Hopp til innhold
Hjem / Reservedeler/Option-parts / Body/Karosseri / Alle Traxxas Biler / E-Revo 2.0 Karroserier / Traxxas 8611X E-Revo 2.0 Blå Body
-5%

Traxxas 8611X E-Revo 2.0 Blå Body

Art.nr: TRX 8611X

949,-

999,-

- 5%
Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Body, E-Revo, blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde RPM 80422 Body Savers for Traxxas E-Revo Hovedbilde RPM 80422 Body Savers for Traxxas E-Revo
RPM 80422 Body Savers for Traxxas E-Revo "2.0"
Art.nr: 80422
Copied
RPM Body Savers for Traxxas E-Revo "2.0" Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #8611, #8611A & #8611G bodies RPM engineers examined a brand new E-Revo 2.0 body and were shocked when they discovered cracks around the body mount holes in the body. This vehicle had never been run and the holes were already weakened. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body for $85! RPM Body Savers for the E-Revo 2.0 are a simple, yet clever solution to solve that problem. We disguise our Body Savers in two separate ways. Out front, they look like molded hood vents while in the rear, they look like exposed sections of a roll cage. It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward; there are two pairs of screws holding the sub-frame of the body mounting system to the body in both the front and rear of the truck. Our Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body (wider than currently available washers too). Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with four Body Savers in each kit (two for the front and two for the rear). Tech Notes: RPM Body Savers only work with Traxxas #8611, #8611A & #8611G bodies. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies

149,-

KJØP
Hovedbilde Traxxas 8611T Body E-Revo 2 Purple
Traxxas 8611T Body E-Revo 2 Purple
Art.nr: TRX 8611T
Copied
Body, E-Revo®, orange/purple, window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

949,-

999,-

KJØP
-5%
Hovedbilde Traxxas 8611R Body E-Revo Black
Traxxas 8611R Body E-Revo Black
Art.nr: TRX 8611R
Copied
Body E-Revo Black Body, E-Revo, black/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/10, 1/8 Painted: Yes

949,-

999,-

KJØP
-5%
Hovedbilde Traxxas 8611 Body E-Revo 2 (clear requires painting) ...
Traxxas 8611 Body E-Revo 2 (clear requires painting) ...
Art.nr: TRX 8611
Copied
Body, E-Revo (clear, requires painting)/window, grill, lights decal sheet

349,-

369,-

KJØP
-5%
Hovedbilde Traxxas 8614 Body posts, clipless, front & rear (1 ...
Traxxas 8614 Body posts, clipless, front & rear (1 ...
Art.nr: TRX 8614
Copied
Body posts, clipless, front & rear (1 each)

59,-

KJØP

Kunder kjøpte også

Hovedbilde Sunpadow ERC 2s 7300mAh 110C LiPo Deans
Sunpadow ERC 2s 7300mAh 110C LiPo Deans
Sunpadow 2s 7300mAh 110C med ferdig påloddet T-kontakt (Deans). Kraftig hardcase LiPopakke med meget høy C-rating og kapasitet. Passer utmerket til både on- og off-road samt crawling. Batteriet leveres i egen oppbevaringseske. Spesifikasjoner: Kapasitet: 7300mAh Spenning: 2S 7.4V C-Rating 110C Anbefalt ladestyrke: 1C Vekt: 337gram Størrelse: 139x47x26mm Kontakt: T-Plugg (Deans)

639,-

KJØP
Hovedbilde Gens Ace 3s 5000mAh 60C Bashing G-Tech EC5
Gens Ace 3s 5000mAh 60C Bashing G-Tech EC5
3s 5000mAh - 60C - Gens Ace Bashing G-Tech EC5 er et godt valg til radiostyrte biler som krever 3s LiPo. Batteriet har dimensjonene 135x43x27mm og veier 339g. XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere. PS! Produkt kan avvike fra video: Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen. G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov. G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 339g Størrelse: 135x43x27mm Strømplugg: EC5 Balanseringsplugg G-Tech

599,-

649,-

KJØP
-8%
Hovedbilde WLToys 1652 7.4V 2200mAh Lipo Flat Deans
WLToys 1652 7.4V 2200mAh Lipo Flat Deans
WLToys 7.4V 2200mAh LiIpo for flere ulike WLToys-biler. Blant annet Buggy 124019 Fierce og Truck 124018 Offroad. Flate celler og Deans batteriplugg. Spesifikasjoner Størrelse 101x34x15mm Vekt 112gram Balanseringskontakt XH Batteriplugg Deans

289,-

319,-

KJØP
-9%
Hovedbilde Radient 010065 EC5 PAIRS (10PCS)
Radient 010065 EC5 PAIRS (10PCS)
EC5 PAIRS (10PCS)

419,-

439,-

KJØP
-5%
Hovedbilde Traxxas 5624 Receiver Box
Traxxas 5624 Receiver Box
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silicone grease, 3x8 mm screws (2), 2.5x8 mm screws (2), and 3x6 mm screws (2).

149,-

Ikke på lager
Hovedbilde Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)
Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)
This is a set of Traxxas 6x13x5mm Ball Bearings                    for use on the E-Revo FEATURES: Stainless Steel bearing construction           Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings  Part #5180 SPECS:    Inside diameter: 6mm (0.24")           Outside diameter: 13mm  (0.51")           Width: 5mm (0.20")

65,-

KJØP
Hovedbilde Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)
Traxxas 5120 Ball Bearings 12x18x4mm Revo (2)
These are the replacement Wheel Hub Ball Bearings for                    the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Steel Construction           Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") COMMENTS: These are for the Inside of the Wheel Hubs, the Truck Requires           Four Total of these Bearings.

109,-

KJØP
Hovedbilde EMax ES08MA II 12g Analog Metal Gear Servo. Hovedbilde EMax ES08MA II 12g Analog Metal Gear Servo.
EMax ES08MA II 12g Analog Metal Gear Servo.
EMax ES08MA II Analog Metal Gear Servo. Specifications: Voltage Input:                 4.8-6V Standard Direction:        Counter Clockwise Stall Torque:                   4.8V: 21 oz/in | 6.0V: 25.2 oz/in Operating Speed:           4.8V:  0.12 Sec/60 Degrees | 6.0V: 0.10 Sec/60 Degrees Dimensions:                   23x11.5x24mm (LxWxH) Weight:                          12g Gear Train:                     Metal Servo Type:                   Analog

199,-

KJØP
Hovedbilde EMax ES08MD II 13g Digital Metal Gear Servo. Hovedbilde EMax ES08MD II 13g Digital Metal Gear Servo.
EMax ES08MD II 13g Digital Metal Gear Servo.
EMax ES08MD II Digital Metal Gear Servo. Specifications: Voltage Input:                 4.8-6V Standard Direction:        Counter Clockwise Stall Torque: 4.8V:          21 oz/in | 6.0V: 28 oz/in Operating Speed:           4.8V:  0.12 Sec/60 Degrees | 6.0V: 0.10 Sec/60 Degrees Dimensions:                   23x11.5x24mm (LxWxH) Weight:                          13g Gear Train:                     Metal Servo Type:                   Digital

259,-

KJØP
Hovedbilde Traxxas 8620 Chassis supports, front & rear
Traxxas 8620 Chassis supports, front & rear
Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)

129,-

KJØP
Hovedbilde Traxxas 8614 Body posts, clipless, front & rear (1 ...
Traxxas 8614 Body posts, clipless, front & rear (1 ...
Body posts, clipless, front & rear (1 each)

59,-

KJØP
Hovedbilde Traxxas 5460R Shocks GTR Aluminum Red-Anodized (4)
Traxxas 5460R Shocks GTR Aluminum Red-Anodized (4)
This is a set of four optional Traxxas Aluminum Body GTR Shocks in Red. FEATURES Fits the Traxxas Revo, E-Revo, Summit, Slayer and Jato Machined threaded aluminum body with oversized spring collar forprecise preload adjustmentsVented spring perches help prevent dirt from packing around theX-ring seals Exclusive X-ring seals for better sealing with less friction Volume-compensating bladders ensure perfect damping throughout thedamping range INCLUDES Four Shocks with Silicone Fluid REQUIREMENTS Springs depending on vehicle and desired damping action

749,-

KJØP
Hovedbilde Traxxas 5435 Spring Shock GTR 2.6 Rate Yellow Revo (2)
Traxxas 5435 Spring Shock GTR 2.6 Rate Yellow Revo (2)
This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo.     FEATURES Spring Steel Construction  Red Outer Nylon Coating  Yellow 2.6 tension rating   INCLUDES Two Red 2.6 Springs for the Traxxas GTR Shocks used on the Revo   REQUIREMENTS Nothing   SPECIFICATIONS  Length: 1.8" (46mm)  Outer diameter: 0.83" (21mm)  Wire diameter: 0.08" (2.1mm)

75,-

KJØP
Hovedbilde Traxxas 5446 Wing Black Revo.
Traxxas 5446 Wing Black Revo.
This is the Black Wing for the Traxxas Revo.                  This part attaches to the rear of the body. FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS:    Length: 8" (203.2mm)           Width: 3" (76.2mm)

189,-

KJØP
Hovedbilde Traxxas 8651 Rebuild Kit for Driveshaft (2)
Traxxas 8651 Rebuild Kit for Driveshaft (2)
Rebuild kit, driveshaft (cross pin (2)/ 16mm pin (2)) (metal parts for 2 driveshafts)

49,-

KJØP
Hovedbilde Traxxas 8619 Push Rod Steel HD with Rod Ends (2) ...
Traxxas 8619 Push Rod Steel HD with Rod Ends (2) ...
Push rods (steel), heavy duty (2) (assembled with rod ends)

99,-

KJØP
Hovedbilde Traxxas 8632X Suspension Arms Front Left Blue (1+1) ...
Traxxas 8632X Suspension Arms Front Left Blue (1+1) ...
Suspension arms, blue, front (left), heavy duty (upper (1)/ lower (1))

145,-

KJØP
Hovedbilde Pro-Line 1015510 Trencher HP 3.8 Hovedbilde Pro-Line 1015510 Trencher HP 3.8
Pro-Line 1015510 Trencher HP 3.8" Belted MTD Raid 17mm ...
This is a pair of pre-mounted Trencher HP 3.8" Belted All Terrain Tires. Pro-Line is proud to introduce the History-making Trencher HP 3.8" BELTED All Terrain Truck Tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the new Trencher HP. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 3.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Like the original Trencher X 3.8" tire, the next generation Trencher HP 3.8" is destined to become the ultimate, go-to Bash tire for your truck! Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The new Belted Trencher HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately .(6345-00) The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new Trencher HP 3.8" Belted tires now!   COMPATIBILITY:   Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Tekno RC MT410 Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx

1.049,-

1.099,-

KJØP
-5%
Hovedbilde Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Traxxas 8650 Steel Driveshaft 122,5mm (Shaft only)
Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

139,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png