Hopp til innhold
-7%

Traxxas 8369 Tires Response 1.9" Touring Front (2)

Art.nr: TRX 8369

139,-

149,-

- 7%
Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tires, Response 1.9" Touring (front) (2)/ foam inserts (2)

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
   This is an 18 Meter Roll of 18mm Tamiya Masking Tape. FEATURES: This is a thin, self-adhesive paper tape, developed for model             applications.           Flexible.           Easily applied to curved surfaces making it ideal for masking off             areas for painting, etc.           Comes in a plastic, reusable dispenser.           Dispenser teeth cuts the tape to your desired length. INCLUDES: One Roll Of Masking Tape SPECS:    Length: 18m           Width:  18mm

79,-

KJØP
Easy and professional results can be yours with Tamiya's paint markers. Use them as you would a marking pen. The marker is a small, easy to use pen containing enamel paint formulated for the painting of plastics. Even the unskilled painter can now achieve beautiful results on their models. For expert modelers, it is indispensable for detailing painting and saving time. Excellent for wood, metal, glass as well as on all plastics. Contents: 8 grams       (E)

39,-

79,-

KJØP
-51%
Fornyer gummidekk som har bleknet. Egner seg til dekk av gummi på modeller og radiostyrte biler.   Informasjon på engelsk: ★This coating is for use on car and bike model tires – static, R/C or even Mini 4WD! ★It is a water-based fluid that spreads well and can be easily wiped off. ★Shake the bottle, put a few drops on a cloth and then apply onto the tires for a glossy finish. ★It can also be used to on tires that have whitened, to return them to a more lustrous state. ★Contents: 10ml. *Check rules before applying to tires on any cars which are to join a race.

119,-

KJØP
These are 3mm Nylon Locking Nuts from Traxxas. FEATURES: Durable metal construction           Nylon inserts INCLUDES: (12) Lock Nuts SPECS:    Size:  3mm

29,-

39,-

Ikke på lager
-26%
These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS:    Size:  3x6mm

25,-

30,-

Ikke på lager
-17%
Designed for 190mm wide touring cars, this is the Protoform Mazda Speed 6 Sedan body. FEATURES:           Conforms to all ROAR, EFRA, FEMCA, FAMAR and IFMAR specs           Two lower trims lines. One of the lower lines is for the slightly            taller requirements of BRCA rules           Clear .030" Lexan construction with paint-then-peel overspray film           Clear .030" Lexan wing with mounting hardware           Decal sheet with headlight and tail light decals           Window mask INCLUDES:           One Clear Mazda Speed 6 Body with Overspray Film           One Decal Sheet           One Window Mask Sheet           Two 4-40x1/4" Button Head Screws (1/16" hex size) for wing mounting           Two 4-40 Nylon Nuts for wing mounting REQUIRES:           Body Scissors - and Reamer - and paint of modeler's choice SPECS:              Length: 19.75" (502mm)           Width:  7.5"   (190mm)           Height: 4.5" (115mm)       (B6)

359,-

KJØP
The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit were chosen for users who want to learn setup before levelling up to mid-level Tamiya chassis kits. (More cost-effective than buying each part separately) Included Hop-up Option Parts Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs. /Blue) • 1/10 scale R/C chassis assembly kit. • The rear oil-filled diff gear unit and front direct spool ensure ease of assembly and stable drivability. • Diff. joint cups are lightweight aluminum and give a weight reduction of 7.8g compared to Item 22049’s standard ones. • Direct cups are designed for this chassis kit for improved durability. • This chassis kit features dependable 4-wheel independent double wishbone suspension from Item 42345 (1/10 R/C TRF420 Chassis Kit) for effective setup options. • Newly shaped propeller joints are compatible with swing shaft protectors. These parts use plastic parts at joint sections with stainless pins and aluminum joints to limit wear of parts. • Uses Item 22054 37mm Drive Shafts which allows stable steering and cornering for superior performance at races. • Rear drive shafts are 39mm size which are specific for this chassis. These also have a hard coat to enhance durability and lubricity. • High speed gears and 27T pinion gears (gear ratio: 6.55: 1) are included as the kit-standard parts. • Included TT-02 hi-torque servo saver allows steering angle limit to prevent damage of steering servo. • Includes full ball bearings. • Comes with a carrying case dedicated for the TT-02 Type-SRX chassis. • Required to complete: 2-channel radio, steering servo, ESC, motor, 7.2-7.4volt battery with compatible charger, body, and tires.

3.695,-

4.595,-

KJØP
-20%
Extension Balance Lead 2S XH 30cm This is a practical extension lead suitable for Lithium based batteries that are equipped with the popular XH balancing connector. When charging the battery is recommended to be inside an charging/storing safe bag and the original short balance lead/adapter makes it hard to reach. With this extension lead the charging is much easier! Specifications: Cells: 2 Length: 30cm Wires: 22AWG Connectors: JST-XH Male & Female

29,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

KJØP
-8%
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-12 Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is the Tamiya 1/10 scale Porsche Carrera 911 RSR Race Car Body. FEATURES Compatible with Tamiya TT-01, TT-01 Type-E and TT-02 chassis (short wheelbase) Molded polycarbonate construction ABS molded plastic side mirrors, black in color Stick sheet with body trim and sponsor logos  INCLUDES Porsche Carrera 911 RSR Race Car Body, Side Mirrors, two Sticker Sheets, Window Mask, Hardware and Instructions REQUIREMENTS Body scissors and reamer Polycarbonate safe spray or brush-on paint SPECIFICATIONS Length: 17.5" (445mm) Width: 7.5" (190mm) Height: 4.2" (106mm) Thickness: 0.039" (1mm)       (B7)

599,-

679,-

KJØP
-12%
Tamiya 87208 masking tape 3mm Paper tape that can be conveniently used for different paintings A thin, highly adhesive masking tape developed exclusively for models. It fits well on the uneven surface and does not soak in the paint, and the thinness of 0.08 mm makes the step difference between different coatings inconspicuous. As the width is as thin as 3 mm, it is ideal for curved parts and fine painting, such as window moldings for car models and canopies for airplane models. A reinforcing plate is attached to the side surface to prevent dust from adhering and the tape to be deformed. The core material is made of plastic that does not generate paper dust. Basic specifications Width 3 mm, length 18 m. The color is yellow. A PET reinforcing plate is attached to the side. This is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. At just 3mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. Plastic core ensures minimal dust is produced. Length: 18m, width: 3mm   Uses a resin core material that does not generate paper dust. The sides are reinforced with PET resin discs. Delicate masking is possible according to the shape of fine parts and curved parts.

49,-

KJØP
Wheels, 1.9" split-spoke (black chrome) (front) (2)

89,-

KJØP
Wheels, 1.9" split-spoke (black chrome) (wide, rear) (2) Pair of 1.9″ extra-wide black chrome Split-Spoke rear wheels

99,-

KJØP
Tires, Response 1.9" Touring (extra wide, rear)/ foam inserts (2) (fits #8372 wide wheel)

135,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png