Hopp til innhold

Nye produkter

Art.nr: 38020501
Copied
Hobbywing XeRun XR8 Plus G2S ESC & 4268SD G3 2200KV Off-Road Combo ESC Features: Durable Frame-less Fan Built-in 5 common profiles, suitable for all 1/8 Racing, select and use instantly. (e.g. Zero timing-Blinky mode, 1/8 Off-Road Racing, 1/8 On-Road Racing, 1/8 GT Racing, 1/8 Sport mode). There are 30 built-in adjustable parameters to set various power requirements. The parameters can be imported and exported, which is convenient for drivers to communicate with and learn from each other. Supports the firmware upgrade of the ESC (The multi-function LCD programming box or OTA Programmer is needed to purchase). You can enjoy the latest functions. Supports 48 degrees Boost and Turbo timing. When matching with XERUN 4268/4274 G3 motor, the Max. Speed can be promoted by 50%, easily win your rival. Multiple function: Low voltage protection, thermal protection of the ESC, motor and capacitor. Built-in switch mode BEC with a maximum output of 15A and voltage adjustable from 6V to 8.4V (step: 0.1V) for usage with servos & other devices require different voltages. The built-in reverse connection protection circuit of the ESC avoid the damage to the ESC due to reverse connection. The record function of real-time data: Open this function by connecting the ESC with HW Link (OTA Programmer is needed to purchase) and mobile App can check throttle quantity, Voltage, Current, Temperature, RPM and other data in real time, and obtain the running status of the ESC and motor. The record function of off-line data: It can not only read out the extreme value data such as the maximum temperature of the esc and motor,maximum RPM of the motor through the LCD program box or HW link app (OTA Programmer is needed to purchase), but also view the historical running data (graph) in the data record in HW link app (OTA Programmer is needed to purchase ESC Specs: Cont./Peak Current: 200A / 1080A Motor Type: Sensored / Sensorless Brushless Motors Applications: 1/8 On-Road/Off-Road/Truggy Racing LiPo Cells: 2-6S LiPo BEC Output: 6-8.4V Adjustable, Continuous/Peak Current: 6A/15A (Switch-mode) Cooling Fan: Powered by the stable BEC voltage of 6-8.4V Size: 56.1(L) x 42.1(W) x 38.5(H)mm Weight: 122g (W/O Wires) Connectors: No Programming Method: Multifunction LCD Program Box, OTA Programmer Motor Specs: Application: 1/8 Off-Road Type: Sensored Brushless Poles: 4 KV Rating: 2200 LiPo Cells: 2-6S No Load: 4.1A Case Diameter: 42mm Case Length: 67.8mm Shaft Diameter: 5mm Shaft Length: 18.5mm Weight: 285g Front Bearing: 5x5x16mm Rear Bearing: 5x5x11mm Timing: 20-40° (adjustable)

4.595,-

4.795,-

KJØP
-4%
Art.nr: YB6027M/S10
Copied
RC Ball Bearing (12x21x5mm) 10 pcs RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specificationa: Yeah Racing (#YB6027MS/10) Ball Bearing (12x21x5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

119,-

129,-

KJØP
-8%
Art.nr: 500907653
Copied
Article number: 500907653 Product: 1:16 RC Tractor JCB 2.4 G 100 % RTR Yellow RC farm machine! The RC tractor with a licence from the British manufacturer JCB scores with extensive equipment and numerous functions that are controlled via the 2.4 GHz transmitter. In addition to LED headlights and a horn, the 1:16 scale tractor also has a sound module for realistic driving noises. The tractor demonstrates all functions via the demo function. Apart from the extremely easy handling, the yellow tractor impresses with its enormous driving performance: The efficient NiMH battery ensures an extra-long driving time of 40 minutes. If the tractor alone is not enough for you, you should take a closer look at our JCB tractor with trailer (500907654). Buy – Charge – Action! Included: Fully assembled model, 2.4GHz remote control unit, NiMH drive battery 4.8V / 400 mAh, USB charger, 2 x AA transmitter batteries, instruction manual. WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.

1.395,-

1.595,-

KJØP
-13%
Art.nr: TRX 9234
Copied
Traxxas 9234 Body mounts, front & rear (fits #9230 body) Front and rear clipless body mounts for 9230-series TRX-4® Ford® F-150® bodies Replacement part for these models: TRX-4® Ford® F-150® High Trail Edition™

129,-

139,-

KJØP
-7%
Art.nr: TRX 7898
Copied
Traxxas 7898 Body, XRT™, Solar Flare (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

1.295,-

1.395,-

KJØP
-7%
Art.nr: TRX 6444
Copied
Traxxas 6444 Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Art.nr: TRX 6443
Copied
Traxxas 6443 Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Art.nr: TRX 6442
Copied
Traxxas 6442 Spur gear, 46-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 46-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Art.nr: 2018
Copied
This is the Robinson Racing Hardened 18 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steel May be used on motors with a 5mm shaft including Traxxas, Associated and HPI models INCLUDES: 18 Tooth 48 Pitch Pinion Gear with 4mm Set Screw REQUIRES: 2mm hex wrench SPECS:    Number of Teeth: 18 Pitch: 48 Hole Diameter: 5mm

189,-

KJØP
Art.nr: 2043
Copied
This is the Robinson Racing Hardened 43 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steel May be used on motors with a 5mm shaft including Traxxas, Associated and HPI models INCLUDES: 43 Tooth 48 Pitch Pinion Gear with 4mm Set Screw REQUIRES: 2mm hex wrench SPECS:    Number of Teeth: 43 Pitch: 48 Hole Diameter: 5mm

189,-

KJØP
Viser 3871 til 3880 (av 14968 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png