Hopp til innhold

Stampede XL-5

 
Art.nr: 70662
Copied
These are the optional RPM Wide Front A-Arms  for the Traxxas Electric Rustler and 2WD Stampede.     FEATURES Composite nylon construction  Widens front wheel stance by almost 1-1/4" (31.8mm) for greater  stability  Wide front A-arms extend the front width by exactly the difference  in offset between the front and rear wheels   INCLUDES Left and Right Wide Front A-Arms with Instruction Sheet   REQUIREMENTS Longer turnbuckle and camber links;  Rustler XL-5: RPM Screw Kit   Traxxas Long Camber Links   Traxxas Long Toe Links  Stampede XL-5: RPM Screw Kit   Traxxas Long Camber Links   Traxxas Long Toe Links   Rustler VXL: RPM Screw Kit   Traxxas Long Camber Links   Traxxas Long Toe Links   Stampede VXL: Traxxas Long Toe Links One pair of front wheels, used to replace rear wheels, for proper  alignment

199,-

På lager 1
KJØP
Art.nr: 70680
Copied
This is the Screw Kit for the Rustler and Stampede 2WD  Wide Front A-Arms from RPM.     FEATURES Use with XL-5 versions  Easy and inexpensive option for bolting camber links (not  included) and tie rods (not included) to your electric Rustler  XL-5 or electric Stampede 2wd XL-5 when installing RPM Wide Front  A-arm kits   INCLUDES 4 M3 x 14mm button-head screws  4 M3 x 16mm button-head screws  2 M3 locknuts

39,-

På lager 2
KJØP
Art.nr: 70832
Copied
RPM Rear Bumper for Stampede 2WD - Black Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Quick Notes: Works with or without a Wheelie Bar (not included) Scale rear end protection unmatched by anything else available Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Integrated 5mm LED sockets for lights! (LED’s not included) Finally, a rear bumper for the Traxxas Stampede 2wd is now available that combines awesome scale looks with performance that works! Our new rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas #3678 – not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it’ll adapt and allow either configuration. Our rear bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today’s top full-scale bumper manufacturers. We start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3” square openings for 5mm LEDs. That’s right, our bumper allows you to install your favorite 5mm LEDs (not included) to be used as taillights, reverse lights or any other use you can imagine! The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM #80902 or #80905 – not included), the protection for the motor becomes nearly indestructible! Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage. Tech Notes: RPM Rear Bumpers for the Traxxas Stampede 2wd require a bumper mount (either a Traxxas #3677, RPM #80902 or RPM #80905 – not included) or a Wheelie Bar (Traxxas #3678 – not included) to install the RPM Rear Bumper. Some body trimming may be necessary to clear the bumper supports at lower body height settings. Tested and guaranteed to work with Traxxas #3617, #3617R & #3617X bodies with minimal trimming required. Other bodies may require additional trimming beyond what is mentioned in the instructions supplied. Any standard sized, round 5mm LED’s (not included) will work with RPM bumpers.

129,-

På lager 1
KJØP
Art.nr: 70835
Copied
RPM Rear Bumper for Stampede 2WD - Blue Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Quick Notes: Works with or without a Wheelie Bar (not included) Scale rear end protection unmatched by anything else available Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Integrated 5mm LED sockets for lights! (LED’s not included) Finally, a rear bumper for the Traxxas Stampede 2wd is now available that combines awesome scale looks with performance that works! Our new rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas #3678 – not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it’ll adapt and allow either configuration. Our rear bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today’s top full-scale bumper manufacturers. We start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3” square openings for 5mm LEDs. That’s right, our bumper allows you to install your favorite 5mm LEDs (not included) to be used as taillights, reverse lights or any other use you can imagine! The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM #80902 or #80905 – not included), the protection for the motor becomes nearly indestructible! Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage. Tech Notes: RPM Rear Bumpers for the Traxxas Stampede 2wd require a bumper mount (either a Traxxas #3677, RPM #80902 or RPM #80905 – not included) or a Wheelie Bar (Traxxas #3678 – not included) to install the RPM Rear Bumper. Some body trimming may be necessary to clear the bumper supports at lower body height settings. Tested and guaranteed to work with Traxxas #3617, #3617R & #3617X bodies with minimal trimming required. Other bodies may require additional trimming beyond what is mentioned in the instructions supplied. Any standard sized, round 5mm LED’s (not included) will work with RPM bumpers.

129,-

På lager 1
KJØP
Art.nr: 73272
Copied
ESC Cage for the Castle Sidewinder 3 & Sidewinder SCT Quick Notes: – works with Castle Sidewinder ESCs #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00 – fits the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally – also fits the Stampede 2wd, Rustler & Bandit – see “Tech Notes” below Quick Links: – available in Black & Blue Description The RPM ESC Cage for both the Castle Sidewinder 3 & Sidewinder SCT ESCs fits in the stock location on the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally, while also working on other Traxxas 1/10th scale vehicles as well (see “Tech Notes” below). Our cage allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan free to do its job. Furthermore, we left air channels along the sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool. Each ESC Cage is designed to simplify ESC installation and maintenance of the vehicle. Two screws hold the entire assembly to the chassis, that’s it! No more struggling with gooey double-sided tape to remove the ESC to clean your vehicle or transfer the electronics to another car. It’s so quick, you can transfer the entire assembly from one vehicle to the next in about a minute! We include a separate, encased on / off switch mount that bolts directly to our cage in one of four locations / orientations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Alternately, you can mount the switch anywhere you’d like simply by drilling and tapping two 2mm holes. Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons for a lifetime of worry-free performance. Each cage is molded in blue or black and backed by our limited lifetime warranty against breakage. Tech Notes:  The RPM ESC Cage for the Sidewinder 3 & Sidewinder SCT series ESCs works with Castle Sidewinder #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00. While our ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – Stampede 4×4, Slash 4×4, Slash 4×4 LCG, Slash 2wd, Slash 2wd LCG, Rally, Stampede VXL 2wd, Rustler VXL & Bandit VXL. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate is used – Rustler XL-5, Stampede XL-5 2wd, Craniac, Skully & Bandit XL-5.

99,-

På lager 2
KJØP
Art.nr: 73482
Copied
RPM ESC Cage for the Traxxas XL-5 & XL-10 – fits the Stampede 4×4, Slash 4×4, Slash 2wd & Rally - Black Quick Notes: Fits Traxxas XL-5 ESC’s (Traxxas #3018, #3018R & #3018X) Fits Traxxas XL-10 ESC’s (Traxxas #3016) Works even if one or both of the stock ESC mounting tabs are broken off The RPM ESC Cage for Traxxas XL-5 & XL-10 ESCs is the most effective, durable and best protection possible for your speed control. We eliminated the use of the two undersized mounting tabs on the ESC in favor of a complete cage system that solidly locks your XL-5 / XL-10 in place. By completely surrounding and capturing the XL-5 / XL-10 ESC, damage from broken tabs and ejection from the vehicle has been completely eliminated. The RPM XL-5 / XL-10 ESC Cage works perfectly even if one or both mounting tabs have already been broken or cut off! Now there is no reason to rely on unpredictable adhesives or zip ties to protect and retain your speed controller when our ESC Cage will lock it in place with 100% confidence each and every time! Tech Notes: RPM XL-5 & XL-10 ESC Cages are designed for the Traxxas XL-5 ESC (Traxxas #3018, #3018R & #3018X) and XL-10 (Traxxas #3016) only. While our ESC Cage will fit a variety of applications, they have been tested and only guaranteed to fit Traxxas vehicles that come with the XL-5 / XL-10 equipped as a stock ESC including the Slash 2WD, Stampede 2WD, Rustler 2WD, Bandit and 1/10 scale Rally.

109,-

På lager 4
KJØP
Art.nr: 73485
Copied
RPM ESC Cage for the Traxxas XL-5 & XL-10 – fits the Stampede 4×4, Slash 4×4, Slash 2wd & Rally - Blue Quick Notes: Fits Traxxas XL-5 ESC’s (Traxxas #3018, #3018R & #3018X) Fits Traxxas XL-10 ESC’s (Traxxas #3016) Works even if one or both of the stock ESC mounting tabs are broken off The RPM ESC Cage for Traxxas XL-5 & XL-10 ESCs is the most effective, durable and best protection possible for your speed control. We eliminated the use of the two undersized mounting tabs on the ESC in favor of a complete cage system that solidly locks your XL-5 / XL-10 in place. By completely surrounding and capturing the XL-5 / XL-10 ESC, damage from broken tabs and ejection from the vehicle has been completely eliminated. The RPM XL-5 / XL-10 ESC Cage works perfectly even if one or both mounting tabs have already been broken or cut off! Now there is no reason to rely on unpredictable adhesives or zip ties to protect and retain your speed controller when our ESC Cage will lock it in place with 100% confidence each and every time! Each RPM ESC Cage is made from our incredibly strong, ultra lightweight blend of engineering grade nylons and factory-backed by our industry-leading limited lifetime warranty. RPM molded products are made with pride in the USA! Tech Notes: RPM XL-5 & XL-10 ESC Cages are designed for the Traxxas XL-5 ESC (Traxxas #3018, #3018R & #3018X) and XL-10 (Traxxas #3016) only. While our ESC Cage will fit a variety of applications, they have been tested and only guaranteed to fit Traxxas vehicles that come with the XL-5 / XL-10 equipped as a stock ESC including the Slash 2WD, Stampede 2WD, Rustler 2WD, Bandit and 1/10 scale Rally.

149,-

På lager 2
KJØP
Art.nr: 73592
Copied
Caster Blocks & Spindle Blocks for the Slash 4×4, Rustler 4×4, Stampede 4×4, Hoss 4×4, Rally & Telluride Quick Notes: – fits the Slash 4×4, Slash 4×4 LCG Kits, Rustler 4×4, Stampede 4×4, Hoss 4×4 & the Rally 4wd – replaces stock Traxxas #6832, #6832X, #6837 & #6837X – not interchangeable with stock or aftermarket steering blocks / caster blocks Description Since the release of the first Slash 4×4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the call with our Caster & Steering Blocks for these awesome trucks. We started with a blank slate, drew in the necessary design elements and built an all-new design with a focus on punishment survivability. The core design of our caster blocks revolve around the lower-case “H” structure which provides extreme rigidity to keep camber and caster setting locked in place while running normally, yet our materials provide serious impact absorption characteristics to prevent breakage when those “oops” moments inevitably arise. RPM steering blocks have also been reengineered for durability, strength, rigidity and crash-survivability. More material surrounds the kingpin posts while smoother flowing turnbuckle arms assure consistent feel and performance from the steering system. Our Slash 4×4 / Stampede 4×4 / Rustler 4×4 / Hoss 4×4 front-end components are made from our trademark blend of indestructible materials and come factory backed by our limited lifetime warranty for strength and durability you know you can trust! Tech Notes:  RPM caster blocks and steering blocks for the Slash 4×4, Rustler 4×4, Stampede 4×4, Hoss 4×4, Rally & Telluride are sold as a set, including 2 caster blocks and 2 spindle blocks. These parts are not interchangeable with stock or aftermarket steering blocks / caster blocks.   

269,-

299,-

På lager 2
KJØP
-10%
Art.nr: 73612
Copied
Gearbox Housing and Rear Mounts for the Traxxas Slash 2wd, e-Rustler, e-Stampede & Bandit Quick Notes: – fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd – replaces stock Traxxas #3691 & #3691A – hybrid nylon / aluminum for a lightweight, yet strong gearbox – intuitive mounting system allows individual removal of the gearbox or A-arm mounts – matching Gear Cover also available – replacement Rear Mounts available Description The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2wd vehicles is designed to solve a multitude of issues with stock and other aftermarket transmission housings. Our gearbox housing and mounts are a blend of aluminum and molded nylon parts for the perfect combination of strength, durability and heat dissipation. Check out this awesome list of included features: Aluminum Motor Plate: Manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability. Locks in gear mesh for worry-free pinion to spur settings, eliminating fears of exploding spur and pinion gears from an overheated stock transmission case. Offers significant motor heat dissipation for cooler motor temperatures, unlike stock plastic motor plates that insulate the motor. Not integrated with the rear bumper mounts, meaning rear impacts will not bend the motor plate, (when used with a rear bumper or bumper mounting system such as RPM #80902 or #80905). Molded Gearbox Housings: Molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Retains stock bumper mounting holes for positive, solid support of any bumper or wheelie bars you may choose. Retains a stock “cover” for the motor, adding motor protection where most aftermarket housings leave the motor completely exposed to rear impacts. We modified our housing to eliminate the huge bottom hole in the stock housing, keeping your internal gears cleaner longer. Quiet! With a completely enclosed gearbox housing, you’ll no longer have the loudest transmission on the track. Redesigned exterior features are smoother; making it less likely dirt will adhere or build up on the case. Separate housing and rear mounts means transmission maintenance won’t affect suspension settings. Molded Rear Mounts (0° & 3° Rear Mounts Included) Separate from the gearbox housing and easy to access. Each mount is individually accessible and removable without removing the transmission or vice versa. Simply unbolt 2 screws (and a hinge pin) to remove an A-arm mount or 6 screws to remove the transmission! Sold with two sets of rear mounts in each package – 0° and 3° rear mounts are included. Molded from the RPM blend of ultra durable, long lasting, bulletproof nylons. Molded mounts means tighter tolerances and less slop than with machined components for better camber and toe angle retention. Each RPM Gearbox Housing kit is available in black, green or blue and comes will all necessary mounting hardware and instructions. Whether racing or bashing, the RPM Gearbox Housing is one of the least expensive yet most valuable options you can buy! Every RPM Gearbox Housing kit is proudly designed and manufactured in the USA! Get yours today! Tech Notes: RPM Gearbox Housings do not include internal components (gears bearings, shafts, etc.). Internal components (either stock or aftermarket) must be transferred to the RPM Gearbox Housing from the stock Traxxas transmission. RPM Gearbox Housings replace stock Traxxas #3691 (or #3691A). Due to the amount of strengthening material we added to the rear mounts, some modification of stock a-arms may be needed to allow free suspension movement. This slight interference issue is nonexistent when used with RPM rear a-arms. Slash 2wd LCG Chassis Notes: The Traxxas Slash LCG Chassis is slightly longer than the standard chassis so some modification of the back end may be necessary. A 45° chamfer, a radius or shortening the chassis by a small amount corrects the issue.

399,-

449,-

På lager 2
KJØP
-11%
Art.nr: 73752
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

179,-

** Ikke på lager
KJØP
Art.nr: 73754
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

På lager 3
KJØP
-11%
Art.nr: 73755
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description: One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes:  RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

169,-

** Ikke på lager
KJØP
Art.nr: 73759
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

159,-

** Ikke på lager
KJØP
Art.nr: 73762
Copied
ESC Cage for the Castle Mamba X ESC (fits most Traxxas 1:10 scale vehicles) Quick Notes: – works with Castle Mamba X ESCs #010-0155-00, #010-0155-01, #010-0155-02, #010-0155-03, #010-0155-04, #010-0160-00, #010-0160-01, #010-0161-00 & #010-0161-01 – fits the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally – also fits the Stampede 2wd, Rustler & Bandit – see “Tech Notes” below Description Our ESC Cage for the Castle Mamba X ESC provides a solid, positive mount to keep your new, and valuable ESC in place even under the most extreme circumstances. It also allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan free to do its job. Furthermore, we left air channels along both sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool. Each RPM ESC Cage is designed to simplify ESC installation and maintenance of the vehicle. Two screws hold the entire assembly to the chassis, that’s it! No more struggling with gooey double-sided tape to remove the ESC to clean your vehicle or transfer the electronics to another car. It’s so easy that you can transfer the entire assembly from one vehicle to the next in about a minute! The two mounting screws can actually be accessed without removing the top from the base making this one of the easiest ESC Cages we manufacture to remove and install. We include a separate, encased on / off switch mount that bolts directly to our cage in one of four locations / orientations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Our ESC Cage for the Castle Mamba X ESC fits in the stock location on the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally, while also working on other Traxxas 1/10th scale vehicles as well (see “Tech Notes” below). Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons and backed by our limited lifetime warranty against breakage. Don’t trust your investment to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a name you’ve known for decades for bulletproof protection – RPM! Tech Notes: The RPM ESC Cage for the Mamba X series ESCs works with #010-0155-00, #010-0155-01, #010-0155-02, #010-0155-03, #010-0155-04, #010-0160-00, #010-0160-01, #010-0161-00 & #010-0161-01. While our ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – Stampede 4×4, Slash 4×4, Slash 4×4 LCG, Slash 2wd, Slash 2wd LCG, & Rally. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate (stock item on VXL models) is used – Rustler, Stampede 2wd & Bandit.

169,-

** Ikke på lager
KJØP
Art.nr: 80182
Copied
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Black Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

På lager 1
KJØP
-12%
Art.nr: 80184
Copied
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Green Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

På lager 1
KJØP
-12%
Art.nr: 80185
Copied
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Blue Replaces stock Traxxas #3655 & 3655X Quick Notes:   Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.  

149,-

169,-

På lager 1
KJØP
-12%
Art.nr: 80187
Copied
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Pink Replaces stock Traxxas #3655 & 3655X  Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

På lager 2
KJØP
-12%
Art.nr: 80189
Copied
RPM Rear Suspension Arms for Rustler & Stampede (2WD) - Red Replaces stock Traxxas #3655 & 3655X Quick Notes: Fits 2WD versions of the electric Stampede & Rustler Each A-arm is 7 grams lighter than stock! Eliminates over 0.03” (0.8mm) of slop from the inner arm mount Replaces stock Traxxas #3655 & 3655X RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs – 1 left rear and 1 right rear per package.

149,-

169,-

** Ikke på lager
KJØP
-12%
Art.nr: 80242
Copied
        RPM Front Arms for the 2WD: Slash, Nitro Slash, Rustler & Stampede - Black Replaces stock Traxxas #3631 Quick Notes: Fits all versions of the Traxxas 2WD: Slash, Nitro Slash, Stampede & Rustler Nearly 25% lighter than stock Replaces stock Traxxas #3631 RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for a superior ride and stability over the roughest tracks and terrain.

149,-

På lager 1
KJØP
Art.nr: 80245
Copied
RPM Front Arms for the 2WD: Slash, Nitro Slash, Rustler & Stampede - Blue Replaces stock Traxxas #3631 Quick Notes: Fits all versions of the Traxxas 2WD: Slash, Nitro Slash, Stampede & Rustler Nearly 25% lighter than stock Replaces stock Traxxas #3631 RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for a superior ride and stability over the roughest tracks and terrain.

109,-

På lager 3
KJØP
Art.nr: 80247
Copied
RPM Front Arms for the 2WD: Slash, Nitro Slash, Rustler & Stampede - Pink Replaces stock Traxxas #3631   Quick Notes: Fits all versions of the Traxxas 2WD: Slash, Nitro Slash, Stampede & Rustler Nearly 25% lighter than stock Replaces stock Traxxas #3631 RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for a superior ride and stability over the roughest tracks and terrain.

139,-

På lager 1
KJØP
Art.nr: 80372
Copied
RPM Front Bearing Carriers for 2WD Slash, Nitro Slash, Stampede & Rustler - Black Replaces stock Traxxas #3736 Quick Links: Fits Traxxas 2WD Slash, Nitro Slash, Rustler, Stampede & Bandit VXL Replaces stock Traxxas #3736 5x11x4mm. bearings not included Optional matching Rear Bearing Carriers are also available Optional matching Caster Blocks are also available RPM bearing carriers are the perfect solution for a nearly indestructible front axle carrier to handle your toughest race or bash session. Our bearing carriers are so strong; we guarantee that they won’t ever break! Molded in black or blue from our trademark blend of engineering grade nylons. When used in conjunction with our Rear Bearing Carriers, you’ll never have to worry about damaged bearing carriers again! Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

129,-

På lager 1
KJØP
Art.nr: 80375
Copied
RPM Front Bearing Carriers for 2WD Slash, Nitro Slash, Stampede & Rustler - Blue Replaces stock Traxxas #3736 Quick Links: Fits Traxxas 2WD Slash, Nitro Slash, Rustler, Stampede & Bandit VXL Replaces stock Traxxas #3736 5x11x4mm. bearings not included Optional matching Rear Bearing Carriers are also available Optional matching Caster Blocks are also available RPM bearing carriers are the perfect solution for a nearly indestructible front axle carrier to handle your toughest race or bash session. Our bearing carriers are so strong; we guarantee that they won’t ever break! Molded in black or blue from our trademark blend of engineering grade nylons. When used in conjunction with our Rear Bearing Carriers, you’ll never have to worry about damaged bearing carriers again! Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

129,-

På lager 1
KJØP
Art.nr: 80382
Copied
RPM Rear Bearing Carriers for 2WD Slash, Nitro Slash, Stampede, Rustler & Bandit - Black Replaces stock Traxxas #3752 Quick Notes: Fits the Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces stock Traxxas #3752 5x11x4mm. bearings not included Not for use on 4×4 versions of the Rustler, Stampede or Slash Identical in strength and performance as our Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not break! Molded in black or blue. Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings (not included). Later moels use a 5x11x4mm bearing as a stock size and can be directly transferred to RPM versions. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

129,-

139,-

På lager 1
KJØP
-7%
Art.nr: 80385
Copied
RPM Rear Bearing Carriers for 2WD Slash, Nitro Slash, Stampede, Rustler & Bandit - Blue Replaces stock Traxxas #3752 Quick Notes: Fits the Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces stock Traxxas #3752 5x11x4mm. bearings not included Not for use on 4×4 versions of the Rustler, Stampede or Slash Identical in strength and performance as our Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not break! Molded in black or blue. Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings (not included). Later moels use a 5x11x4mm bearing as a stock size and can be directly transferred to RPM versions. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

89,-

På lager 2
KJØP
Art.nr: 80522
Copied
RPM Gear Cover for 2WD Rustler, Stampede, Bandit & Slash - Black Replaces the stock Traxxas #3792 Quick Notes: Fits all versions of the Traxxas 2WD Rustler, Stampede, Bandit & Slash Not recommended for spur gears larger than the stock 87 teeth Replaces the stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required.   Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues. Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

Ikke på lager
Ikke på lager
Art.nr: 80524
Copied
RPM Gear Cover for 2WD Rustler, Stampede, Bandit & Slash - Green Replaces the stock Traxxas #3792 Quick Notes: Fits all versions of the Traxxas 2WD Rustler, Stampede, Bandit & Slash Not recommended for spur gears larger than the stock 87 teeth Replaces the stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required. Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues. Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

På lager 2
KJØP
Art.nr: 80525
Copied
RPM Gear Cover for 2WD Rustler, Stampede, Bandit & Slash - Blue Replaces the stock Traxxas #3792 Quick Notes: Fits all versions of the Traxxas 2WD Rustler, Stampede, Bandit & Slash Not recommended for spur gears larger than the stock 87 teeth Replaces the stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required. Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues. Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

** Ikke på lager
KJØP
Art.nr: 80527
Copied
RPM Gear Cover for 2WD Rustler, Stampede, Bandit & Slash - Pink Replaces the stock Traxxas #3792 Quick Notes: Fits all versions of the Traxxas 2WD Rustler, Stampede, Bandit & Slash Not recommended for spur gears larger than the stock 87 teeth Replaces the stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required. Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues. Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

** Ikke på lager
KJØP
Art.nr: 80529
Copied
Gear Cover for the Traxxas e-Rustler, e-Stampede 2wd, Bandit & Slash 2wd replaces stock Traxxas #3792 Quick Notes: – fits all versions of the Traxxas electric Rustler, electric Stampede 2wd, Bandit & Slash 2wd – not recommended for spur gears larger than the stock 87 teeth – replaces stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required.   Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

** Ikke på lager
KJØP
Art.nr: 80712
Copied
RPM Caster Blocks for 2WD Slash, Nitro Slash, Stampede & Rustler - Black Replaces Traxxas stock #3632 Quick Notes: Replaces Traxxas stock #3632 Will not work on nitro versions of the Rustler & Stampede Will not work on 4WD versions of the Stampede, Rustler or Slash RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash, electric Rustler & electric Stampede 2wd are the final link for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle. RPM Caster Blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block. Tech Notes: RPM #80712 & #80715 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede nor 4wd versions of the Stampede, Rustler or Slash.

149,-

Ikke på lager
Ikke på lager
Art.nr: 80832
Copied
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
Ikke på lager
Art.nr: 80852
Copied
RPM Front Shock Tower for 2WD Slash, Stampede, Rustler & Bandit Replaces stock Traxxas #3639 Quick Notes: Replaces stock Traxxas #3639 Optional Rear Shock Tower is also available RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this vital suspension component. Our design uses an I-beam structure that adds tremendous levels of strength and rigidity that is far superior to u-shaped or flat designs. Our front shock towers will not flex nearly as easily as the stock versions yet have enough give in them, which prevents breakage from hard impacts or crashes. RPM shock towers are molded in black and are made from our well-reputed blend of materials. These shock towers are so strong; we back them for life with our world renowned warranty policy against breakage.

99,-

På lager 2
KJØP
Art.nr: 80902
Copied
Mount for Rear Bumper or Wheelie Bar for the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit replaces Traxxas stock #3677 Quick Notes: – fits the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit – replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

På lager 2
KJØP
Art.nr: 80905
Copied
RPM Mount for Rear Bumper or Wheelie Bar for 2WD Slash, Rustler, Stampede & Bandit - Blue Replaces Traxxas stock #3677 Quick Notes: Fits Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

På lager 2
KJØP
Art.nr: 80912
Copied
RPM Motor Protector for 2WD Rustler, Stampede, Bandit & Slash* - Black Quick Notes: Transmission mounts are sold separately Fits Traxxas 2WD Bandit, Rustler & Stampede Also fits 2WD Slash - please see “Tips” below for important information Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. Our new rear Motor Protector eliminates that problem! How did we solve it? We started with an RPM rear bumper mount / wheelie bar mount (RPM #80902 or #80905) and extended the reach with this simple add-on piece, which completely blocks the motor from most rear impacts. A stock Traxxas rear bumper mount / wheelie bar mount – Traxxas #3677 – can be used with this motor protector as well. Traxxas Slash owners running in the unlimited class or those that simply want to drop a huge amount of rear end weight can eliminate the stock rear bumper and mount the RPM Motor Protector in place of the stock bumper to prevent damage to the end-bell and motor. For the ultimate in rear end protection, a second motor protector can be bolted to the opposite side of the rear bumper mount / wheelie bar mount (gear cover side) to help protect the gears and gear cover from extreme rear-end impacts. The RPM motor protector can be used on any vehicle that can run the Traxxas #3677 rear bumper mount / wheelie bar mount including the Bandit, e-Stampede, e-Rustler & Slash as well as a number of Traxxas legacy models. Our Motor Protector is molded from our ultra-durable blend of nylons and is backed by our limited lifetime warranty. Tech Notes: Images show both the motor protector and transmission mount (sold separately). To use the RPM Motor Protector in conjunction with a Slash 2wd rear bumper or Traxxas wheelie bar, please see “Tips” below. With included hardware, it must be used in place of either the bumper or wheelie bar. A Traxxas rear bumper mount / wheelie bar mount (Traxxas #3677) or an RPM rear bumper / wheelie bar mount (RPM #80902 or #80905) must be installed prior to installing the RPM Motor Protector (not included). Slash Tips: Thanks to RPM customer Reed S. for this tip on how to use our Motor Protector in conjunction with a stock Slash 2wd rear bumper. Using the spacers shown in the photo of the parts tree below, slip the spacers in place of the stock shoulder crews that attach the stock bumper to the mount, then use 2 – M3 x 20mm Cap Screws (not included) in place of the the RPM mounting screws that come supplied with the RPM Motor Protector.

89,-

På lager 2
KJØP
Art.nr: 80915
Copied
RPM Motor Protector for 2WD Rustler, Stampede, Bandit & Slash* - Blue Quick Notes: Transmission mounts are sold separately Fits Traxxas 2WD Bandit, Rustler & Stampede Also fits 2WD Slash - please see “Tips” below for important information Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. Our new rear Motor Protector eliminates that problem! How did we solve it? We started with an RPM rear bumper mount / wheelie bar mount (RPM #80902 or #80905) and extended the reach with this simple add-on piece, which completely blocks the motor from most rear impacts. A stock Traxxas rear bumper mount / wheelie bar mount – Traxxas #3677 – can be used with this motor protector as well. Traxxas Slash owners running in the unlimited class or those that simply want to drop a huge amount of rear end weight can eliminate the stock rear bumper and mount the RPM Motor Protector in place of the stock bumper to prevent damage to the end-bell and motor. For the ultimate in rear end protection, a second motor protector can be bolted to the opposite side of the rear bumper mount / wheelie bar mount (gear cover side) to help protect the gears and gear cover from extreme rear-end impacts. The RPM motor protector can be used on any vehicle that can run the Traxxas #3677 rear bumper mount / wheelie bar mount including the Bandit, e-Stampede, e-Rustler & Slash as well as a number of Traxxas legacy models. Our Motor Protector is molded from our ultra-durable blend of nylons and is backed by our limited lifetime warranty. Tech Notes: Images show both the motor protector and transmission mount (sold separately). To use the RPM Motor Protector in conjunction with a Slash 2wd rear bumper or Traxxas wheelie bar, please see “Tips” below. With included hardware, it must be used in place of either the bumper or wheelie bar. A Traxxas rear bumper mount / wheelie bar mount (Traxxas #3677) or an RPM rear bumper / wheelie bar mount (RPM #80902 or #80905) must be installed prior to installing the RPM Motor Protector (not included). Slash Tips: Thanks to RPM customer Reed S. for this tip on how to use our Motor Protector in conjunction with a stock Slash 2wd rear bumper. Using the spacers shown in the photo of the parts tree below, slip the spacers in place of the stock shoulder crews that attach the stock bumper to the mount, then use 2 – M3 x 20mm Cap Screws (not included) in place of the the RPM mounting screws that come supplied with the RPM Motor Protector.

69,-

Ikke på lager
Ikke på lager
Art.nr: 81162
Copied
RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Black Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

Ikke på lager
Ikke på lager
Art.nr: 81165
Copied
RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Blue Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

På lager 3
KJØP
Art.nr: 81262
Copied
RPM Heavy Duty Camber Links for 2WD Rustler & Stampede - Black Replaces stock Traxxas #3641 & 3641A Quick Notes: For use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links Replaces stock Traxxas #3641 & 3641A RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so you won’t ever have to replace another one. They are molded in black, green, blue or red from our killer blend of nylons and are sold in a set of four, two front links and two rear links, enough for your entire vehicle. Get a set and end the frustration of broken camber links! Tech Notes: Designed for use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links. If your truck comes with adjustable turnbuckles, please consider our rod ends for Traxxas vehicles instead. Replaces stock Traxxas #3641 & 3641A.

79,-

På lager 1
KJØP
Art.nr: 81264
Copied
RPM Heavy Duty Camber Links for 2WD Rustler & Stampede - Green Replaces stock Traxxas #3641 & 3641A Quick Notes: For use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links Replaces stock Traxxas #3641 & 3641A RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so you won’t ever have to replace another one. They are molded in black, green, blue or red from our killer blend of nylons and are sold in a set of four, two front links and two rear links, enough for your entire vehicle. Get a set and end the frustration of broken camber links! Tech Notes: Designed for use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links. If your truck comes with adjustable turnbuckles, please consider our rod ends for Traxxas vehicles instead. Replaces stock Traxxas #3641 & 3641A.

69,-

** Ikke på lager
KJØP
Art.nr: 81265
Copied
RPM Heavy Duty Camber Links for 2WD Rustler & Stampede - Blue Replaces stock Traxxas #3641 & 3641A    Quick Notes: For use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links Replaces stock Traxxas #3641 & 3641A RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so you won’t ever have to replace another one. They are molded in black, green, blue or red from our killer blend of nylons and are sold in a set of four, two front links and two rear links, enough for your entire vehicle. Get a set and end the frustration of broken camber links! Tech Notes: Designed for use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links. If your truck comes with adjustable turnbuckles, please consider our rod ends for Traxxas vehicles instead. Replaces stock Traxxas #3641 & 3641A.

79,-

På lager 2
KJØP
Art.nr: 81269
Copied
RPM Heavy Duty Camber Links for 2WD Rustler & Stampede - Red Replaces stock Traxxas #3641 & 3641A Quick Notes: For use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links Replaces stock Traxxas #3641 & 3641A RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so you won’t ever have to replace another one. They are molded in black, green, blue or red from our killer blend of nylons and are sold in a set of four, two front links and two rear links, enough for your entire vehicle. Get a set and end the frustration of broken camber links! Tech Notes: Designed for use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links. If your truck comes with adjustable turnbuckles, please consider our rod ends for Traxxas vehicles instead. Replaces stock Traxxas #3641 & 3641A.

69,-

** Ikke på lager
KJØP
Art.nr: 82053
Copied
Revolver Rear Wheels (for the Traxxas Electric Rustler & Electric Stampede 2wd) Quick Notes: – fits the Traxxas Electric Rustler [Rear] & Electric Stampede 2wd [Rear] – sold in pairs – tires not included Description Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance.

119,-

På lager 1
KJØP
Art.nr: 82063
Copied
Revolver Wheels (for the Traxxas Jato [Rr], Traxxas electric Rustler & electric Stampede 2wd [Ft], Traxxas nitro Rustler [Rr], Nitro Sport [Rr], nitro Stampede [Rr] & HPI RS4 MT [Ft or Rr]) Quick Notes: – fits the Traxxas Jato [Rear], Traxxas electric Rustler [Front], electric Stampede 2wd [Front], Traxxas nitro Rustler [Rear], Nitro Sport [Rear], nitro Stampede [Rear] & HPI RS4 MT [Front or Rear] – sold in pairs – tires not included Fits: Traxxas Jato [Rr]   Description Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance.

119,-

** Ikke på lager
KJØP
Art.nr: 73615
Copied
Gearbox Housing and Rear Mounts for the Traxxas Slash 2wd, e-Rustler, e-Stampede & Bandit Quick Notes: – fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd – replaces stock Traxxas #3691 & #3691A – hybrid nylon / aluminum for a lightweight, yet strong gearbox – intuitive mounting system allows individual removal of the gearbox or A-arm mounts – matching Gear Cover also available – replacement Rear Mounts available Description The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2wd vehicles is designed to solve a multitude of issues with stock and other aftermarket transmission housings. Our gearbox housing and mounts are a blend of aluminum and molded nylon parts for the perfect combination of strength, durability and heat dissipation. Check out this awesome list of included features: Aluminum Motor Plate: Manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability. Locks in gear mesh for worry-free pinion to spur settings, eliminating fears of exploding spur and pinion gears from an overheated stock transmission case. Offers significant motor heat dissipation for cooler motor temperatures, unlike stock plastic motor plates that insulate the motor. Not integrated with the rear bumper mounts, meaning rear impacts will not bend the motor plate, (when used with a rear bumper or bumper mounting system such as RPM #80902 or #80905). Molded Gearbox Housings: Molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Retains stock bumper mounting holes for positive, solid support of any bumper or wheelie bars you may choose. Retains a stock “cover” for the motor, adding motor protection where most aftermarket housings leave the motor completely exposed to rear impacts. We modified our housing to eliminate the huge bottom hole in the stock housing, keeping your internal gears cleaner longer. Quiet! With a completely enclosed gearbox housing, you’ll no longer have the loudest transmission on the track. Redesigned exterior features are smoother; making it less likely dirt will adhere or build up on the case. Separate housing and rear mounts means transmission maintenance won’t affect suspension settings. Molded Rear Mounts (0° & 3° Rear Mounts Included) Separate from the gearbox housing and easy to access. Each mount is individually accessible and removable without removing the transmission or vice versa. Simply unbolt 2 screws (and a hinge pin) to remove an A-arm mount or 6 screws to remove the transmission! Sold with two sets of rear mounts in each package – 0° and 3° rear mounts are included. Molded from the RPM blend of ultra durable, long lasting, bulletproof nylons. Molded mounts means tighter tolerances and less slop than with machined components for better camber and toe angle retention. Each RPM Gearbox Housing kit is available in black, green or blue and comes will all necessary mounting hardware and instructions. Whether racing or bashing, the RPM Gearbox Housing is one of the least expensive yet most valuable options you can buy! Every RPM Gearbox Housing kit is proudly designed and manufactured in the USA! Get yours today! Tech Notes:  RPM Gearbox Housings do not include internal components (gears bearings, shafts, etc.). Internal components (either stock or aftermarket) must be transferred to the RPM Gearbox Housing from the stock Traxxas transmission. RPM Gearbox Housings replace stock Traxxas #3691 (or #3691A). Due to the amount of strengthening material we added to the rear mounts, some modification of stock a-arms may be needed to allow free suspension movement. This slight interference issue is nonexistent when used with RPM rear a-arms. Slash 2wd LCG Chassis Notes: The Traxxas Slash LCG Chassis is slightly longer than the standard chassis so some modification of the back end may be necessary. A 45° chamfer, a radius or shortening the chassis by a small amount corrects the issue.

379,-

399,-

På lager 4
KJØP
-5%
Art.nr: 70665
Copied
Forklaring fra RPM Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. Our Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “Tech Notes” below) and bolt on a new set of rear wheels! It couldn’t be easier. You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited lifetime warranty against breakage. RPM durability combined with RPMaffordability; there’s no way you can go wrong! Tech Notes: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM Screw Kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede XL-5, Craniac & Skully: 1 – RPM Screw Kit #70680, 1 – Traxxas #3643 (long camber links), 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas #3643 (long camber links), 1 – Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

219,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png