Hopp til innhold

102076-4 Maxx Slash 6s

Populært i denne kategorien

 
Art.nr: TRX 2990GX
Copied
This is the Completer Pack with the Traxxas EZ-Peak 100W Dual Battery Charger  with iD Auto Battery Identification,  and two Power Cell 11.1V 5000mAh 25C 3S LiPo Batteries.     FEATURES #2972 Charger   Charges 2S and 3S LiPo batteries  5-8 cell NiMH batteries  Traxxas's iD technology automatically configures and optimizes charge  settings for Traxxas iD equipped batteries  Charges two batteries simultaneously at up to 50W (4 amps) each, or  charges single battery at 100W (8 amp) output in High-Output  mode  Charges a NiMH and LiPo at the same time  Advanced Mode for full manual control of charger settings  Progress bar and audible alerts  Storage Mode prepares LiPo batteries for extended storage  30 day limited warranty through Traxxas beginning at date of  purchase  #2872X Batteries   Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas EZ-Peak 100W Dual Battery Charger with AC Power Cord,  Instructions, Cooling Fan  Two Power Cell 11.1V 5000mAh 25C LiPo 3S Batteries with High-Current  Connectors and Integrated Balance Plugs   SPECIFICATIONS Charger;  Input Power: 100-240V/50-60Hz  Output: 100W max  Charge Current: 1-4A (dual mode), 5-8A (high output mode)  Discharge Current Range: 500mA  Current Drain for Balance Ports: 500mA  Weight: 20.3oz (575g)  Dimensions: 7 x 5.4 x 2.2" (176 x 138 x 57mm)  Batteries;  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)

2.995,-

3.495,-

KJØP
-14%
Art.nr: TRX 2973
Copied
Traxxas EZ-Peak Live Dual Charger The new EZ-Peak™ Live Dual charger takes the same great features of the original EZ-Peak Live and supercharges them for faster charging and dual 4S battery charging. Exclusive Traxxas iD technology makes 1-button charging a reality. Just plug in an iD-equipped NiMH or LiPo battery and press start. Nothing could be easier! The new MAXX Charge feature fast charges one battery at the highest rate to get you back in the action sooner than ever, while continuing to supply the remaining available power to the second battery. Take full control over charging features with the revolutionary high-definition full color EZ-Peak Live App for your mobile device. When it comes to fast and easy charging, nothing beats Traxxas! Quick Features on EZ-Peak Live Dual (#2973G) iD Charger: 200 Watt 26+ amp output Recognizes iD-equipped batteries to optimize charger settings MAXX Charge feature gets you back in the action quickly Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface with dual LED charge progress indicators Supports Traxxas EZ-Peak Live Application Audible alerts Dual high-flow cooling fans Advanced Mode for full manual control through EZ-Peak Live App Legacy support for all Traxxas High-Current Connectors Integrated dual balance ports for conventional LiPo batteries Built-in 2-amp USB charger output port Charges Dual 5-8-cell NiMH batteries Charges Dual 2s, 3s, and 4s LiPo Batteries Patent Pending iD Technology There has never been an easier or safer way to charge your batteries than the Traxxas iD system. Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! Traxxas pioneered this exclusive technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. MAXX Power Faster charging means more time behind the wheel. The new MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun. Charging Flexibility The EZ-Peak Live Dual is a true multi-chemistry charger. The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Even the largest 4-cell LiPo batteries are no problem with up to 16 amps of charging horsepower per side. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device. No other charger features EZ-Peak Live’s combination of power and flexibility with iD safety and simplicity. Technology Traxxas pushes the technological envelope to provide you the fastest, most convenient charging experience possible. Not only is EZ-Peak Live Dual our most powerful charger ever, it’s also our most advanced. The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. This is charging the Traxxas way—fast, easy, and more advanced than ever!   App Features: Important Customer Note: Accessing some charger features requires a mobile device with Bluetooth® capability (sold separately) and the Traxxas EZ-Peak Live Application. EZ-PEAK LIVE DUAL (#2973G) SPECIFICATIONS: AC Input: 100-240V, 50-60Hz, 2.35A Charge Current Range: 1.0—26.0A+ Discharge Current Range: 750mAh Current Drain for Balance Ports: 750mAh NiMH Battery Cell Count: 5-8 Cells LiPo Cell Count: 2-4 Cells Dimensions: 204 x 174 x 68mm Compatible Connectors:

2.295,-

2.595,-

KJØP
-12%
Art.nr: TRX 6507R
Copied
This is the Traxxas TQi 4-Channel 2.4GHz Transmitter with 5-Channel Receiver, TSM* (Traxxas Stability Management) and Traxxas Bluetooth Module. Servos Not Included. FEATURES Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned from 0-100%, or turned off by adjusting the multi- function knob on the TQi transmitter Can be equipped with the TQi Docking Base along with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Simple two-button programming interface Automatic model recognition recalls settings for up to 30 Traxxas Link enabled models Adjustable throttle and steering endpoints Five channel receiver with three telemetry ports Internal antenna High 13ms frame rate and near zero latency for responsive control Built-in failsafe returns throttle to last saved neutral position Multi-Function knob can be programmed to control Steering Sensitivity Throttle Sensitivity, Steering Percentage, Braking Percentage, or Throttle Trim INCLUDES Traxxas TQi 4-Channel 2.4GHz Transmitter Bluetooth Module, TRX 6511 5-Channel TSM Receiver, TRX 6533 REQUIREMENTS AA Batteries: Four for transmitter Servos of modeler's choice

2.095,-

2.295,-

KONTAKT
-9%
Art.nr: TRX 2085RL
Copied
Traxxas 2085RL - Digital High Torque Metal Gear BB WP Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof The High Torque Maxx Servo is the ultimate steering upgrade for your X-Maxx®, XRT®, or Maxx®. With a staggering 46.8kg/cm of torque and full steel gears, the High Torque Maxx Servo delivers total steering authority on even the largest Sledgehammer® tires. The case features an anodized aluminum center section with cooling fins and ball bearings for increased precision. The servo includes a stiffer servo saver spring and steel steering linkage for maximum steering authority and control during high speed driving. Servo requires Maxx® mount found in Maxx, X-Maxx®, and XRT®. Does not fit other vehicles. FEATURES: Fits X-Maxx, XRT, and Maxx trucks Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management® (TSM) 46.8kg/cm torque at 6.0 volts 0.13 sec/60° at 6.0 volts Full steel gears Full ball bearings Aluminum center case with cooling fins Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT®

1.495,-

1.695,-

KJØP
-12%
Art.nr: TRX 6553X
Copied
Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.

1.549,-

1.695,-

KJØP
-9%
Art.nr: TRX 2971GX
Copied
Fast, easy and Bluetooth-compatible! Introducing the EZ-Peak Live, the most powerful, most advanced charger ever offered by Traxxas! Compatible with 5-8 cell NiMHs and 2-4S LiPos, the EZ-Peak Live is equipped with built-in Bluetooth to work seamlessly with the EZ-Peak Live app for Apple and Android devices. It provides you detailed battery pack information, remote monitoring and advanced operating functions through the HD color interface on your device. Patent-pending iD technology makes charging as easy as plugging in your battery and pressing “Start!” 100-Watt 12-amp output. Recognizes Traxxas iD-equipped batteries to automatically program and optimize charger settings. LED charge progress indicator. Optimized for faster LiPo balance charging. One-button LiPo storage charge protects your battery investment. Advanced high-resolution peak detection delivers a perfect charge. Easy-to-use interface. Supports Traxxas EZ-Peak Live Application, compatible with Apple and Android devices. Audible alerts. Built-in cooling fan. Advanced Mode for full manual control through the EZ-Peak Live App. Legacy support for all Traxxas High-Current Connectors. Built-in balance port for conventional LiPo batteries. Charges 5-8 cell NiMH batteries. Charges 2S, 3S and 4S LiPo batteries. AC Input: 100-240V, 50-60Hz, 1.5A.   Traxxas iD Battery Type Capacity EZ-Peak Live™ Maximum Charge Rate 6-cell NiMH 1200-1800mAh 2A 3000-4200mAh 4A 4300-5000mAh 5A 7-cell NiMH 3000-4200mAh 4A 4300-5000mAh 5A 8-cell NiMH 3000-4200mAh 4A 4300-5000mAh 5A 2-cell LiPo, 7.4v 6000-10000mAh 12A 3-cell LiPo, 11.1v 4500-8400mAph 9A 4-cell LiPo, 14.8v 3400-6700mAh 6.7A     This is the Traxxas EZ-Peak Live 12Amp NiMH/LiPo Fast Charger  with iD Auto Battery Identification and Bluetooth.   FEATURES Optimized for Traxxas NiMH and LiPo battery packs  Built-in Bluetooth works seamlessly with the Traxxas EZ-Peak Live  app for iOS and Android devices  Free EZ-Peak Live app provides access to high definition graphical  interface, firmware upgrades, remote monitoring, alerts for up to  four chargers, detailed live charging info and the ability to  turn off iD mode  Traxxas iD system detects which Traxxas iD equipped battery is  connected and automatically configures settings for fastest charge  iD mode may be switched off through the EZ-Peak Live Application  for charging older Traxxas batteries with non-iD high-current  connectors  12A LiPo charging rate  5A NiMH charging rate  EZ-Peak Live Storage Mode prepares LiPo batteries for extended  storage  Charge status LEDs INCLUDES EZ-Peak Live NiMH/LiPo Fast Charger with iD Auto Battery  Identification and Bluetooth, Battery Connector, and Balance  connector   REQUIREMENTS LiPo charging bag if charging LiPo batteries   SPECIFICATIONS  AC Input: 100-240V, 50-60Hz, 1.5A  Charger Output: 100W, 4-19V  Charge Current Range: 1.0-12A  Discharge Current Range: 665mAh  Current Drain for Balance Ports: 665mAh  LiPo Battery Cell Count: 2-4S  NiMH Battery Cell Count: 5-8 cells  Dimensions: 5.2 x 6.6 x 2.2" (133 x 169 x 55mm)  Weight: 1.15lbs (526g)

1.395,-

1.495,-

KJØP
-7%
Art.nr: TRX 2972G
Copied
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

KJØP
-7%
Art.nr: TRX 8950X
Copied
Driveshafts, steel constant-velocity (assembled), front or rear (4) (#8654, 8654G, or 8654R and #7758, 7758G, or 7758R required for a complete set) Steel constant velocity driveshafts offer the ultimate in torque handling and efficient power transfer for high-power brushless applications. On the axle side, bearings secure the drive pins in place to prevent back-out. Large-bore drive pins are press-fit on the differential side and slot into the heavy-duty steel drive cups. The included bearings are rubber-sealed to keep out dirt while a durable black-oxide coating helps prevent rust on the drive gear. Traxxas’ unique, splined telescoping design delivers full-range articulation, so there is never a need to limit suspension travel. Does not fit Maxx models with WideMaxx.

1.295,-

1.395,-

KJØP
-7%
Art.nr: TRX 10290
Copied
Traxxas 10290 - High-Intensity Maxx Slash LED Light Kit QUICK FEATURES ON MAXX SLASH LED LIGHT KIT (10290): ­Compatible with Velineon VXL-6s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions:* - Turn lights on/off remotely - Build a custom dashboard - Customize lighting configurations and actions - Add additional lighting components Maxx Slash redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx Slash's extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power the high-power light bar, while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. ­ MAXX SLASH LED LIGHT KIT (10290) INCLUDES: High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware

1.249,-

1.349,-

KJØP
-7%
Art.nr: TRX 6530X
Copied
Traxxas 6530 TQi 2.4Ghz 4-Channel Transmitter w/Link Enabled (Transmitter Only) This is a replacement Traxxas TQi 2.4Ghz 4-Channel Transmitter. The TQi transmitter is compatible with the Traxxas Link Wireless Module (TRX 6511) that turns your iPhone, iPad, or iPod touch into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks your radio system for ultimate vehicle control. In addition to adjusting the TQi radio system's advanced features via a visual and intuitive interface, real-time telemetry becomes available through a customizable dashboard. Prepare to unlock the full potential of the TQi 2.4GHz radio system through the Traxxas Link Wireless Module. TQi Transmitter Features: High Output signal for maximum range Integrated internal antenna Simple 2-Button Interface Steering trim and Multi-Function knobs Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points Automatically stores and loads settings for up to 30 Traxxas Link Model Memory enabled models—just switch on and drive, "model selection" is not required. High 13ms frame rate and near-zero latency for responsive control Comfortable ergonomic design Updated steering wheel and foam grip Operates on just 4 AA batteries Traxxas Link Wireless Module Features: Compatible with Apple iPhone, iPad, and iPod touch Use with the powerful Traxxas Link app View real-time telemetry with optional sensors Bluetooth low energy Easy and simple device pairing Powered by TQi transmitter Integrated into transmitter body Quick and easy installation, installs in minutes Traxxas Link Wireless Module included with select Traxxas vehicles Traxxas Link Application Features: Available on the App Store Intuitive iPhone, iPad, and iPod touch interface Customizable Dashboard Dial or digital readout gauges Up to nine gauges can be displayed at one time Set threshold warnings and log maximums, minimums, or averages Review telemetry feedback via the dashboard recording function that includes sound Instant replay feature captures the previous 60-seconds of dashboard activity Recordings can be named and saved See telemetry feedback from electric and nitro models for speed, temperature, and voltage Edit, save, and share drive profiles Visually manage an unlimited number of models with the Traxxas Link App and see: Transmitter model history Model names Customizable settings Profiles Note: This transmitter does not include the Link Wireless Module, it must be purchased separately (TRX 6511). Traxxas offers this transmitter with the wireless module and one TSM (Traxxas Stability Management) receiver (TRX 6507R). 

1.199,-

1.299,-

KJØP
-8%
Art.nr: TRX 2085XL
Copied
Traxxas 2085XL - Digital High Torque Metal Gear BB WP servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link The Maxx®-Duty metal-gear steering servo features full all-metal gears and ball bearings for increased precision. The Maxx-duty servo puts out 23% more torque than the standard 2085 servo to take on the most extreme environments. The servo includes a stiffer servo saver spring and steel steering linkage for maximum steering authority and control during high speed driving. Servo requires Maxx® mount found in Maxx and X-Series™ vehicles. Replacement part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT® Servo requires Maxx® mount found in Maxx and X-Series™ vehicles.

1.195,-

1.295,-

KJØP
-8%
Art.nr: TRX 2981
Copied
Traxxas 2981G - EZ-Peak Plus Charger, 4S, 8A, NiMH/LiPo, Auto ID Powerful. Easier. Safer. 4S LiPo Compatibility with 8 Amps of Charging Power! There has never been an easier or safer way to charge your batteries than the Traxxas iD® system. Just plug a Traxxas iD-equipped battery into the EZ-Peak® Plus 4s and press Start - that’s all there is to it! Traxxas pioneered this exclusive iD technology to eliminate complicated charger programming. The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the charger’s settings for the optimal charge. An LED progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. One-button Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. With up to 8 amps of charging power, the EZ-Peak Plus 4s is the fastest, easiest, and most convenient way to charge your Traxxas batteries. Quick Features on EZ-Peak Plus 4s Charger 75-Watt 8-amp high output Easy to use interface with charge progress indicator and audible alerts Automatically recognizes Traxxas iD® batteries for optimal charger settings Optimized for faster LiPo balance charging One-button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Built-in cooling fan Advanced Mode for full manual control of charger settings Built-in balance port for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S, 3S, and 4S LiPo Batteries Power and Convenience The faster your batteries charge, the sooner you’re back out having fun. No one understands this better than Traxxas which is why we outfitted the EZ-Peak Plus 4s with 8 full amps (75 watts) of charging power. The charger automatically detects the type of iD-equipped battery you are using and then configures the settings for the fastest charge possible. NiMH batteries charge faster than ever with 4 amps of charging power. LiPo batteries charge even faster with up to 8 full amps. A large 40 mm cooling fan keeps the temperatures down inside the charger for powerful charging sessions. A balance port is built into the charger for older-style LiPo batteries with external balance leads. The EZ-Peak Plus 4s combines EZ-Peak power with the safety of Traxxas’ exclusive iD technology in one convenient and easy-to-use package. Compatible Connectors: EZ-PEAK PLUS 4S (#2981) SPECIFICATIONS AC Input: 100-240V, 50-60Hz, 1.2A Charge Current Range: Up to 8A Discharge Current Range: 500mA Current Drain for Balance Ports: 500mA NiMH Battery Cell Count: 5-8 Cells LiPo Cell Count: 2-4 Cells Net Weight: 365g Dimensions: 121 x 161 x 54 mm

1.195,-

1.295,-

KJØP
-8%
Art.nr: TRX 6529
Copied
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3-channel (transmitter only)   Traxxas 6529 TQi 2.4GHz 3-Channel Radio System (Link Enabled) (Transmitter Only) This is a replacement Traxxas TQi 2.4Ghz 3-Channel Transmitter. The TQi transmitter is compatible with the Traxxas Link Wireless Module (TRX 6511) that turns your iPhone, iPad, or iPod touch into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks your radio system for ultimate vehicle control. In addition to adjusting the TQi radio system's advanced features via a visual and intuitive interface, real-time telemetry becomes available through a customizable dashboard. Prepare to unlock the full potential of the TQi 2.4GHz radio system through the Traxxas Link Wireless Module. TQi Transmitter Features: High Output signal for maximum range Integrated internal antenna Simple 2-Button Interface Steering trim and Multi-Function knobs Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points Automatically stores and loads settings for up to 30 Traxxas Link Model Memory enabled models—just switch on and drive, "model selection" is not required. High 13ms frame rate and near-zero latency for responsive control Comfortable ergonomic design Updated steering wheel and foam grip Operates on just 4 AA batteries Traxxas Link Wireless Module Features: Compatible with Apple iPhone, iPad, and iPod touch Use with the powerful Traxxas Link app View real-time telemetry with optional sensors Bluetooth low energy Easy and simple device pairing Powered by TQi transmitter Integrated into transmitter body Quick and easy installation, installs in minutes Traxxas Link Wireless Module included with select Traxxas vehicles Traxxas Link Application Features: Available on the App Store Intuitive iPhone, iPad, and iPod touch interface Customizable Dashboard Dial or digital readout gauges Up to nine gauges can be displayed at one time Set threshold warnings and log maximums, minimums, or averages Review telemetry feedback via the dashboard recording function that includes sound Instant replay feature captures the previous 60-seconds of dashboard activity Recordings can be named and saved See telemetry feedback from electric and nitro models for speed, temperature, and voltage Edit, save, and share drive profiles Visually manage an unlimited number of models with the Traxxas Link App and see: Transmitter model history Model names Customizable settings Profiles Note: This transmitter does not include the Link Wireless Module, it must be purchased separately (TRX 6511).

1.095,-

1.195,-

KONTAKT
-8%
Art.nr: TRX 6551X
Copied
Telemetry GPS module 2.0, TQi radio system.  - Provides accurate speed data using GPS and GLONASS technology  - Plug and play installation  - Easy to read status LED Use with Telemetry Expander 2.0 (6550X).  Does not work with Telemetry Expander (6550)

1.095,-

1.195,-

KJØP
-8%
Art.nr: TRX 8712
Copied
Traxxas 7-Piece Metric Hex and Nut Driver Essentials Set Maximum Durability Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™. 7-Piece Metric Hex and Nut Driver Essentials Set (#8712): Precision-ground, hardened steel metric hex drivers Machined, hardened steel nut drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm Nut drivers: 5.0 mm, 5.5 mm, 7.0 mm, 8.0 mm

949,-

1.049,-

KJØP
-10%
Art.nr: TRX 8799X
Copied
Traxxas 8799X - Maxx® Stainless Bearing Kit Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in wet conditions. High quality black seals offer ultimate protection from the elements with less maintenance in dirty environments. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. ­ MAXX STAINLESS STEEL BEARING KIT FEATURES Long-lasting performance in wet conditions Stainless steel construction High quality black-seals Individual box compartments Handy label for identifying parts Fits MAXX®

949,-

999,-

KJØP
-5%
Art.nr: Bulk TRX 2085
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is the High-Torque Digital Waterproof Steering Servofor the Traxxas X-Maxx Monster Truck. FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo with Wire Lead and Connector SPECIFICATIONS Torque: 365oz/in Speed: 0.17 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink Weight: 3.6oz (103g) including heat sink

599,-

899,-

Ikke på lager
-33%
Art.nr: TRX 2085
Copied
Dette er en servo med plast tannhjul så vi i SamiRC anbefaler at du heller tar TRX 2085RL   This is the High-Torque Digital Waterproof Steering Servofor the Traxxas X-Maxx Monster Truck. FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo with Wire Lead and Connector SPECIFICATIONS Torque: 365oz/in Speed: 0.17 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink Weight: 3.6oz (103g) including heat sink

829,-

899,-

KJØP
-8%
Art.nr: TRX 5038X
Copied
Traxxas Premium Shock Oil Set 60ml including Rack (7 oils) New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: The best way to organize the full lineup of oil from Traxxas! Premium bearing spinner provides smooth movement Holds 7 bottles to organize the full set of oils Includes seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 20-80WT (200-1000cSt) Bottle sizes: 60ml

699,-

859,-

KJØP
-19%
Art.nr: TRX 10246-BLUE
Copied
Traxxas 10246-BLUE - Aluminum Bellcrank Assembly Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your short course machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely for silky-smooth turning action. The set includes aluminum supports, servo saver bushing, drag link, and hardware. Add the 10247 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. ­ Includes bellcranks, posts, drag link, servo saver bushing, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 10247 aluminum servo horn Accessory part for: Maxx® Slash®

779,-

819,-

KJØP
-5%
Art.nr: TRX 10246-RED
Copied
Traxxas 10246-RED - Aluminum Bellcrank Assembly Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your short course machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely for silky-smooth turning action. The set includes aluminum supports, servo saver bushing, drag link, and hardware. Add the 10247 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. ­ Includes bellcranks, posts, drag link, servo saver bushing, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 10247 aluminum servo horn Accessory part for: Maxx® Slash®

779,-

819,-

KJØP
-5%
Art.nr: TRX 10246-ORNG
Copied
Traxxas 10246-ORNG - Aluminum Bellcrank Assembly Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your short course machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely for silky-smooth turning action. The set includes aluminum supports, servo saver bushing, drag link, and hardware. Add the 10247 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. ­ Includes bellcranks, posts, drag link, servo saver bushing, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 10247 aluminum servo horn Accessory part for: Maxx® Slash®

779,-

819,-

KJØP
-5%
Art.nr: TRX 10246-GRN
Copied
Traxxas 10246-GRN - Aluminum Bellcrank Assembly Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your short course machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely for silky-smooth turning action. The set includes aluminum supports, servo saver bushing, drag link, and hardware. Add the 10247 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. ­ Includes bellcranks, posts, drag link, servo saver bushing, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 10247 aluminum servo horn Accessory part for: Maxx® Slash®

779,-

819,-

KJØP
-5%
Art.nr: TRX 10246-GRAY
Copied
Traxxas 10246-GRAY - Aluminum Bellcrank Assembly Enhance the steering precision, strength, and looks of your Maxx® Slash® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your short course machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely for silky-smooth turning action. The set includes aluminum supports, servo saver bushing, drag link, and hardware. Add the 10247 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. ­ Includes bellcranks, posts, drag link, servo saver bushing, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 10247 aluminum servo horn Accessory part for: Maxx® Slash®

779,-

819,-

KJØP
-5%
Art.nr: TRX 2970GX
Copied
EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification   One connection does it all! The Traxxas iD® battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak® Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus (#2970) does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service. 1, 2, 3... Easy Steps! ­ ­ QUICK FEATURES ON EZ-PEAK PLUS (#2970) CHARGER ­ Recognizes Traxxas iD® batteries to automatically program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s and 3s LiPo batteries ­ ­     EZ-PEAK PLUS (#2970) SPECIFICATIONS AC Input: ­ 100–240 Volts Charge Current Range: ­ 1.0-4.0A (40W Max.) Discharge Current Range: ­ 500mAh Current Drain For Balance Ports: ­ 500mAh NiMH Battery Cell Count: ­ 5–8 Cells LiPo Cell Count: ­ 2–3 Cells Net Weight: ­ 365g Dimensions: ­ 146 x 123 x 53mm     MODEL 2970: EZ-Peak® Plus 4-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification.

699,-

769,-

KJØP
-9%
Viser 1 til 25 (av 195 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png