Denne erstatter TRX 2531
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
"Bulk" Traxxas 2531X Suspension Arms Front (2)
These are the Replacement Front Suspension Arms for many Traxxas kits.
These are located on the front bulkhead and are held on by suspension pins.
FEATURES: Nylon construction
Black in color
INCLUDES: Two black nylon suspension arms
REQUIRES: Assembly onto kit.
SPECS: Length: 3"
Width: 1.2"
COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT,
and the Nitro Sport.
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
"Bulk" Traxxas 2437 Front Axles Bandit
This is a pair of Front Axles for the Traxxas Bandit Buggy Kit
and the Ready To Run version.
FEATURES: Constructed of steel.
INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run
Version
SPECS: Length: 0.94" (24mm)
Length of threaded area: 0.14" (3.5mm)
Thread size: 0.16" (4mm)
REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing
Stub Axle Pins TRX 2754.
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
"Bulk" Traxxas 3722A Lower Chassis Gray
This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit.
FEATURES: Constructed of composite plastic
INCLUDES: One Traxxas Grey Lower Chassis
REQUIRES: Installing all components onto chassis
SPECS: Length: 13.5" (343mm)
Width: 5.3" (135mm)
Thickness: 0.08" (2mm)
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
This is a Traxxas Grey Upper Chassis for the Traxxas Electric Rustler series.
FEATURES: Grey plastic construction
Molded in servo mount and bellcrank post
INCLUDES: One upper chassis
SPECS: Length: 4.94" (125mm)
Width: 2.91" ( 73mm)
Height: 1.25" ( 31mm)
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
"Bulk" Traxxas 3762A Ultra Shocks (2) Rear
Denne passer til:
-Bandit XL5/VXL bak.
-Rustler XL5/VXL bak.
-og til flere Traxxas biler. Sjekk manualen til din bil.
This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD.
INCLUDES: This is a complete assebled set taken out from a new bandit. It just need to be installed
COMMENTS: Two pairs are required if replacing all shocks.
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
"Bulk" Traxxas 3639 Shock Tower Front
This is a stock replacement FRONT shock tower for the Traxxas Stampede.
FEATURES:
Made from black molded nylon
For the Traxxas Stampede
SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"
INCLUDES:
(1) Front shock tower for the Traxxas Stampede
59,-
Kontakt oss for mer informasjon om dette produktet
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
"Bulk" Traxxas 3760A Ultra Shocks Gray Long (2)
Denne passer til:
-Bandit XL5/VXL foran.
-Rustler XL5/VXL foran.
-og til flere Traxxas biler. Sjekk manualen til din bil.
This is a pair of the Long Ultra Shocks from Traxxas
for the Bandit.
INCLUDES: This is assembled part and needs only to install on the car
COMMENTS: Two pairs are required if replacing all shocks.
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
This is a Dust Cover and Rubber Plug
for the Traxxas Rustler/Stampede
FEATURES: Made from black molded nylon
For the Traxxas Rustler/Stampede
INCLUDES: Dust cover for the Traxxa Rustler
3 x 6 mm round head coarse thread screws (to mount dust cover)
Rubber Plug
Specs: 3" (77mm)
Compatible with Traxxas Telemetry
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***
Disse lagerene er samme størrelse som Tamiya 1150
This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Cars.
FEATURES: Metal bearing construction
Blue rubber dirt shields
INCLUDES: (2) 5X11mm ball bearings, Part #5116
SPECS: Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)
39,-
55,-
Kontakt oss for mer informasjon om dette produktet