Absima 1810109 1:18 EVO Crawler «Power Wagon V2» ...

Art.nr: 1810109

Copied

It doesn't need much space and the playground is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles.   The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!     New EVO Features and Functions New* oversized 130 "Crawler Spec" brushed motor (100T) New* developed 2-speed steel gear shift (switchable on radio CH3) New extreme portal axles with steel gears for even more ground clearance New* motor mount (even for bigger motors like 180 & 240 size) New* reinforced drive shafts front & rear New* LCG-optimized chassis layout (Low Center of Gravity) and also... 2.4GHz radio system Vehicle lighting operated from the transmitter (CH4)   Oversize 1.2" AT wheels with internal beadlock system 1kg steering servo with panhard bar PPX4 water-resistant electronics Metal chassis frame Painted 1.2mm Lexan body Tight turning circle of 80cm  Driving time of up to 45 minutes     Steering angle of up to 45° Maximum ground clearance thanks to portal axels and 1.2" wheels  - Scale: 1:18 - 4WD all-wheel drive - 2.4GHz radio system       - "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4) - 100T / 130size brushed motor - Differentials fully locked (front & rear) - Telescopic UJ cardan shafts - Metal chassis frame - Drag/Mountain brake (prevents rolling on hills) - Digital proportional control for sensitive driving maneuvers - LED lighting (CH4) - Scale body with many attachment parts - 1.2" bead lock wheels with super soft AT tires - Waterproof 1kg mini steering servo - 2-in-1 speed controller/receiver unit - Driving time: approx. 45 minutes     Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A Remote control: 2.4GHz, 4-channel Steering servo: 1kg actuating force, waterproof Motor: 100T - 130 oversize Newly developed 2-speed gears Steel drive and portal axle gears Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1 Battery: LiPo 7.4V/2S 600mAh Battery connector system: Molex 2-pin Wheelbase: 160mm Ground clearance: 37mm Track width: 110mm Length: 250mm Width: 125mm Height: 135mm Weight: 390g (incl. drive battery) Wheels: 19.5x58mm        Whats in the box:  1* Mini EVO Crawler 1* 2.4GHz radio system 1* LiPo battery 7.4V 600mAh 1* USB charging cable 1* Sticker sheet 1* Manual DE/EN/FR 1* Mini tool set    Whats needed: 4* AAA Batteries for the radio

2.195,-

2.595,-

KJØP

-15%

Absima 1810110 1:18 EVO Crawler «Power Wagon V2» ...

Art.nr: 1810110

Copied

It doesn't need much space and the playground is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles.   The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!     New EVO Features and Functions New* oversized 130 "Crawler Spec" brushed motor (100T) New* developed 2-speed steel gear shift (switchable on radio CH3) New extreme portal axles with steel gears for even more ground clearance New* motor mount (even for bigger motors like 180 & 240 size) New* reinforced drive shafts front & rear New* LCG-optimized chassis layout (Low Center of Gravity) and also... 2.4GHz radio system Vehicle lighting operated from the transmitter (CH4)   Oversize 1.2" AT wheels with internal beadlock system 1kg steering servo with panhard bar PPX4 water-resistant electronics Metal chassis frame Painted 1.2mm Lexan body Tight turning circle of 80cm  Driving time of up to 45 minutes     Steering angle of up to 45° Maximum ground clearance thanks to portal axels and 1.2" wheels  - Scale: 1:18 - 4WD all-wheel drive - 2.4GHz radio system       - "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4) - 100T / 130size brushed motor - Differentials fully locked (front & rear) - Telescopic UJ cardan shafts - Metal chassis frame - Drag/Mountain brake (prevents rolling on hills) - Digital proportional control for sensitive driving maneuvers - LED lighting (CH4) - Scale body with many attachment parts - 1.2" bead lock wheels with super soft AT tires - Waterproof 1kg mini steering servo - 2-in-1 speed controller/receiver unit - Driving time: approx. 45 minutes     Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A Remote control: 2.4GHz, 4-channel Steering servo: 1kg actuating force, waterproof Motor: 100T - 130 oversize Newly developed 2-speed gears Steel drive and portal axle gears Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1 Battery: LiPo 7.4V/2S 600mAh Battery connector system: Molex 2-pin Wheelbase: 160mm Ground clearance: 37mm Track width: 110mm Length: 250mm Width: 125mm Height: 135mm Weight: 390g (incl. drive battery) Wheels: 19.5x58mm        Whats in the box:  1* Mini EVO Crawler 1* 2.4GHz radio system 1* LiPo battery 7.4V 600mAh 1* USB charging cable 1* Sticker sheet 1* Manual DE/EN/FR 1* Mini tool set    Whats needed: 4* AAA Batteries for the radio

2.195,-

2.595,-

KJØP

-15%

Absima 10035 1:20 EP Truggy Rapid Orange 4WD RTR

Art.nr: 10035

Copied

ABSIMA presents the compact and powerful 1:20 off-road series. These 4WD trucks combine the capabilities of real RC models with a handy size and can therefore be used quickly and anywhere.   The robust off-roaders have an aluminium cardan shaft drive, independent wheel suspension and differentials (v/h) to ensure optimum power transmission. The proportional steering ensures precise handling in every situation and the fibreglass-reinforced plastic forgives many a driving error. In addition, aluminium drive shafts provide plenty of propulsion. If the top speed of 32 km/h is too fast for you at the start or if you want to drive the cars indoors, you can reduce the top speed continuously using the rotary control. The Absima 1:20 RC car series offers an exciting, durable and user-friendly driving experience that is perfect for both experienced RC enthusiasts and newcomers alike. Of course, as usual, you will find all SPARE PARTS for our vehicles!   All RC cars in this series come with a 600mAh Li-Ion battery, a practical USB charger, a 2.4GHz remote control and a waterproof receiver/speed controller. The small off-road monsters are powered by an optimised 370 motor, which ensures an impressive top speed and acceleration. An additional aluminium heat sink ensures reliable performance even during prolonged use. Each of the vehicles has a fully detailed and designed body and each vehicle type has its own visual and technical advantages. While the Rock-Racer and Desert-Runner feature driver figures and a spare wheel, the Race-Truggy comes with extra-large off-road wheels and a thick rear spoiler. In addition, all vehicles are equipped with LED lighting, which allows them to be used in poor lighting conditions and thus extends the playing time even after sunset.   YOUR TASTE, YOUR DECISION! Speed: +/- 32 km/h Driving time: +/- 12 minutes per battery charge Motor: 370 brushed motor (24,000 rpm) ESC/RX unit: 45A 2S waterproof; BEC connector 2.4GHz remote control (range approx. 80m; speed adjustable) 0.9kg steering servo 7.4V/2S Li-Ion battery with 600mAh (BEC connector) 4WD aluminium cardan shaft drive Aluminium drive shafts (CVDs at the front) Independent suspension Shock absorbers with aluminium cap Differentials (front & rear) USB charger LED lighting Length: 250mm Width: 180mm Height: 95mm Wheelbase: 147mm Weight (without bat.): 540g Whats in the box:   1* 1:20 Race Truggy "Rapid" 1* 2.4GHz remote control 1* 600mAh Li-Ion battery 1* USB charging cable 1* Mini screwdriver 1* Mini cross tool 1* Instruction manual   REQUIRED ACCESSORIES:   3* AA batteries for the transmitter

1.095,-

1.195,-

KJØP

-8%

Absima 1810416 1:18 CR-18P Rushmore BLS 2024 Cyan RTR

Art.nr: AB1810416

Copied

The CR-18P was launched on 2021 with good success with the portal axle version. Now that the car has been on the market for more than 2 years, we have received many good ideas and suggestions from our fans on how to make our cars even better. Absima worked together with FURITEK on the new CR-18P. The vehicle was equipped with the proven FURITEK Lizard brushless ESC and the Venom brushless motor. In line with our development philosophy, the new upgrades to the chassis including the brushless system, will take the CR-18P to the next level of evolution without breaking the fans' wallets. Whats in the box:   1:18 CR18P Rushmore 2024 Furitek Lizard Lite 30A/50A Dual-Mode ESC  Furitek VENOM 1212 3450KV Outrunner BL Motor ESC programming card 7.4V/2S LiPo 600mAh 4-CH Radio/Receiver USB Charger Manual Cross Wrench

2.995,-

3.495,-

KJØP

-14%

Absima 1810419 1:18 Crawler "CR18P V3" T-Hunter BL ...

Art.nr: AB1810419

Copied

Just two years into the platform, we are on our 3rd iteration due to the constant evolution of the 1/18 crawler market. Our customers’ feedback along with a lofty desire to stay at the forefront of the market, these refinements create an exciting new package that propels the CR18P, yet again, to a top contender in the 1/18 market and all at a lower price!     The heart of any crawler has to be the power system. Let’s face it, without a strong/ dependable/flexible power system the experience of the chassis would not be as enjoyable. This is why we’ve partnered with Hobbywing pushing the voltage range to 2S and 3S. This is a huge update as the 3S capable system offers an array of power options for different driving styles and terrain.     Another key upgrade to the V3 is 27% underdrive in the rear axle through the ring and pinion gear. Some may consider the front axle as overdrive in this case, naturally, as that’s the common language used. Technically they’re right, but we call it underdrive as the front axle is the same gearing as the 2024 version. All this to say that the faster rotation of the front drive and slower rotation of the rear drive creates more “suction” to the surface below creating a more planted, predictable and capable ascents.     Lastly, and probably the most attractive new feature of the CR18P V3, is the price for a complete RTR portal axle, full metal gear brushless scale crawler, this might be the most compelling ready-to-run scale crawler on the market. CR18P V3 Trail Hunter New Features: - Hobbywing Mini24 FOC Brushless ESC/1621 Outrunner Motor (2S-3S capable) - 27% Underdrive in the Rear V2 Axle - HD Revised Driveshafts Chassis Specifications: Total Length: 237mm Height: 120mm Weight: 444gr Wheelbase: 160mm Shocks: Oil-Filled (Oil not included) Drivetrain: Full time Locked 4WD Rim: Beadlock 1.2" Tires: 60mm Super Soft Competition Spec Compound Electronics: Transmitter: 2.4ghz 4-Channel ESC: Hobbywing Mini24 Brushless Motor: Hobbywing 3500kv 1621SL Outrunner Receiver: 4-Channel PPX4 grade water resistant. Battery: 7.4v 2S Li-Po 600mah Charger: USB with LED Status Indicator   CR18P V3 General Features: - Portal Axles Supreme clearance over traditional straight axles - Multiple gear ratios available as aftermarket support - Full metal gear drivetrain Including the single speed EVO transmission Super strong sintered transmission gears, axles and portal hubs - Oil shocks (oil not included) Linear tuning ability threaded shock collars - Counter-rotating rear driveshaft to minimize torque twist - SOA (Servo on Axle) - Super clearance 5-degree skid plate Creates added clearance in the rear portion of the wheelbase to aid in clearance of large obstacles and overhangs. - Aggressive shock and link geometry - Low center of gravity minded design - 1.2” Beadlock Wheels - Easy access tilt magnetic body (Trail Hunter) - Waterproof Electronics

2.995,-

3.495,-

KJØP

-14%

Viser 126 til 130 (av 130 produkter)