Traxxas

Futaba S-U400 Servo Standard 7.9kg/0.13s HV S.BUS2

Art.nr: FPS-U400

459,-

Futaba

Futaba

På lager: 4

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Futaba S-U400 - Standard-Sized High Voltage Servo with Plastic Gears

Features:

Plastic Gears
High Voltage
S.BUS2
Will replace: S3010, S3152 & S3072HV

Specs:

Rated Voltage: 6-7.4V
Operating Voltage: 4.8-8.4V
Power @ 6.6V: 7.1kg/cm
Speed @ 6.6V: 0.14s/60°
Power @ 7.4V: 7.9kg/cm
Speed @ 7.4V: 0.13s/60°
Size: 40 x 20 x 36.1 mm
Weight: 39g

Length:	40 mm
Height:	38,1 mm
Width:	20 mm
Weight:	40 g
Max Voltage:	7,4 V
Speed at 7,2/7,4V:	0,13 sec/60°
Torque at 7,2/7,4V:	7,9 kg/cm
Features:	HV, S.Bus2

Produsent

Futaba

Futaba

Relaterte produkter

Hovedbilde Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2

Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2

Art.nr: BULK U300B

Copied

NB! Dette er et helt nytt produkt, men den kommer uten embalasje. Futaba S-U300 Universal Standard Servo This is a new Futaba standard servo with S.BUS(2) function Specs: Plastic Gears Digital / S.BUS2 Input Voltage: 4.8-6V Torque @ 4.8V: 3.5kg/cm Torque @ 6.0V: 4.5kg/cm Speed @ 4.8V: 0.23s/60° Speed @ 6.0V: 0.19s/60° Size: 40.4 x 19.8 x 36.0 mm Weight: 36g

219,-

269,-

-19%

Hovedbilde Futaba S-U305 Servo Standard 8.9kg/0.20s HV S.BUS2 ...

Futaba S-U305 Servo Standard 8.9kg/0.20s HV S.BUS2 ...

Art.nr: S-U305

Copied

Futaba S-U305 Std Servo 8.9kg & 0.20s S3305 based design, Digital Servo without S.BUS connection. Specs: LOW Voltage (6V) operation Torque @ 6V: 8.9Kg/cm Speed @ 6V: 0.20sec/60° Size:40.0 x 20.0 x 38.1mm

449,-

479,-

-6%

Kunder kjøpte også

Hovedbilde Tamiya 53937 LED LIGHT CONTROL UNIT TLU-02

Tamiya 53937 LED LIGHT CONTROL UNIT TLU-02

The Tamiya LED Light Control Unit TLU-02 enables various light effects when used with separately available Tamiya LED lights and LED Light Unit (TLU-01). The unit enhances overall appearance and realism of your electric radio control touring car. A total of 16 sets (32 lights) of LED Lights can be lit up by connecting two TLU-01 units. Set-up is similar to an ESC and is simple to understand even for beginners. • Requires transmitter, battery, TLU-01 unit and LED lights (not included). • Select headlights, position and fog lights to reproduce realistic evening and night driving. • Brake, backup lights and blinkers can be activated according to transmitter operation. • Hazard lights flash after car stops. • Realistic passing lights. • Lights flash during acceleration. • Siren-like LED Lights. • Unidirectional flashing of 8 LED Lights. • Back and forth flashing of 8 LED Lights. Den brukes til å gjøre LED-lysene på RC-bilen mer realistiske og koble dem til funksjonene på fjernkontrollen. Hva kan den styre? 💡 Hovedlys og parklys 🔴 Bremselys ⚪ Ryggelys 🟠 Blinklys 🚨 Nødblink 🔦 «Passing»-lys/blink med fjernkontrollen ✨ Blinkende/flimrende lys 🚓 Sirene-/utrykningslys 🔄 Løpelys/sekvensielle LED-effekter Den kan styre opptil 32 LED-er dersom du kobler til to TLU-01-enheter. Viktig: TLU-02 er ikke komplett alene. Den er laget for å brukes sammen med Tamiya TLU-01 LED Light Unit (53909) og LED-lys

749,-

949,-

-21%

Hovedbilde Tamiya 87035 Masking Tape Refill 18mm

Tamiya 87035 Masking Tape Refill 18mm

This is an 18 Meter Roll of 18mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model applications. Flexible. Easily applied to curved surfaces making it ideal for masking off areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS: Length: 18m Width: 18mm

49,-

Hovedbilde Tamiya 81718 Acrylic Mini XF-18 Medium Blue 1/3 oz

Tamiya 81718 Acrylic Mini XF-18 Medium Blue 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Medium Blue paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-

Hovedbilde Tamiya 87034 Masking Tape Refill 10mm

Tamiya 87034 Masking Tape Refill 10mm

This is a 10 Meter Roll of 10mm Tamiya Masking Tape Refill. FEATURES: This is a thin, self-adhesive paper tape, developed for model applications. Flexible. Easily applied to curved surfaces making it ideal for masking off areas for painting, etc. INCLUDES: One Roll Of Masking Tape SPECS: Length: 10m Width: 10mm

49,-

Hovedbilde Tamiya 81763 Acrylic Mini XF-63 German Gray 10ml

Hovedbilde Tamiya 81763 Acrylic Mini XF-63 German Gray 10ml

Tamiya 81763 Acrylic Mini XF-63 German Gray 10ml

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic German (Dark) Grey paint. REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-

Hovedbilde Tamiya 87037 Cyano-Acrylate Cement (Super Glue)

Tamiya 87037 Cyano-Acrylate Cement (Super Glue)

Tamiya Cyano-Acrylate Cement (Super Glue)

79,-

Hovedbilde Revell 39604 Contacta Pro Modelling Glue 25gm

Revell 39604 Contacta Pro Modelling Glue 25gm

Revell flytende lim 25gr Lim beregnet for plastbyggesett. Brukes til alle typer av polystyrene plast..Påfør et tynt lag på begge flater og press sammen. Limet fungerer ved å løse opp og smelte sammende to flatene. Påfør ikke for mye lim. Tørker på noen minutter Plastflaske med tynn spiss for påføring. NB! Krever god ventilasjon nå man bruker dette limet. Revell Contacta Professional' is for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine glueing of tiny details and clear part edges.

59,-

69,-

-14%

Hovedbilde Tamiya 54599 LED Light 3 Halogen White

Tamiya 54599 LED Light 3 Halogen White

Description: This 3mm Halogen White LED light recreates a halogen shade reminiscent of that on classic autos, and the two sizes can be employed to depict headlights, fog lamps, position lights, reverse lamps and so on. Feature: Use with Item 53909 Material: Plastic Color: White Package contains 2 high-brightness LEDs which can be effortlessly connected to the Tamiya TLU-01 Light Control Unit NOTE: Not compatible with Multi-Function Control Units Items 53957, 56511 and 56523 Include: Tamiya LED Light φ3 Halogen White (1 set)

139,-

Hovedbilde Tamiya 54008 LED Light 3mm Dia. White

Tamiya 54008 LED Light 3mm Dia. White

These are the 3mm LED White Lights for use with the Tamiya TLU-01 LED Light Unit. FEATURES Can be installed on many R/C cars, boats, helicopters and airplanes for added realism INCLUDES Two Tamiya 3mm LED White Lights with white 2-pin connector REQUIREMENTS Connecting to TLU-01 LED Light Unit SPECIFICATIONS Wire Lead Length: 16" (406mm) Diameter: 0.12" (3mm) COMMENTS Not for use with the 1/14 scale electric R/C Tractor Truck Series

119,-

Hovedbilde Tamiya 54009 LED Light 3mm Dia. Red

Tamiya 54009 LED Light 3mm Dia. Red

Designed for use with the TLU-01 Light Unit, this is the 3mm Diameter Red LED Light Set from Tamiya. FEATURES 16" long lead with two 3mm diameter Red LED Lights on the end Factory installed connector designed to fit the TLU-01 Light Unit Allows modelers to dress up almost any model body INCLUDES One LED Light Set with Two 3mm Diameter Red LEDs One Adhesive Backed Wire Clip REQUIREMENTS A Tamiya TLU-01 Light Unit and installation SPECIFICATIONS Length: 16" (405mm) Diameter: .20" (5mm) COMMENTS Will not work with the Tamiya 1/14 Scale Tractor Truck Models

119,-

Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium

Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium

Traxxas 6468 Tire Glue TRX Ultra Premium

Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond). To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features: The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr

139,-

159,-

-13%

Hovedbilde Tamiya 81511 Acrylic Mini X-11 Chrome Silver 1/3 oz

Tamiya 81511 Acrylic Mini X-11 Chrome Silver 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Chrome Silver paint REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint. For Adult Modelers Only.

30,-

Hovedbilde Tamiya 54317 Sensor Cable 120mm

Tamiya 54317 Sensor Cable 120mm

Tamiya Sensor Cable 120mm 54317 The Tamiya Brushless ESC 01 (Sensored Type) includes a sensor cable to connect to the TBLM-01S series of Tamiya Brushless Motors (Sensored). This cable is now available as a separate item. In addition to the 12cm long cable, a 16cm long version is also available to allow you to choose the one which best matches the R/C unit position on your car.

65,-

Hovedbilde Tamiya 74124 Craft Scissors For Plastic/Soft Metal

Tamiya 74124 Craft Scissors For Plastic/Soft Metal

Tamiya 74124 Craft Scissors For Plastic/Soft Metal These versatile scissors are a must-have addition to every modelers' tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other materials/thicknesses above and beyond the capabilities of standard scissors. • Length: 170mm; blade length: 40mm. • Blade material: anti-rust treated stainless steel. • Features a stylish navy blue grip. Suitable material thicknesses that may be cut: Note: materials and thicknesses are intended as a guideline only. • Tamiya Pla-plate: up to 1.2mm • Tamiya Clear Pla-plate: up to 0.5mm • Polycarbonate: up to 1.0mm • Other plastics: up to 1.0mm • Aluminum: up to 0.5mm • Copper/Brass/Nickel: up to 0.3mm • Leather: up to 2.0mm • Paper: up to 2.0mm • Cardboard/Rubber sheeting: up to 5.0mm

299,-

329,-

-9%

Hovedbilde DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...

Hovedbilde DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...

DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...

Red & Black Shrink Tube Set - D5mm/W7.5mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 5mm Width (laid flat): 7.5mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

29,-

Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...

Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...

Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...

Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 4100KV Motor Combo - 2-3S LiPo ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efﬁciency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC. Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

-11%

Hovedbilde Tamiya 74123 SP SIDE CUTTER (SLIM JAW)

Hovedbilde Tamiya 74123 SP SIDE CUTTER (SLIM JAW)

Tamiya 74123 SP SIDE CUTTER (SLIM JAW)

Tamiya 74123 ★This tool is designed to remove plastic model parts from their sprues. ★The sharp jaw blades offer an excellent cutting edge, with their even slimmer form enabling easier removal of smaller parts with less clearance. ★Features a comfortable black non-slip grip. ★Length: 115mm.

469,-

499,-

-6%

Hovedbilde Tamiya 54318 TBLE-01S SENSOR CABLE (16CM)

Hovedbilde Tamiya 54318 TBLE-01S SENSOR CABLE (16CM)

Tamiya 54318 TBLE-01S SENSOR CABLE (16CM)

Sensor kabel fra Tamiya på 16cm. The Tamiya Brushless ESC 01 (Sensored Type) includes a sensor cable to connect to the TBLM-01S series of Tamiya Brushless Motors (Sensored). This cable is now available as a separate item. In addition to the 15cm long cable, a 12cm long version is also available to allow you to choose the one which best matches the R/C unit position on your car.

65,-

Hovedbilde HPI Racing 17541 Porsche 911 GT3 RS Body (200mm)

Hovedbilde HPI Racing 17541 Porsche 911 GT3 RS Body (200mm)

HPI Racing 17541 Porsche 911 GT3 RS Body (200mm)

1/10Touring Car Size 200mm/Use offset wheels for 190mm width chassis The Porsche 911 GT3 RS is a super-sporty 200mm wide body that will fit any wide (200mm width) 1/10 scale touring cars and features the usual HPI attention to detail. The Porsche 911 GT3 RS is the track-oriented supercar with the classic 911 profile. The realistic styling includes front light buckets, a large molded nylon rear wing for high downforce, and decals that allow you to replicate the real car. Like all HPI bodies, the Porsche 911 GT3 RS is molded from crystal-clear, impact-resistant polycarbonate plastic and comes with a clear protective overspray film, vinyl window masking and a large decal sheet. Made of flexible vinyl to fit every curve on the body, the decal sheet includes official Porsche decals, headlights, tail lights, and door handles, plus official Porsche and HPI Racing logos! The body also has drill locations marked for HPI sedan cars, making it easy to line up the body mount and antenna holes. Photorealistic die-cut premium vinyl decals include window frames, headlight, tail lights and more, plus official logos! Headlight buckets Molded nylon 3-D rear wing Overspray film and pre-cut vinyl window masks make painting fast and simple A decal instruction sheet is included for decal placement The body has dimple marks for body post drill locations Molded from clear polycarbonate plastic for durability and long life ©2025 Porsche AG, Porsche Crest, Porsche logotype, 911, GT3 and RS and the distinctive design of Porsche cars are trademarks of Porsche AG under license.

549,-

599,-

-8%

Hovedbilde HPI 101320 1973 Porsche Carrera RSR Body (No ...

Hovedbilde HPI 101320 1973 Porsche Carrera RSR Body (No ...

HPI 101320 1973 Porsche Carrera RSR Body (No ...

HPI 101320 1973 Porsche Carrera RSR Body (WB210mm.F0/R6mm No Accessories) HPI is proud to reintroduce one of the legends of classic motorsports history: the 1973 Porsche 911 Carrera RSR! Incredible attention to detail and scale realism makes the HPI Porsche 911 Carrera RSR body a true replica of the car that defined sports car racing for a generation of fans. This bodyshell includes both large decal sheets (window lines, lights, Martini livery, etc.) and complete window masks, while the #85527 or #85529 Body Accessories Set ( Chrome or Black) is not included. This can be ordered separately. The 1973 Porsche 911 Carrera RSR body comes with vinyl window masks, a complete set of pre-cut vinyl decals and headlight buckets for an incredibly realistic look. Add your own choice of paint colour and you're ready to take on the racing grid with this legendary vintage race car. The Porsche name was built on agility and power: with a small frame, low weight and powerful engine, Porsche cars such as the 356, 550 and 911 were very popular with racers and sports car fans around the world. In 1972, after a rules change in the World Sportscar Championship, Porsche unleashed the ultra-lightweight 911 Carrera RS 2.7 for the road, as well as the RSR racing version in the Group 4 GT class. This model was based on the 911 S, which had won the Monte Carlo Rally and was designed to take on cars with engines twice as strong. For the 1973 racing season, the engine increased in size to 2.8 litres, and the screaming flat-six 'boxer' engine pushed out 300hp at 8,000 RPM, proving to be the ideal match for the nimble 911 chassis. The potent combination of a lightweight chassis fitted with a powerful engine proved to be unbeatable in the hands of the right drivers, and the production-based Carrera RSR 2.8 won several of the highest-profile races of the mid-1970's ahead of prototype cars from Ferrari, Ford and Maserati, including its race debut at the Daytona 24hrs as well as the Sebring 12hrs and the iconic Targa Florio - sealing its place in motorsport history. Like all HPI bodies, the 1973 Porsche 911 Carrera RSR comes with a clear protective overspray film, window masks and a large decal sheet. Made of flexible vinyl to fit every curve on the body, the decal sheet includes official Porsche, Carrera & Martiini decals, headlights, tail lights, and door handles, plus official HPI Racing logos! The body also has drill locations marked for HPI Cup Racer cars, making it easy to line up the body mount and antenna holes. Premium vinyl decals include window frames, headlights, grille, tail lights, official logos and more - For a perfect finish with a lot of details High quality polycarbonate with excellent dimensional stability and impact resistance - For extra strength and longer life The body has dimple marks for body post drill locations Fits the HPI Cup Racer and other "Mini" size cars Note: This bodyshell set does not include the body accessories set. To fully replicate the street version of the Carrera RSR, use two sets of #85527 Body Accessories Set (Chrome) to add the double rear exhaust. The Martini racing version replica uses a single #85529 Body Accessories Set (Black) - note the position of the race car's wipers for authentic looks; the wipers on the street version are reversed. ©2025 Porsche AG, Porsche Crest, Porsche logotype, 911, Carrera and RSR and the distinctive design of Porsche cars are trademarks of Porsche AG under license.

549,-

599,-

-8%

Hovedbilde Tamiya 47524 Porsche 934 (1976) 50th Anniversary - Kit

Hovedbilde Tamiya 47524 Porsche 934 (1976) 50th Anniversary - Kit

Tamiya 47524 Porsche 934 (1976) 50th Anniversary - Kit

Forhåndssalg! Produktinformasjon: 50th Anniversary Limited Edition 1/10 skala Flotte detaljer Kit Ventes inn tidlig i mai. Forhåndsbestillinger sendes straks vi har varen på lager. Levering med forbehold pga begrenset produksjon. Tamiya Porsche 934 50th anniversary er et nydelig limited edition byggesett med fantastiske detaljer. Kitet leveres med en unik nummerert plate, motor montert som på orginalen, magnetiske karosserifester, karbonforsterkninger i bærearmer og flere lekre detaljer. Bilen kommer i 1/10 skala og har naturligvis 4-hjuls uavhengig fjæring. Leveres uten elektronikk og utstyr, se anbefalt tilbehør.

5.695,-

5.995,-

-5%

Hovedbilde Tamiya 81501 Acrylic Mini X-1 Black 1/3 oz

Tamiya 81501 Acrylic Mini X-1 Black 1/3 oz

This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe. Can be used on most common model plastics such as styrol resin, styrofoam and wood. Excellent for either brush or spray painting. Covers well, flows smoothly with no blushing or fading, and can be blended easily. Jar will accept standard airbrush lid. Can be washed away with plain water if done prior to curing. Available in 19 glossy, 45 flat and 7 translucent colors plus an exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Black REQUIRES: Paint Brush or Airbrush to apply to model. Eye, Lung and Skin protection. Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children. Highly Flammable Paint.

30,-

Hovedbilde Tamiya 53912 LED Light Orange (2)

Tamiya 53912 LED Light Orange (2)

This is a pair of LED Orange Lights for use with the Tamiya TLU-01 LED Light Unit FEATURES: Can be installed on many R/C cars, boats, helicopters and airplanes for added realism INCLUDES: Two Tamiya LED Orange Lights with white 2-pin connector REQUIRES: Connecting to TLU-01 LED Light Unit SPECS: Wire Lead Length: 16" Diameter: 0.12" (3mm) COMMENTS: Not for use with the 1/14 scale Tamiya electric R/C Big Truck Series.

139,-

Hovedbilde Tamiya 85004 Spray Lacquer TS-4 German Gray 3 oz

Tamiya 85004 Spray Lacquer TS-4 German Gray 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer German Grey Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-

Hovedbilde Tamiya 85006 Spray Lacquer TS-6 Matte Black 3 oz

Tamiya 85006 Spray Lacquer TS-6 Matte Black 3 oz

This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time. Extremely useful for painting large surfaces. 100ml is enough to fully cover two or three 1/24 scale sized car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. Therefore, following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints. By combining three different paints, the decoration of plastic models will become simpler and more effective. Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Matt Black Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container. Keep out of the reach of children.

109,-