Roto Start back plate for the F & G Series Nitro Star Engines that use a 14mm hex one-way bearing.
To use this back plate, your F or G Series engine must be fitted with #107829 - ONE WAY BEARING 14mm HEX FOR PULLSTART/ROTOSTART
Use with any Starter unit from a Roto Start or Roto Start 2 system
For HPI Nitro Star F/G Series Pullstart Engines/Requires a 7.2V rechargeable "stick" battery pack and charger.
Get things going quickly with the Roto Start 3 starting system, The Roto Start 3 lets you use a handheld starting unit so you don’t have to deal with starting the engine by hand - it really doesn’t get any easier to get running!
The Roto Start 3 has an Xtra-Long starting wand to make sure you can get through to the back of the engine without struggle even on the Savage XL 5.9
To protect your engine, the Roto Start 3 features a built in circuit breaker which cuts off in case of an overload (e.g. a flooded engine).
This HPI Nitro Roto Start 3 system is for the F & G series engines that use a 14mm One-Way Bearing.
The G3.0 engines #15105 & #101310 use a 12mm One-Way Bearing. For these engines, change the bearing to #107829.
Available separately:
#160242 Roto Start 3 Hand Unit Only
#160243 Roto Start 3 Starter Shaft 225mm Only
#120277 Rotostart 3 Back Plate for 14mm Hex
Not Included:
Requires a 7.2V NiMH stick battery pack for operation.
HPI Racing 101294 Shock Body Set (2Sets)
BULLET SERIES
Genuine HPI quality spare part for easy maintenance and repairs
The Bullet factory setup uses #350cst Silicone Oil in all the Shocks
This Part Fits the following kits / parts:
Bullet ST 3.0
Bullet MT 3.0
Bullet ST Flux
Bullet MT Flux
Bullet ST 3.0 w/ 2.4GHz
Bullet MT 3.0 w/ 2.4GHz
RTR Bullet ST Flux W/ 2.4GHz
Bullet MT Flux w/ 2.4GHz
Bullet ST 3.0
Bullet MT 3.0
Bullet ST Flux
Bullet MT Flux