simple one button operation. Includes Deans (male) connector and Tamiya (male) Compact design 1x N802 NiMH/NiCd charger 1x Power lead 1x Deans to Tamiya adaptor 1x Instruction manual

269,-

289,-

-7%

Hovedbilde Vapex NiMH Battery 7,2V 4000mAh Tamiya connector

Vapex NiMH Battery 7,2V 4000mAh Tamiya connector

7.2V 4000 mAh NiMH Stick-Pack Battery with Tamiya Connector Specs: Battery: 6-cell 7.2V NiMH Stick Pack Capacity: 4000 mAh Connector: Tamiya Wires: 14AWG Fast Charge: 4A Peak Slow Charge: 400mAh 12-16 hours Size: L135 x W46.5 x H24 mm Weight: 379 g

369,-

Hovedbilde PT100 ZAP-A-GAP CA+ BRUSH ON 1/4 OZ

PT100 ZAP-A-GAP CA+ BRUSH ON 1/4 OZ

Fyller større sprekker og hull Du har 7-10 sekunder for posisjonering av det som skal limes Tørker i 20 sekunder Kan aksleres med Kicker Fungerer best på: Metall, tre, gummi, keramikk, de fleste plast typer

59,-

Hovedbilde Fuse Overgang - Male Tamiya til Female T-Plug

Fuse Overgang - Male Tamiya til Female T-Plug

Praktisk og kompakt overgang fra Tamiya til Deans. Ypperlig om man f.eks har batterier med Tamiya-kontakter som skal benyttes mot et Deans oppsett.

45,-

Hovedbilde Kyosho 70702 MOTOR 540 CLASS G-SERIES G27 SINGLE

Kyosho 70702 MOTOR 540 CLASS G-SERIES G27 SINGLE

MOTOR 540 CLASS G-SERIES G27 SINGLE

295,-

Hovedbilde Tamiya 86059 PS-59 Dark Metallic Blue 100ml Spray Can

Tamiya 86059 PS-59 Dark Metallic Blue 100ml Spray Can

This is Tamiya Color Spray Lacquer for Polycarbonate (PS Dark Metallic Blue). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling An appropriate amount of paint for finishing one R/C model This paint is impervious to oil and fuels, so it can be safely used on gas-powered R/C bodies The color of the lid represents the color of paint INCLUDES: PS Dark Metallic Blue Spray Can of Lacquer SPECS: Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models Highly flammable

109,-

Hovedbilde Traxxas 3232X Super Duty Long Glow Plug

Traxxas 3232X Super Duty Long Glow Plug

This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines Suited for the varied throttle range of off-road racing Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench for installing in cylinder head Glow Fuel with 10%-20% nitro content

119,-

139,-

-14%

Hovedbilde Tamiya 85010 Spray Lacquer TS-10 French Blue 3 oz

Tamiya 85010 Spray Lacquer TS-10 French Blue 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer French Blue Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

Hovedbilde Tamiya 81502 Acrylic Mini X-2 White 1/3 oz

Tamiya 81502 Acrylic Mini X-2 White 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic White REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-

Hovedbilde Tamiya 81506 Acrylic Mini X-6 Orange 1/3 oz

Tamiya 81506 Acrylic Mini X-6 Orange 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Orange paint REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-

Hovedbilde Fly-Sky FS-GR3E 3 channel receiver for FS-GT2B Radio

Fly-Sky FS-GR3E 3 channel receiver for FS-GT2B Radio

FlySky FS-GR3E receiver The FS-GR3E 3-channel receiver operates in the AFHDS system at 2.4 GHz. The receiver is compatible with FlySky GT2, GT2B, GT3, GT3B, GT3C, T6, CT6B, GR3E and TH9X transmitters. The receiver is designed for RC trucks, buggies, and boats.

219,-

249,-

-12%