Hopp til innhold

Ultra Power UP10 AC/DC 2x100W 10A

Art.nr: UP-UP10

1.495,-

UltraPower RC

UltraPower RC

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Ultra-Power UP10 er en alt-i-ett lader for opp til 10A/6S lipo med 2 kanaler som kan benyttes fra både 12V og 220V. Ved 12V inn har man 100W effekt pr kanal, ved 220V inn kan man fordele 100W totalt mellom de to kanalene. Fargeskjerm og micro-USB for tilkopling til PC. 220V kabel følger med, men ikke ladekabler dersom man behøver noe annet enn XT60/XH som er integrert på laderen.

 

Spenning inn AC 220-240V, DC 11-18V
Spenning ut 0.1-26.0V
Ladestrøm 0.1-10.0A x2
Ladestyrke DC 2x100W AC Ch1+Ch2 = 100W
Balansering Max 0.5A/cell
Batterier LiPo/LiHV/LiFeLiIon(1-6S)
  NiMH/NiCd(1-16S)
  Lead Acid 2V-24V(1-12S)
LCD 2.4inch 320x240
Størrelse 135x105x58
Vekt 550g

Produsent

UltraPower RC

Ultra Power - Produsent av ladere

Kunder kjøpte også

This is the 1/10 scale Grasshopper Offroad Racer kit from Tamiya.                                                                               _ FEATURES: Chassis:           ABS resin, tub-type chassis           Esc:                Included           Drive:             2WD, rear drive           Motor:             380 size electric           Full metal bushings           Shocks:            Friction shocks (not oil filled)           Gearbox:           Closed           Differentials:     Gear type diff           Tires:             Ribbed front                              Sandpaddle Rear           Wheels:            1.6" diameter, white five spoke wheels           Speed Control:     Not included           Bumpers:           Reinforced resin front bumper           Suspension:        Front swing axle type                              Rear straight axle with differential           Camber Tie Rods:   Fixed, camber refers to the angle of the tops of                              the tires from vertical when viewed from front or                              behind vehicle           Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of                              the front suspension when viewed from the side of                              the car in relation to the chassis           Steering:          Direct-to-servo with servo saver           Servo Saver:       included (if this applies) INCLUDES: One Grasshopper rolling chassis with friction shocks, 380 motor,             rigid White body, five spoke wheels, front ribbed tires, rear             sandpaddle tires, 50 tooth spur gear, and instructions                                                                               _ REQUIRES: Radio:           2-Channel with 1 Servo           Radio Batteries: (8) AA size           Battery:         6 cell flat w/ standard connector           Charger:         AC/DC Timed or Peak for 6-cell battery           Paint:           Required for painting driver and accessories           Misc. Items:     Building and track equipment Inkl ESC. SPECS:      VEHICLE-           Length:     15.3"    (389mm)           Width:       8.8"    (223mm)           Height:      5.3"    (135mm)           Weight:      1.8 lbs (830g)           Tires:       .87" x 2.9" (22mm x 74mm) width x diameter                        1.6" x 3.2" (41mm x 81mm) width x diameter

1.395,-

1.595,-

KJØP
-13%
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-33 Cherry Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 16AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Tamiya til XT60-plugger. Benyttes for lading av batterier med Tamiya, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 16AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Tamiya

79,-

KJØP
Yeah Racing YBS-0030 Steel Bearing Set (10pcs) For Tamiya Lunch Box / Grasshopper II / Hornet   Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Tamiya Lunch Box / Grasshopper II / Hornet Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (850) (1pc) YB6014B  5mm x 11mm x 4mm (1150) (9pcs)   Include:   Total Bearing (10Pcs)

89,-

99,-

KJØP
-10%
This is the Chassis for use on the                  Traxxas 1/16 E-Revo, Slash VXL and Rally VXL Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: One Chassis REQUIRES: Installation on vehicle SPECS:    Length: 245mm (9.6")           Width: 107mm (4.2")           Height: 40mm (1.6")

189,-

Ikke på lager
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
These are Castor Blocks for the Traxxas                              Rustler and Stampede. FEATURES: Black Plastic Construction INCLUDES: Two Blocks REQUIRES: Traxxas Rustler or Stampede COMMENTS: None

49,-

KJØP
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med EC5 til XT60-plugger. Benyttes for lading av batterier med EC5-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 EC5

79,-

KJØP
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas-ID3 til XT60-plugger. Benyttes for lading av batterier med Traxxas ID3-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Traxxas ID3

125,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png