Hopp til innhold
Hjem / Batteri & lader / Batteri / NiMH / 4,8 Volt / Vapex Receiver battery NiMH 4,8V 2500mAh Flat

Vapex Receiver battery NiMH 4,8V 2500mAh Flat

Art.nr: VP2500AAS4F2

199,-

Vapex
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Vapex Instant-series of NiMH batteries with very low self-discharge level.

  • Battery: 4-cell (4.8V) NiMH AA 2500 mAh Receiver battery
  • Connector: Futaba
  • Length: 57 mm
  • Width: 53 mm
  • Height: 14.7 mm
  • Weight: 118 g

Produsent

Vapex

Kunder kjøpte også

Hovedbilde Futaba T6K-V3S Radio Mode-2 R3008SB T-FHSS Hovedbilde Futaba T6K-V3S Radio Mode-2 R3008SB T-FHSS
Futaba T6K-V3S Radio Mode-2 R3008SB T-FHSS
Futaba T6K-V3S Transmitter Mode-2 – 8-Channel Digital Proportional RC System - R3008SB MODE-2: This transmitter is Mode-2, with the throttle on the left hand stick and elevator on the right stick! T-FHSS AIR/S-FHSS 2.4 GHZ MULTI FUNCTION 8-CHANNEL TRANSMITTER: The Futaba 2.4 GHz T-FHSS Air system/S-FHSS system is employed. TELEMETRY SYSTEM (CAN’T BE USED IN CASE OF S-FHSS): A T-FHSS Air bidirectional communication system is used. The voltage of the battery mounted in the fuselage can be displayed at the transmitter during flight. Altitude, temperature, RPM, current, and voltage data can be displayed at the transmitter by installing various optional telemetry sensors in the fuselage. SPEECH FUNCTION (T-FHSS ONLY): Telemetry data can be listened to by plugging commercial earphones into the transmitter. BUILT-IN ANTENNA: Antenna built into the transmitter provides a simple appearance and improves handling ease. S.BUS/S.BUS2 SERVO SETTING FUNCTION: S.Bus/S.Bus2 servo channel and various functions can be set by connecting the servo to the transmitter. POWER-SAVING TYPE TRANSMITTER: Four AA’s alkaline batteries can be used. Alternate options: HT5F1800B (NiMH 6.0 V, 1800 mA) FT2F1700BV2 (lithium-ferrite 6.6 V, 1700 mA) FT2F2100BV2 (lithium-ferrite 6.6 V, 2100 mA) VIBRATION: A function that alerts the operator of various alarms by vibrating the transmitter can be selected. UNIQUE MODEL MEMORY SYSTEM: The transmitter body contains a 30 model memory. MIXING TYPE SELECTION: Fixed wing, helicopter, and glider mixing type can be selected to match the fuselage. In addition, 6 swash plate types can also be selected for helicopters. Multi-copter selection is also possible. DIGITAL TRIM: Rapid trimming during flight is possible. The sound changes at the center of trim. The step size can be arbitrarily changed. The trim position is displayed on the LCD. LEVER HEAD ADJUSTMENT: The lever head length can be adjusted. Lever head shape that reduces slip during operation has been adopted. SWITCH/VR POSITION CHANGE AND AUX CHANNEL FUNCTION CHANGE: Mixing and other switches and VR can be selected. Since the function of the AUX channels (CH5-CH8) can also be changed, original mixing, in addition to existing mixing, can be created by using the programmable mixing function. MODEL DATA TRANSFER FUNCTION: Model data can be wirelessly transferred between 6K. Updates from T6K -> T6K V3S: 8 channel receiver (R3008SB) is included Switch D is changed from 2 positons to 3 positons Glider functions strengthened (Added wing type 2AIL-B, Trim-mix for rudder, conditions increased from 3 to 4) Timer (Added 1 more time and having 2 timers) Helicopter function (Governor gain added) YOUR T6K-V3S INCLUDES: T6K-V3S Transmitter R3008SB Receiver Switch harness TRANSMITTER SPECS: TRANSMITTER FREQUENCY: 2.4 GHz band SYSTEM: T-FHSS Air, S-FHSS, switchable POWER SUPPLY: 6.0 V Dry battery FREQUENCY BAND: 2.4 GHz RF POWER OUTPUT: 100mW EIRP R3008SB RECEIVER SPECS: SIZE: 24.9 x 47.3 x 14.3 mm WEIGHT: 10.1 g RATED VOLTAGE: DC 4.8~7.4V OPERATING VOLTAGE: DC 4.0~8.4V

2.795,-

3.295,-

KJØP
-15%
Hovedbilde Power HD 6001MG Analog 7kg Hovedbilde Power HD 6001MG Analog 7kg
Power HD 6001MG Analog 7kg
Power HD 6001MG Analog 7kg   Metallgir. Kan brukes i både fly og bil. Weight: 56g Dimension: 40.7x20.5x39.5mm Supply voltage: 6.0V Stall Torque: 7kg.cm no load running Speed: 0.14sec/60° Storage Temperature: -20?~55? Dead band width: ?4us

239,-

249,-

KJØP
-4%
Hovedbilde Joysway DF95 Sail Winch Servo
Joysway DF95 Sail Winch Servo
Sail Winch Servo Replacementpart for DF95

579,-

KJØP
Hovedbilde DynoMAX 9685 Charge Lead Futaba RX with 4mm Banana ...
DynoMAX 9685 Charge Lead Futaba RX with 4mm Banana ...
D-MAX™ Charging Harness for Radio Batteries with Futaba Connector This is a charge lead for charging TX & RX radio batteries with a Futaba connector. Specs: Length: 50cm Wires: 20AWG Charger Connectors: 4mm male bullets Battery Connector: Futaba RX

69,-

KJØP
Hovedbilde Traxxas 1726A Antenna, tube, black (1)/ vinyl antenna ...
Traxxas 1726A Antenna, tube, black (1)/ vinyl antenna ...
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

29,-

KJØP
Hovedbilde Traxxas 3232X Super Duty Long Glow Plug
Traxxas 3232X Super Duty Long Glow Plug
This is the Traxxas Super Duty Long Glowplug. FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines           Suited for the varied throttle range of off-road racing           Medium heat range INCLUDES: One Traxxas Medium Heat Range Super Duty Long Glowplug with gasket REQUIRES: Plug wrench  for installing in cylinder head           Glow Fuel with 10%-20% nitro content  

119,-

139,-

Ikke på lager
-14%
Hovedbilde SkyRc eN18 NiMh charger 1.2A 220V Tamiya Hovedbilde SkyRc eN18 NiMh charger 1.2A 220V Tamiya
SkyRc eN18 NiMh charger 1.2A 220V Tamiya
SkyRc eN18 NiMh charger 1.2A 220V Tamiya Kompakt 1.2A lading NiMh-lader 4-8cell Tamiya ladekabel Vegglader Rimelig hurtiglader for 4-8celler NiMh-batterier, laderen går på 220V og strømkabel for tilkobling i stikk-kontakt følger med. Laderen lader fast på 1.2A. Merk at det bare følger med ferdig Tamiya-ladekabel, ladekabel for andre typer må kjøpes i tillegg. Se under tilbehør for de vanligste ladekablene. Spesifikasjoner: Innspenning AC: 100-240V Ladestyrke: 1.2A Effekt: 18W Antall celler NiMH 4-8 Størrelse: 85x50x54mm Vekt: 120gram     Product details in english Compact but Versatile Want to get the most out of your batteries? You really need to make sure you can deliver a full charge to your batteries with a SkyRC eN18 Peak Charger. SkyRC eN18 is more than just a peak charger - its a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the SkyRC eN18 offers voltage ranging from 4.8 to 14.4V at 1.2 amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks, and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receivers pack.

229,-

249,-

KJØP
-8%
Hovedbilde Dynomax 9533 Connector Tamiya Pair
Dynomax 9533 Connector Tamiya Pair
Connector Tamiya Pair

25,-

35,-

KJØP
-29%
Hovedbilde Traxxas 3768 Spring Retainers (2)
Traxxas 3768 Spring Retainers (2)
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Hovedbilde RC Lights 65-10031 Head & Tail Lights With Metal ... Hovedbilde RC Lights 65-10031 Head & Tail Lights With Metal ...
RC Lights 65-10031 Head & Tail Lights With Metal ...
RC Lights 65-10031 Head & Tail Lights With Metal Mounts   Pene lykter til infelling i karosseri. Laget i aluminium.

139,-

KJØP
Hovedbilde Duratrax 2379 Pit Tech Deluxe Truck Stand, Black
Duratrax 2379 Pit Tech Deluxe Truck Stand, Black
Key Features Constructed of sturdy, high-impact polystyrene with aluminum center post Wide reinforced base and tall center post is ideal for monster trucks and 1/8 scale buggies and truggies Rotating top plate with dropped center section to accomodate models with uneven chassis Molded rubber strips on upper plate grips chassis securely Easily accessible extra-large parts tray Disassembles to store flat when not in use, or to take to the track   Includes Pit Tech Deluxe Truck Stand in Black from Duratrax

299,-

KJØP
Hovedbilde DynoMAX B9692 Charge Lead EC3 with 4mm banana ...
DynoMAX B9692 Charge Lead EC3 with 4mm banana ...
Charge Lead EC3 with 4mm banana connectors

75,-

KJØP
Hovedbilde SkyRC eN20 Charger NiMh 1-2-3A 4-8cells 20W 240VAC
SkyRC eN20 Charger NiMh 1-2-3A 4-8cells 20W 240VAC
SKYRC eN20 NiMH/NiCd Charger is an economic, high quality 100-240V AC charger, designed for charging NiMH and NiCad batteries from 4-8 cells. The circuit power is 20W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity. There is one LED indicating the charger status (ready to charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working.   Explanation of LED Status: CHARGE LED STATUS CHARGE STATUS LED Flashes Green The Charger is Ready LED Glows Red Battery Charger in process LED Glows Green Battery charger is fully charged Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.4 x 110.7 x 40.5 mm Weight: 175 g Included: eN20 Charger 240VAC adapter with Euro connector Charging lead with Tamiya connector Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.5 x 110 x 40.4 mm Weight: 175 g

349,-

399,-

KJØP
-13%
Hovedbilde DynoMAX B9668 Charging Lead Futaba RX to XT60 20AWG ... Hovedbilde DynoMAX B9668 Charging Lead Futaba RX to XT60 20AWG ...
DynoMAX B9668 Charging Lead Futaba RX to XT60 20AWG ...
DynoMAX B9668 - Futaba RX Charge Lead for Chargers with an XT60 Output This is a charging lead for batteries with a Futaba RX connector. It fits the latest SkyRC chargers that are equipped with a XT60 male output/charging connector. Specs: Battery Connector: Futaba RX Charger Connector: XT60 Wires: 20AWG Length: 500mm

65,-

KJØP
Hovedbilde Vapex VP2500AA Receiver Battery NiMH 6,0V 2500mAh Flat
Vapex VP2500AA Receiver Battery NiMH 6,0V 2500mAh Flat
  Vapex Instant-series of NiMH batteries with very low self-discharge level. Battery: 5-cell (6V) NiMH AA 2500 mAh Raceiver battery Connector: Futaba Length: 71.8 mm Width: 53 mm Height: 14.7 mm Weight: 148 g

249,-

KJØP
Hovedbilde Liko 4200mAh 7.2v NiMh Tamiya plug
Liko 4200mAh 7.2v NiMh Tamiya plug
Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer! Kapasitet på 4200 mAh Spenning er 7.2V Lengde: 135mm Høyde:    24mm Bredde:   46mm TAMIYA CONNECTOR

399,-

KJØP
Hovedbilde Vapex NiMH Battery 1,2V 3000mAh Sub-C
Vapex NiMH Battery 1,2V 3000mAh Sub-C
  VAPEX NiMH 3000 mAh Sub-C Cell Single Sub-C sized NiMH cell with solder tabs.   Battery: 1.2V 3000 mAh NiMH Sub-C cell Size: L41.7 x D22.2 mm Weight: 56 g     Type of Battery: NiMH Length: 41,7 mm Weight: 54 g Width: 22,2 mm Capacity: 3000 mAh Number of cells: 1 Voltage: 1,2 V

49,-

KJØP
Hovedbilde Vapex AA/R6 Batteri NiMH 2900mAh 4-pack
Vapex AA/R6 Batteri NiMH 2900mAh 4-pack
  The new Vapex'Tech VTE2900AA Series significantly extends the operation time of the devices with an enduring supply of battery energy, they are the most powerful and persistent rechargeable batteries designed to provide unparalleled battery support to bring out the best performance of popular digital devices. High Energy Density   Long Cycle Life (more than 500 cycles)   High Drain Performance (up to 3C)   Fast Charge Performance (up to 2C)    Absolutely no Memory Effect   Safety (Resealing Safety Vent)   Content: 4xAA 2900 mAh NiMH VTE batteries with storage case

169,-

KJØP
Hovedbilde Traxxas 7533 Suspension Pin Set Complete Front/Rear ...
Traxxas 7533 Suspension Pin Set Complete Front/Rear ...
This is a set of Complete Suspension Pins for the Traxxas Latrax Rally Car. FEATURES Steel construction Upper and lower pins for front and rear suspension INCLUDES Eight Suspension Pins, four Screws

75,-

KJØP
Hovedbilde Traxxas 7762 Rebuild Kit GTX Shocks X-Maxx
Traxxas 7762 Rebuild Kit GTX Shocks X-Maxx
Denne er utgått og erstattet med TRX 7762X This is the Shock Rebuild Kit for the Traxxas X-Maxx Monster Truck,     FEATURES Restore like-new performance to worn or leaking shocks  Rebuilds two shocks   INCLUDES Two each;  Cartridges with O-Rings  Bushings  Bushing Clips  Pistons  Boots  O-Rings  4x8mm Washers  Locknuts

Hovedbilde Traxxas 7552X Carriers Stub Axle (2) LaTrax Teton
Traxxas 7552X Carriers Stub Axle (2) LaTrax Teton
NB!! Denne erstatter TRX 7552   This is a pair of Stub Axle Carriers for the LaTrax Teton Monster Truck from Traxxas. FEATURES Molded plastic composite construction INCLUDES Left and Right Stub Axle Carriers

59,-

KJØP
Hovedbilde Traxxas 7530 Bulkhead/Diff Housing Front/Rear
Traxxas 7530 Bulkhead/Diff Housing Front/Rear
This is the Bulkhead for the Latrax Rally Car from Traxxas.     FEATURES Fits front and rear  Plastic construction   INCLUDES Upper and Lower Bulkhead Sections

69,-

KJØP
Hovedbilde Traxxas 7532 Caster/Steering Blocks (2)
Traxxas 7532 Caster/Steering Blocks (2)
By Traxxas   FEATURES Made of black plastic   INCLUDES Two caster hubs (C-hubs)  Two steering blocks   SPECIFICATIONS  caster hubs, length: 28mm (1-1/8")  width: 14mm (1/2")  height: 16mm (5/8")  steering blocks, length: 29mm (1-1/8")  width: 28mm (1-1/8")  height: 20mm (3/4")

59,-

KJØP
Hovedbilde Traxxas 7662 Rebuild Kit Oil-Filled Shocks Teton
Traxxas 7662 Rebuild Kit Oil-Filled Shocks Teton
This is the Shock Rebuild Kit for the LaTrax Teton Monster Truck from Traxxas. FEATURES Rebuilds two shocks INCLUDES Two each, Bladders, Pistons, Shaft Guides, Caps, Rod Ends Four Clips

59,-

KJØP
Hovedbilde Hitec 57351 Y-Extension Wire For Micro Receiver 5th ...
Hitec 57351 Y-Extension Wire For Micro Receiver 5th ...
Features     Hitec 57351S Y-Harness 6"     Allows modeler to plug two servos into one receiver channel Specifications     Length: 6" (152mm) overall 2" (51mm) each Y portion Contents     One 6" Long Y-Harness with One Male Plug and Two Female Plugs Requirements     Installation Comments     Wire color code: Hitec-                            Black: negative                            Red: positive                            Yellow: signal  

85,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png