Hopp til innhold
-13%

Traxxas 7054 Stub Axle Steel/Yokes VXL (2)

Art.nr: TRX 7054

69,-

79,-

- 13%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Assembled Stub Axles and Yokes for use on the
                Traxxas 1/16 E-Revo VXL , Rally and Slash Vehicles.


FEATURES: Steel constructed axles
          Black in color


INCLUDES: Two Assembled Stub Axles and Yokes


REQUIRES: Installation on the vehicle


SPECS:    Length: 31.45mm (1.2")

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Yeah Racing RC PTFE Bearing (8x12x3.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6020BS/10) RC Telfon Bearing (8x12x3.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.    Preparation:     High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

89,-

99,-

KJØP
-10%
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

KJØP
-7%
 This is a package of four 4mm Flanged Locknuts in Green from Traxxas. FEATURES: May be used in any application requiring this size locknut           Serrated rear section ensures sure grip INCLUDES: Four 4mm Flanged Locknuts REQUIRES: 7mm Nut Driver SPECS:    Hex Size: 7mm           Hole Diameter: 4mm

99,-

109,-

KJØP
-9%
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
This is 30K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 30K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

KJØP
These are the Pushrods for use on the                          Traxxas 1/16 Slash VXL 4WD RTR                           Rally, Mustang, Ken Block Rally and Kyle Busch. FEATURES: Nylon construction           Red in color INCLUDES: Two Front and two Rear Toe Links           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 67mm (2.6")           Diameter: 5mm (0.20")

79,-

89,-

KJØP
-11%
These are the Pushrods for use on the                   Traxxas 1/16 Slash VXL 4WD RTR                   Rally, Mustang, Ken Block Rally and  Kyle Busch  FEATURES: Nylon construction           Red in color INCLUDES: Four Pushrods           Eight Hollow Balls REQUIRES: Installation on the vehicle SPECS:    Length: 55mm (2.2")           Diameter: 5.2mm (0.20")

75,-

KJØP
This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 1400mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S2P  Continuous Discharge: 25C (35A)  Max Burst Rate: 50C (70A)  Watt Hours: 15.54  Charge Rate: 1C (1.4A)  Max Charge Rate: 2C (2.8A)  Dimensions: 3.5 x 0.83 x 1.2" (89 x 21 x 30mm)  Weight: 4.2oz (118g)

469,-

489,-

KJØP
-4%
These are the Black Chrome Gemini Wheels for use on the                 Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction           Black in color           Black chrome spokes INCLUDES: Two Black Chrome Gemini Wheels REQUIRES: Tires           Installation on the vehicle SPECS:    Outer Diameter: 59.4mm (2.3")           Width: 38.6mm (1.5")           Hex: 12mm

109,-

119,-

KJØP
-8%
These are the Talon Tires with Foam Inserts for use on the                  Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Talon tread           Gray foam inserts INCLUDES: Two Talon Tires with Foam Inserts REQUIRES: Installation on the vehicle           Tire Glue. SPECS:    Outer Diameter: 83mm (3.3")           Inner Diameter: 50mm (2")           Width: 49.4mm (1.9")

145,-

KJØP
These are the Traxxas Talon Tires Pre-Mounted on Gemini Black Chrome Wheels. FEATURES: Nylon wheels           Gemini 5-spoke design           Black chrome in color INCLUDES: Two Pre-assembled Tires and Wheels with Foam Inserts REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 83mm (3.3")           Width: 48.3mm (1.9")           Hex: 12mm

279,-

Ikke på lager
This is the Steel Driveshaft Rebuild Kit for use with the  Traxxas 1/16 scale E-Revo, Slash and Rally VXL Vehicles.     FEATURES Steel construction   INCLUDES Two Cups  Two Shafts  Four Black Rubber O-Rings  Four Pins  Two Retainers   REQUIREMENTS Disassembly of driveshaft components

189,-

KJØP
This is 10K wt Differential Oil for the Traxxas Revo                  but can be used in other vehicles as well. FEATURES: 10K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

89,-

KJØP
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
        This is the optional 55T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 55T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 30mm (1.2")           Inner Diameter: 5.5mm (0.22")           Width: 7.2mm (0.28")

39,-

KJØP
This is the Complete Slipper Clutch for use on the                 Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: One Slipper Clutch Hub           One Clutch Pad           One Spring           One 3mm Locking Nut           1.5x6mm Pin REQUIRES: Installation on the vehicle

59,-

Ikke på lager
These are the Front and Rear Differential Cover Plates          for use on the Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front and One Rear Diff Cover Plate           Two O-Rings           Two Gaskets           Three 2x14mm Button Head Screws REQUIRES: Installation on the vehicle

39,-

Ikke på lager
This is the Differential Gear Set for use on the                  Traxxas 1/16 E-Revo, Summit, Rally and Slash VXL Vehicles. FEATURES: Steel construction INCLUDES: Two Output Gears           Three Spider Gears           Two Differential Output Shafts           Three 1.5x6mm Pins           Two 1.5x8mm Pins REQUIRES: Installation on the vehicle

129,-

KJØP
This is a Shock Spring Set for the Traxxas 1/16 Summit                         with a Pink spring rate FEATURES: Spring,shock(GTR) for 1/16 Summit INCLUDES: Two Springs REQUIRES: Installation onto shocks SPECS:    Spring Rate:  (Pink)           Length:       23mm           Diameter:      1.43mm

49,-

KJØP
This is the Diff Shim Set for the Associated 18T. FEATURES: Steel construction INCLUDES: Four shims and instruction sheet REQUIRES: Installing on differential shaft SPECS:    Diameter: inner 8mm, outer 10mm

79,-

89,-

Ikke på lager
-11%
This is the optional Heavy-Duty Servo Saver Spring for the Traxxas Revo. FEATURES: Steel construction           Chrome Plated           Conical Shape INCLUDES: One Heavy-Duty Servo Saver Spring REQUIRES: None SPECS:    Small Diameter:   12mm (.472")           Large Diameter:   22mm (.866")           Static Height:    14mm (.551")           Diameter of wire:  3mm (.118") COMMENTS: If the Upper & Lower Steering Arms are needed, use TRX 5344-

35,-

KJØP
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-12 Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
This is a Complete Accessory Package of Replacement Steering and Throttle Servo Horns for the Traxxas Revo Truck. FEATURES Black and grey plastic construction INCLUDES Four throttle servo horns (Airtronics/Sanwa, Hitec, KO Propo/Fut, JR) Eight steering servo horns for the above mentioned radio brands REQUIREMENTS Nothing. These are direct replacement parts. COMMENTS This package is used when installing servo brands other than Traxxas or Futaba.

125,-

KJØP
These are the A Parts for the Tamiya #58593 M-05 Ver.II PRO Chassis Kit.   FEATURES Replaces worn or broken chassis parts in the M-05 Ver.II PRO Chassis,  and may also be used to update the M-05 version I kit to version  II specifications  Moves motor position 3mm closer to center for improved balance  Compatible with square-shaped battery packs and low-profile servos  Compatible with the Tamiya #54606 one-piece lower suspension arm set   INCLUDES A Parts for the Tamiya #58593 M-05 Ver.II PRO Chassis Kit with  instructions       (D15)

149,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png