Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Tamiya El-Biler / Diverse Deler Tamiya

Diverse Deler Tamiya

Populært i denne kategorien

 
Hovedbilde Tamiya 50880 Ball Diff Plate Set
Tamiya 50880 Ball Diff Plate Set
Art.nr: 50880
Copied
             This the Ball Diff Plate Set for the TA04 from Tamiya FEATURES: Steel construction INCLUDES: Two diff plates REQUIRES: Installing on the vehicle SPECS:    Thickness: .7mm           Diameter:  19mm OD    12.9mm ID

59,-

KJØP
Hovedbilde Tamiya 50882 Kingpin Set TA04 (4)
Tamiya 50882 Kingpin Set TA04 (4)
Art.nr: 50882
Copied
 This is the Kingpin Set from Tamiya for the TA-04 chassis cars. FEATURES: Black steel kingpins INCLUDES: Four kingpins REQUIRES: Installing on vehicle COMMENTS: Works only for the Tamiya TA-04 kits

35,-

KJØP
Hovedbilde Tamiya 51048 Drive Shaft 42mm TB02
Tamiya 51048 Drive Shaft 42mm TB02
Art.nr: 51048
Copied
   This is a pair of Drive Shafts for the TB-02 chassis vehicles                                 from Tamiya. FEATURES: Constructed of steel, black in color Transfers power from the ball diff to the axle stubs INCLUDES: Two Drive Shafts for the TB-02 chassis vehicles REQUIRES: Installing between ball diff and axle stubs at front and rear SPECS:    Length: 1.6" (42mm)           Diameter: 0.12" (3mm) COMMENTS: Two sets are required per vehicle.

79,-

KJØP
Hovedbilde Tamiya 51253 TB EVO 5 B PARTS (BUMPER)
Tamiya 51253 TB EVO 5 B PARTS (BUMPER)
Art.nr: 51253
Copied
For: TB EVO 5 Material: Delrin Colour: Black Qty: 1Set

149,-

KJØP
Hovedbilde Tamiya 51346 Thrust Bearing Set F103
Tamiya 51346 Thrust Bearing Set F103
Art.nr: 51346
Copied
   This is the Thrust Bearing Set for the Tamiya F103 Chassis Vehicles. FEATURES: Steel construction           Ball bearing INCLUDES: One Thrust Bearing           Two Thrust Washers           One Ball Bearing REQUIRES: Installation on the vehicle

85,-

KJØP
Hovedbilde Tamiya 51353 D Parts Suspension Arm TB03
Tamiya 51353 D Parts Suspension Arm TB03
Art.nr: 51353
Copied
These are the D Parts (Suspension Arms) for the Tamiya TB-03 Chassis. FEATURES: Plastic construciton           Black in color INCLUDES: Two D-1 parts           Two D-2 parts REQUIRES: Installation on vehicle

95,-

KJØP
Hovedbilde Tamiya 51354 E Parts Rear Upright TB03
Tamiya 51354 E Parts Rear Upright TB03
Art.nr: 51354
Copied
 This is the E Parts Bag (Rear Upright) for use with the Tamiya TB-03 Chassis. FEATURES: Plastic construction           Black in color INCLUDES: One E Parts Bag (Rear Upright) REQUIRES: Installation on vehicle

49,-

KJØP
Hovedbilde TAMIYA 51621 M-08 CONCEPT GEARS
TAMIYA 51621 M-08 CONCEPT GEARS
Art.nr: 51621
Copied
TAMIYA 51621 M-08 CONCEPT GEARS  

65,-

KJØP
Hovedbilde Tamiya 53056 PIN TYPE WHEEL ADAPTER
Tamiya 53056 PIN TYPE WHEEL ADAPTER
Art.nr: 53056
Copied
PIN TYPE WHEEL ADAPTER

89,-

99,-

KJØP
-10%
Hovedbilde Tamiya 53141 Lightweight Kingpin R/C Touring Car (4)
Tamiya 53141 Lightweight Kingpin R/C Touring Car (4)
Art.nr: 53141
Copied
This is a replacement set of king pins for the Tamiya 4WD Touring & Rally Cars. FEATURES:    Made of a lightweight metal    Chrome in color SPECS:    7/16" long                     3/16" wide (at the widest part) INCLUDES:    (4) Lightweight king pins COMMENTS:    For use with the following Tamiya cars:  Top-Force Evolution, Top-Force, Terra Conqueror, Manta Ray, & the Touring & Rally cars.

79,-

KJØP
Hovedbilde Tamiya 53334 Low Friction Dampener V Parts
Tamiya 53334 Low Friction Dampener V Parts
Art.nr: 53334
Copied
This is replacement Low Friction Damper (shock), V-Parts                Works for Tamiya shocks FEATURES: Black plastic parts tree with collars to change damping rate INCLUDES: One set of V-parts REQUIRES: Installing on shocks COMMENTS: This will work only for the shocks listed above.

59,-

69,-

KJØP
-14%
Hovedbilde TAMIYA 53406 0.4 PINION GEAR (36T,37T)
TAMIYA 53406 0.4 PINION GEAR (36T,37T)
Art.nr: 53406
Copied
FEATURES: Steel construction.     Silver in color. Usable with: TA04 Pro     TB-Evolution     TA04 chassis with 50873     Gears are stamped with its size for easy identifictation while it is in your car. INCLUDES: Two Pinion Gears     Three Set Screws     One Allen Wrench SPECS: Teeth: 36 & 37     Pitch: 0.4

165,-

KJØP
Hovedbilde Tamiya 53407 0.4 Pinion Gear (38T,39T)
Tamiya 53407 0.4 Pinion Gear (38T,39T)
Art.nr: 53407
Copied
0.4 Pinion Gear (38T,39T)

165,-

KJØP
Hovedbilde Tamiya 53420 0.4 Pinion Gear (40T, 41T)
Tamiya 53420 0.4 Pinion Gear (40T, 41T)
Art.nr: 53420
Copied
0.4 Pinion Gear (40T, 41T)

129,-

KJØP
Hovedbilde Tamiya 53440 On-Road Spring Hard
Tamiya 53440 On-Road Spring Hard
Art.nr: 53440
Copied
This is an on-road tuned hard spring set from Tamiya.     FEATURES Features eight color coded springs.  Soft, medium, stiff,and extra stiff spring tensions.  These springs are ideal for high speed racing.   INCLUDES Two soft springs(red)  Two medium springs(yellow)  Two stiff springs(blue)  Two extra stiff springs(white)   SPECIFICATIONS Length- 26.3mm(1.03")  Diameter- 13.4mm(0.53")  

189,-

KJØP
Hovedbilde Tamiya 53444 Silicone Damper Oil Medium Set
Tamiya 53444 Silicone Damper Oil Medium Set
Art.nr: 53444
Copied
Developed for oil-filled damper units on R/C cars. Maintains constant viscosity through a wide temperature range.  Medium Set: Green #500 Blue #600 Purple #700 3 digit number show the viscosity of the oil (water viscosity is #1). The higher the humber, the higher the viscosity.

149,-

KJØP
Hovedbilde Tamiya 53445 Silicone Damper Oil Hard Set
Tamiya 53445 Silicone Damper Oil Hard Set
Art.nr: 53445
Copied
Developed for oil-filled damper units on R/C cars. Maintains constant viscosity through a wide temperature range.  Hard Set: For race-tuned cars, rough surfaced circuits, etc Pink #800 Clear #900 Light Blue #1000 3 digit number show the viscosity of the oil (water viscosity is #1). The higher the number, the higher the viscosity.

149,-

KJØP
Hovedbilde Tamiya 53451 TA-04 Front Oneway Joint Set Tamiya
Tamiya 53451 TA-04 Front Oneway Joint Set Tamiya
Art.nr: 53451
Copied
Tamiya 53451 TA-04 Front Oneway Joint Set Tamiya  Two differential cups for TA-04, TA-05, TB Evo, TB-03, TRF414M, TRF415 chassis.

219,-

KJØP
Hovedbilde Tamiya 53569 Clamp Type Aluminum Wheel Hub 6mm
Tamiya 53569 Clamp Type Aluminum Wheel Hub 6mm
Art.nr: 53569
Copied
These are Clamp Type 6mm Aluminum Wheel Hubs by Tamiya.  Fits TA04, TA03, TL-01 and F201 chassis cars.     FEATURES Plain silver aluminum construction (all parts).  High round cap head screws with a hexagon socket drive insert.  These wheel hubs are fastened with cap screws and prevent the 2x10mm  shaft from falling out as well as realize precise wheel attachment.  Illustrated reference guide.   INCLUDES (4) Wheel Hubs  (5) Shafts  (5) Cap Screws  (1) 1.5mm Hex Wrench   SPECIFICATIONS Wheel Hubs - Cap Screws -  Thickness: 6mm Diameter: 1.6mm  Inner Diameter: 2.5mm Length: 4mm  Outer Diameter: 12mm  Shaft Size -  Length: 10mm  Diameter: 2mm

269,-

KJØP
Hovedbilde Tamiya 53690 0.4 Pinion Gear (30T, 31T)
Tamiya 53690 0.4 Pinion Gear (30T, 31T)
Art.nr: 53690
Copied
0.4 Pinion Gear (30T, 31T)

169,-

KJØP
Hovedbilde TAMIYA 53691 0.4 PINION GEAR (32T, 33T)
TAMIYA 53691 0.4 PINION GEAR (32T, 33T)
Art.nr: 53691
Copied
0.4 Pinion Gear (32T, 33T) Highly efficient 0.4 module pinion gears. Transmits motor power to spur gear with minimal power loss.

179,-

KJØP
Hovedbilde Tamiya 53790 Cup Joint For Univ. Shaft
Tamiya 53790 Cup Joint For Univ. Shaft
Art.nr: 53790
Copied
Cup Joint For Univ. Shaft

149,-

KJØP
Hovedbilde Tamiya 53913 Frog 2005 Alu Wheel Adapter
Tamiya 53913 Frog 2005 Alu Wheel Adapter
Art.nr: 53913
Copied
FROG 2005 ALU WHEEL ADAPTER   Passer disse: Lunch Box Midnight Pumpkin FAV Wild ONe Frog Hornet Monster beetle Mud Blaster Grasshopper SRB Sand Scorcher Fighting Buggy 2014 Buggy Champ Super Champ Blackfoot Subaru Brat

149,-

KJØP
Hovedbilde Tamiya 53969 Hex Head Ball Connector 5x8mm
Tamiya 53969 Hex Head Ball Connector 5x8mm
Art.nr: 53969
Copied
These are 5x8mm Hard Hex Head Ball Head Connectors from Tamyia. FEATURES: High strength steel construction, black in color           Replaces worn or damaged ball connectors INCLUDES: Five 5x8 hard hex head ball head connectors REQUIRES: A 5mm wrench to install SPECS:    Length: 14mm overall           Diameter: 5mm ball           Thread length: 8mm           Thread diameter: 3mm COMMENTS: These are use in a wide variety of R/C vehicle applications

129,-

KJØP
Hovedbilde Tamiya 53984 Buggy Racing Wing
Tamiya 53984 Buggy Racing Wing
Art.nr: 53984
Copied
Fra produsenten: ★This polycarbonate wing can be cut as you like, letting you tailor it to your desired buggy setup. Compatible Chassis DB01, DB02, DF-03, TRF201XMW, TRF211XM & TRF502X Chassis*The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.

109,-

KJØP
Viser 26 til 50 (av 78 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png