Hopp til innhold

Nye produkter

Art.nr: TRX 9630
Copied
Traxxas 9630 Tie bars, rear, 7075-T6 aluminum (blue-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® rear tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
Art.nr: TRX 9629T
Copied
Traxxas 9629T Tie bars, front, 7075-T6 aluminum (orange-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® front tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
Art.nr: TRX 9629G
Copied
Traxxas 9629G Tie bars, front, 7075-T6 aluminum (green-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® front tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
Art.nr: TRX 9629
Copied
Traxxas 9629 Tie bars, front, 7075-T6 aluminum (blue-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® front tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

KJØP
-8%
KJØP
Art.nr: 73412
Copied
RPM Mock Intake & Blower Set - Black Quick Notes: Fits most 1/8th – 1/10th scale bodies Matching Zoomies Mock Exhaust Headers also available Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off to the world that your car is “supercharged”. We have just the thing to make that happen. Our new Mock Intake & Blower Set will take the scale realism of your favorite muscle car or monster truck to a whole new level and show off that muscle you know it has! The RPM molded Intake and Blower Set is finely detailed with such finishing touches as blower belt ridges, pulley splines and recessed butterflies in the scoop. Additionally, we made it simple to bolt it on to almost any hood that is relatively flat by angling the entire unit to 7°, a very typical hood slope. That means the blower unit will sit properly and accurately on a wide variety of applications. It all bolts together with only 3 small screws. Each RPM Intake & Blower Set comes complete with all the hardware you’ll need to bolt it to your favorite ride (you’ll need to supply your own 3mm dia drill & a 2mm hex driver) and even includes a wide support plate that bolts underneath the body to prevent hard impacts from ripping the blower assembly off of your vehicle.   Add in a set of our Zoomies Mock Exhaust Headers for the ultimate in scale realism! You already know your ride is ridiculously fast, step up the cool factor with RPM! Tech Notes: The RPM Mock Intake and Blower Set is for appearance only and is not a functioning unit. RPM warranty restrictions may apply due to the scale nature of the design. Please see the RPM warranty page for more information.

129,-

KJØP
Art.nr: TRX 6737X
Copied
Bumper, rear/ bumper mount (fits 4WD Rustler®) (for LED light kit installation)

119,-

KJØP
Art.nr: B9860
Copied
Denne er fin hvis du har en esc med Deans kontakt og har et batteri med Tamiya kontakt. DynoMAX Connector Adapter Tamiya (female) - T-Plug (female) This is an practical connector adapter for batteries with a Tamiya connector where you want to change it to a T-Plug without soldering etc.   It also works if you have an charge lead with an T-plug but you have an vehicle with a Tamiya connector system.

35,-

KJØP
Art.nr: TRX 82044-4RED
Copied
Traxxas 82044-4 Rød TRX-4 Sport High Trail Edition 1/10 Scale   Tough, Lightweight Pickup Truck Body High-angle bumpers for increased clearance Molded grille and tailgate LED-ready headlights, tail lights Full Nylon composite wheel wells and floor pans   Scale Accessories Rugged Expedition Rack with detailed accessories Injection-molded snorkel and side mirrors   Clipless Body mounting Clipless design for smooth body appearance Rugged internal body cage for added rigidity Body details mount directly to internal frame   Trail-tuned XL-5™ HV Waterproof Electronic Speed Control Fully waterproof design Five drive profiles Sport Mode — forward / brake / reverse Race Mode — forward / brake / no reverse Training Mode™ - 50% forward / 100% brake / 50% reverse (patented) Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake Traxxas EZ-Set® one-button setup Large, efficient heat sink Wide voltage latitude 6–7 cell NiMH (7.2–8.4 V) and 2–3s LiPo (7.4–11.1 V) Two stage low voltage protection (LVD)   Titan® 550 Motor Powerful Titan 21T reverse rotation motor with internal cooling fan Precision, preset gear mesh adjustments Motor retention separate from gear mesh   Portal Axles Increase ground clearance Eliminate torque twist Steel gears Improve axle geometry and reduce strain on driveshafts   Drivetrain Full-time shaft driven 4-wheel drive Tough 6 mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Spool-locked front and rear differentials Steel gear transfer case   Factory-Installed Long Arm Lift Kit Increases ground clearance over 1″ Maintains precise steering geometry Accommodates oversize 2.2″ wheels and tires   TQ™ 2.4 GHz 2-Channel Radio System Ergonomic transmitter with internal antenna Traxxas 6519 3-channel micro receiver with fail-safe security Patented O-ring sealed watertight receiver box keeps the micro receiver dry   Reinforced Steel Ladder Frame Full-length 1.5 mm thick steel frame rails Bumpers adjust fore and aft Rugged rock rails adjust for width Wire routing clips integrated into frame rails   Innovative Battery Compartment Hinged battery strap allows quick and easy battery access No pins to lose Accommodates different height batteries Accepts full-size long battery packs Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)   Transmission Single-speed with steel gears Dual horizontal shafts Twin friction plate slipper clutch Easily removed for servicing   Steering Chassis mounted 2075X metal gear digital servo Superior 45° steering angle Direct steering (no servo saver) Steering geometry corrected for bump steer   Suspension Front — 3 link with panhard Rear — Triangulated 4 link Heavy-duty rod ends with steel hollow balls 5 mm diameter steel link rods with 4 mm threaded ends   Extended Aluminum GTS Shocks Oil-filled coilover GTS shocks Extra-long aluminum bodies for greater articulation Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals   Oversize Wheels and Tires 2.2” 5-spoke wheels with replica beadlock rings Pre-mounted 2.2” Canyon Trail tires with trail-tuned foam inserts Trail tuned S1 rubber compound 12 mm steel hex   Sealed Ball Bearings Hex hardware with Rust-Resistant Black Oxide Coating Requires Battery and Charger (Sold Separately)

5.395,-

5.995,-

KJØP
-10%
Art.nr: TRX 7799
Copied
Tires, rubber (2) (fits Traxxas® #7775X wheelie bar wheels) Rubber wheelie bar tires look great and provide better grip than standard hard plastic wheels. (Fits 7775X wheelie bar wheels)

79,-

89,-

KJØP
-11%
Viser 3501 til 3510 (av 14968 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png