Hopp til innhold
Hjem / Nye produkter

Nye produkter

Hovedbilde WlToys A800-0011 Motor
WlToys A800-0011 Motor
Art.nr: A800-0011
Copied
WlToys A800-0011 Motor

89,-

KJØP
Hovedbilde WLToys 184016 Buggy Mad Max TREME 1/18 4WD Børsteløs Hovedbilde WLToys 184016 Buggy Mad Max TREME 1/18 4WD Børsteløs
WLToys 184016 Buggy Mad Max TREME 1/18 4WD Børsteløs
Art.nr: WL184016
Copied
Børsteløst oppsett Komplett 70km/t!+ Mad Max holder det den lover i navnet, dette er galskap på 4 hjul! Liten børsteløs buggy med 4-hjulstrekk som går som ett uvær. Leveres komplett med sender, oppladbart batteri og lader. Ferdig montert og med kult candy-dekor på karosseriet. Nevnte vi at den er helt tullerusk å kjøre?     1/18-skala Mad Max TREME er 1/18 skala så den er 26cm lang og helt vill! Leveres ferdig montert med børsteløs 2845-motor som gir bilen en toppfart på 70km/h+ på 2s LiPo. Bilen er utrustet med fullt justerbart understell, metall dempere, metall i hele drivverket og kraftig metall bunnpanne. Karosseri er i candy dekor med TREME printet inn på siden og på vingen, denne bilen er eXtreme! Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Denne versjonen har også kjølevifte til ESC og kjøleribbe til motor påmontert. Batteri Bilen leveres med ett 2S 1500mAh LiPo-batteri med Deans-type kontakt. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AA-batterier, dette må kjøpes i tillegg. Lader er av USB-typen og kan lade batteriet på ca. 2 timer. Ønsker man lader som kan brukes rett i støpsel eller på 12V, lader raskere og har kontroll på ladetid, spenning med mer så ligger det alternativ lader som tilbehør. Husk da også å kjøpe med deans-ladekabel for de som trenger det. Spesifikasjoner Lengde 263mm Bredde 180mm Høyde 108mm Motor 2845 Sender/Radio Inkludert 2.4GHz Batteri 2s 1500mAh Lipo m/Deans Kjøretid 7-10min Ladetid Ca. 2t Rekkevidde 100m+ Skala 1/18   Eskens innhold 1x RC Buggy 1x Radio 2.4GHz 1x Batteri 1x Lader 1x Manual 1x Small cross sleeve

1.699,-

1.799,-

KJØP
-6%
Hovedbilde Hobbywing 38020500 XeRun XR8+ G2 & 4268 1900KV G3 ... Hovedbilde Hobbywing 38020500 XeRun XR8+ G2 & 4268 1900KV G3 ...
Hobbywing 38020500 XeRun XR8+ G2 & 4268 1900KV G3 ...
Art.nr: 38020500
Copied
Produktinformasjon 2-6S 1/8 skala Børsteløs combo til 1/8 skala sammensatt av XeRun XR8 Plus G2S ESC & 4268 1900KV G3 motor. ESC Hobbywing XeRun XR8 Plus G2S, ypperlig børsteløs regulator til 1/8 skala, ofte brukt i konkurransesammenheng. Kompatibel med 2-6s LiPo, leveres med løse og myke 11AWG kabler klare til å loddes men uten kontakter. Sensorkabel og krympeplast følger også med.   Størrelse 56,1 x 42,1 x 38,5mm Vekt 122g uten ledninger men inkl bryter Vifte 30x30x10mm Motor Sensorbasert børsteløs motor. Passer til bl.a. 1/8 skala konkurranse bruk.   Akseldiameter 5mm Diameter 42mm Lengde 68mm Vekt 315g KV 1900   Product details in english Hobbywing Xerun XR8 Plus G2S Brushless ESC/4268SD G3 Motor Combo. The Hobbywing Xerun XR8 Plus G2S 1/8 Competition Sensored Brushless ESC is the next level in 1/8 competition ESCs. Advancements have been made allowing this ESC to support 48° of boost and turbo timing. Pair this ESC with the included 4268SD G3 motor for extreme performance.    

4.295,-

4.595,-

KJØP
-7%
Hovedbilde MST-841011 Sensor Cable 300mm
MST-841011 Sensor Cable 300mm
Art.nr: MST-841011
Copied
Sensor cable 300mm

79,-

89,-

KJØP
-11%
Hovedbilde Absima Tool Set 6 Pcs 1.5/2.0/2.5/3.0 mm +Flat + ...
Absima Tool Set 6 Pcs 1.5/2.0/2.5/3.0 mm +Flat + ...
Art.nr: 3000045
Copied
Features: √ 6 different types of tools for every professional model builder √ Made of the finest materials √ High grade steel √ Handle made of synthetic material in a comfortable size √ Colored end caps for easy identification Specification:   ● 1 pcs. 1.5mm allen wrench ● 1 pcs. 2.0mm allen wrench ● 1 pcs. 2.5mm allen wrench ● 1 pcs. 5.5mm nut socket driver ● 1 pcs. 7.0mm nut socket driver ● 1 pcs. 5.0mm phillips screw driver Length: ● Allen wrench:  197mm ● Nut socket driver: 197mm ● Phillips screw driver: 190mm Ø Handle: 30mm

479,-

499,-

KJØP
-4%
Hovedbilde Kyosho Fazer MK2 (L) Pontiac GTO 1967 Tyrol Blue 1:10 ... Hovedbilde Kyosho Fazer MK2 (L) Pontiac GTO 1967 Tyrol Blue 1:10 ...
Kyosho Fazer MK2 (L) Pontiac GTO 1967 Tyrol Blue 1:10 ...
Art.nr: 34431T2B
Copied
KYOSHO FAZER MK2 (L) PONTIAC GTO 1967 TYROL BLUE 1:10 READYSET Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition to the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.   Chassis features a reduced number and variety of screws by making frequently used screws the same size. Most screws are flat head screws that can be removed with a 2mm hex wrench for easy disassembly.“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. New design shaft drive full-time 4WD touring chassis (FZ02L) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Equipped with 2-bevel grease-filled gear diffs on front and rear. Large size dog bones and cup joints realize superior reliability and durability. Belt mounting battery compartment allows various battery types to be used. Full ball bearings that reduce drive loss equipped throughout the drive system. Features KS202W steering servo. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Performance can be further enhanced by installing various optional parts. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Handling factors such as bump steer and scrub radius are optimized on the front suspension. Simple ball-connected steering knuckles provide reliable steering and suspension movement. Interchangeable front-rear and left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. New design Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style.  Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T-37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.  Kit Contents Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Required For Operation 4 x AA batteries for transmitter Battery and charger for chassis Tools Chassis Technical Data Length                         500mm Width                          195mm (Body 210mm) Wheelbase                 274mm Tread (F/R)                  F:167mm / R:167mm Tires (F/R)                   F:64 X 27.7mm / R:64 X 27.7mm Gear Ratio                   6.54:1 Weight                         1650g (approx.) R/C system                 Syncro KT-231P+ Motor                            550 G14L

4.295,-

4.595,-

KJØP
-7%
Hovedbilde Traxxas 9759 Shock Springs GTM (rate 0.123) (2) TRX-4M
Traxxas 9759 Shock Springs GTM (rate 0.123) (2) TRX-4M
Art.nr: TRX 9759
Copied
Traxxas 9759 Spring, shock (GTM) (0.123 rate) (1 pair) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.131 rate) (1 pair) Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 9758 Shock Springs GTM (rate 0.095) (2) TRX-4M
Traxxas 9758 Shock Springs GTM (rate 0.095) (2) TRX-4M
Art.nr: TRX 9758
Copied
Traxxas 9758 Spring, shock (GTM) (0.095 rate) (1 pair) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.102 rate) (1 pair) Replacement part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 9760 Shock Springs GTM (rate 0.155) (2) TRX-4M
Traxxas 9760 Shock Springs GTM (rate 0.155) (2) TRX-4M
Art.nr: TRX 9760
Copied
Traxxas 9760 Spring, shock (GTM) (0.155 rate) (1 pair) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.165 rate) (1 pair) Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 9757 Shock Springs GTM (rate 0.072) (2) TRX-4M
Traxxas 9757 Shock Springs GTM (rate 0.072) (2) TRX-4M
Art.nr: TRX 9757
Copied
Traxxas 9757 Spring, shock (GTM) (0.072 rate) (1 pair) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.077 rate) (1 pair) Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

39,-

49,-

KJØP
-20%
Viser 3821 til 3830 (av 14968 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png