Hopp til innhold
-17%

Absima 2440015 Green Small Body Clips (10)

Art.nr: 2440015

49,-

59,-

- 17%
Absima

Absima

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Absima 2440015 Green Small Body Clips (10)

Produsent

Kunder kjøpte også

This is the 6x52mm Drive Shaft for the HPI Savage XS Flux Mini Monster Truck. FEATURES: Steel construction INCLUDES: 6x52mm Drive Shaft         (11)

79,-

KJØP
This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles  

139,-

KJØP
THIS PART FITS THE FOLLOWING KITS / PARTS: Vorza Flux Savage X 4.6 Baja 5SC Bullet ST 3.0 Bullet MT 3.0 Bullet ST Flux Bullet MT Flux Baja 5b SS Kit Savage XL Flux Baja 5b D-Box 2 Baja 5B Sidewinder X5 Baja 5B TSk-b Class 1 SAVAGE XS FLUX VGJR VENTURE TOYOTA FJ CRUISER GREY VENTURE TOYOTA FJ CRUISER... VENTURE Scale Builder Kit VENTURE TOYOTA FJ CRUISER MATTE... WR8 FLUX KEN BLOCK GYMKHANA FORD... WR8 3.0 KEN BLOCK GYMKHANA FORD...STD JUMPSHOT MT V2.0 JUMPSHOT SC V2.0 JUMPSHOT ST V2.0 Savage XS Flux Chevrolet El Camino...

45,-

KJØP
HPI Racing Slipper Hub Set Savage XS

69,-

KJØP
Steel Bearing Set (20pcs) For Tamiya M07 Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Features: For : Tamiya M07 Material : Steel Shielding: Metal   Includes: Total Bearing (20 pcs) -YB6006  (3x7x3mm) (2 pcs) -YB6009  (4x8x3mm) (1 pc) -YB6011  (5x8x2.5mm) (5 pcs) -YB6013  (5x10x4mm) (8 pcs) -YB6014  (5x11x4mm) (2 pcs) -YB6023  (10x15x4mm) (2 pcs)

119,-

129,-

KJØP
-8%
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Tires, Anaconda 2.2" (rear) (2)/ foam inserts (Bandit) (soft compound) Anaconda 2.2" performance street tires provide exceptional wear and sticky traction for high-speed asphalt action. Fits Traxxas and other standard 2.2" buggy wheels.

199,-

219,-

KJØP
-9%
Tires & wheels, assembled (Tracer 2.2" black chrome wheels, Alias 2.2" tires) (2) (Bandit rear, medium compound with foam inserts) (TSM rated)

319,-

349,-

KJØP
-9%
WLToys 144001.1252.001 Wheel Frame (Rear)

29,-

39,-

KJØP
-26%
Wheel Frame (Front)   Produktet er forbundet med: Reservedeler WLToys Biler WLToys Buggy 124017 Fierce 1/12 4WD Børsteløs V2 WLtoys Buggy 124019 Fierce 1/12 4WD - Komplett WLToys Truck 124016 1/12 4WD Børsteløs V2 WLtoys Truck Offroad Habile 1/12 4WD - Komplett

39,-

45,-

KJØP
-13%
This is the "C" Parts for the Tamiya Lunchbox Kit.  This bag contains the chrome parts used to accent the body.     FEATURES Chrome finish  Plastic construction   INCLUDES One front bumper/grille, rear bumper, shock bodies, running boards/  side pipes and body post

149,-

159,-

KJØP
-6%
Rimelig og bra nimh batteri pakke til Tamiyabiler. Rounded stick pack style packaging for universal fit in many electric-powered kits. Spec: 7,2 Volt 2000mAh Tamiya Type Plug

179,-

199,-

KJØP
-10%
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
This is a pair of Rear Treaded Tires for the Tamiya Grasshopper. FEATURES: Rubber, all-terrain treaded tires INCLUDES: One pair of Rear Tires for the Tamiya Grasshopper REQUIRES: Tire glue. SPECS:    Width: 1.5" (38mm)           Outside Diameter: 3.1" (79mm)           Inside Diameter: 1.5" (38mm) COMMENTS: If front tires are needed, order 9805033

109,-

KJØP
This is the CVA short shock set for Tamiya cars.   This package has enough parts to build TWO shocks.    Includes: Y-parts (plastic parts for the shocks)     metal parts bag     four springs (2.5" or 63mm) long     A one-ounce bottle of shock oil (medium)     Instruction sheet Features: Steel piston shafts and springs, tough nylon bodies. Requires: Assembly and installation into a kit. Comments: The CVA refers to the materials these are constructed of--CVA is a     plastic shock as opposed to the large-bore aluminum shocks.     ALSO--the metal parts bag does include the o-rings and diaphragms,     the shock shafts     Includes: Coil Springs (Soft) Damper Oil Coil Springs (Stiff) Metal Parts Bag X Parts Y Parts   Damper length: 94mm for cars (Madcap(rear),Manta Ray (rear),Bear Hawk (rear),Top-Force (rear),Bush Devil (front & rear),Standium Biltzer (rear),Super Blackfoot (front & rear),Terra Conqueror (rear),Biltzer Beetle (rear),Dyna Blaster (rear),Super Hornet (rear) Damper length: 87mm for cars (Manta Ray (front),Top-Force (front),Terra Conqueror (front), Dyna Blaster (front) Damper length: 87mm for cars (GrasshopperII (rear),Avante 2001(rear) Damper length: 80mm for cars (Monster Beetle (front & rear),Lunch Box (front & rear),Midnight Pumpkin (front & rear)

249,-

KJØP
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

29,-

KJØP
SAVAGE XS/48 PITCH/SINTERED METAL Genuine HPI quality spare part for easy maintenance and repairs. This Part Fits the following kits / parts: Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT Savage XS Flux VGJR

79,-

KJØP
This is the Slipper Clutch Plate and Pad Set for Savage XS Flux Vehicle. FEATURES Steel plates Composite fiber pads INCLUDES Two each Slipper Clutch Plates and Pads

89,-

KJØP
Ladekabel Bananstikk Traxxas

89,-

99,-

Ikke på lager
-10%
These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Fastens to front or rear bulkheads INCLUDES Two Front or Rear Suspension Arms

69,-

KJØP
  This is the set of Traxxas Long GTR Shock Springs                     with 0.623 Orange Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.623 Orange Rate GTR Shock Springs SPECS:    Length: 2.04" (52mm)           Wire Diameter: 0.043" (1.1mm)

59,-

KJØP
Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

449,-

KJØP
-4%
  High-quality HUDY Bearing Oil is used to lubricate bearings for ultra-smooth operation and long lifespan. Very good for use on dusty tracks and carpet tracks because it helps combat the effects of dust and carpet hair contamination. Super thin to help promote quick penetration and fast & easy coverage. Recommended for use immediately after bearing cleaning (e.g. with spray cleaner).       (11)

99,-

Ikke på lager
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction           Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS:    Inner Diameter: 10mm           Outer Diameter: 15mm           Side Thickness:  4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed).   Tamiya  630    3X6X2.5mm Tamiya  730    3X7X3mm Tamiya  840    4X8X3mm Tamiya  850    5X8X2.5mm Tamiya 1050    5X10X4mm Tamiya 1060    6X10X3mm Tamiya 1150    5X11X4mm Tamiya 1260    6X12X4mm Tamiya 1280    8X12X3.5mm Tamiya 1480    8x14x4mm ??? Tamiya 1510    10X15X4mm Tamiya 1680    8X16X5mm

89,-

99,-

KJØP
-10%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png