Hopp til innhold
-9%

Traxxas 6717X Rustler 4x4 Silver/Blue Complete with Body Mounts

Art.nr: TRX 6717X

639,-

699,-

- 9%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Body Rustler 4x4 Silver/Blue (Complete with Body Mounts)

Body, Rustler® 4X4 VXL, Silver/Blue Window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Specifications:

Car Type: Truck
Scale: 1/10
Painted: Yes

 

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 6710
Copied
Traxxas body reinforcement sets provide added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits.

59,-

KJØP
Art.nr: TRX 6717G
Copied
Body, Rustler 4X4 VXL, green/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

639,-

699,-

KJØP
-9%
Art.nr: TRX 6717R
Copied
Body, Rustler 4X4 VXL, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

639,-

699,-

KJØP
-9%
Art.nr: TRX 6717P
Copied
Body Rustler 4x4 Pink (Complete with Body Mounts) Body, Rustler® 4X4 VXL, pink/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Specifications: Car Type:Truck Scale:1/10 Painted:Yes

639,-

699,-

KJØP
-9%
Art.nr: TRX 6717T
Copied
Body Rustler 4x4 Orange (Complete with Body Mounts) Body, Rustler® 4X4 VXL, orange/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Specifications: Car Type: Truck Scale: 1/10 Painted: Yes  

639,-

699,-

KJØP
-9%

Kunder kjøpte også

RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Green Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

KJØP
Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)   Accessory part for these models: Bandit VXL Bandit E-Maxx Brushless E-Maxx Ford Fiesta® ST Rally Ford Raptor Nitro 4-Tec Nitro Rustler Nitro Slash Nitro Sport Nitro Stampede Rally VXL Rustler VXL Rustler Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4Slash VXL Slash Stampede 4x4 VXL Stampede 4x4 Stampede VXL Stampede T-Maxx Telluride 4x4 Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Craniac® Ford F-150 Raptor Rustler VXL Rustler Skully Slash VXL Slash Stampede VXL Stampede

179,-

189,-

KJØP
-5%
This is the optional Low CG Conversion Kit for the  1/10 scale 2WD Traxxas Slash.     FEATURES Lowers the chassis 1" (25.4mm) for better handling and greater  cornering speed  Holds battery and electronics as deep in chassis as possible  45% lower battery position   INCLUDES Chassis  Lower Chassis  Two Nerf Bars  Battery Hold Down with Front and Rear Retainers  Two Front Shock Springs  Hardware and Instructions

439,-

499,-

KJØP
-12%
RPM Gear Cover for 2WD Rustler, Stampede, Bandit & Slash - Green Replaces the stock Traxxas #3792 Quick Notes: Fits all versions of the Traxxas 2WD Rustler, Stampede, Bandit & Slash Not recommended for spur gears larger than the stock 87 teeth Replaces the stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required. Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues. Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

KJØP
This is the replacement front bumper for the TRX-1 and TRX-3.  It is molded of white plastic.  It is 2 3/8" long. INCLUDES:  1- front bumper

39,-

KJØP
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
This is a Traxxas 48P, 90T Spur Gear for models                        with Torque Control Slipper Clutch. FEATURES: 48 pitch           90 tooth           Designed for models with a slipper clutch           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   90

49,-

KJØP
Passer på Traxxas 1/16 biler også.  This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec. FEATURES: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD remote             control sedan.           Metal construction INCLUDES: One Pinion Gear           One Set Screw SPECS:    Teeth: 28           Pitch: 48

39,-

Ikke på lager
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES: Steel construction INCLUDES: 16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES: Installing on motor shaft SPECS:    Number of Teeth: 16T           Pitch: 48           Inner Diameter: 0.12" (3mm)

49,-

59,-

Ikke på lager
-17%
This is the Rear Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

49,-

59,-

KJØP
-17%
Shock tower, rear, extreme heavy duty, blue (for use with #9080 upgrade kit) Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

79,-

KJØP
 These are the Optional Titanium Nitride coated                       XX-long Shock Shafts from Traxxas. FEATURES: Features a Titanium Nitride coating for increased durability.           These shock shafts have a Gold color finish. INCLUDES: Two XX-Long Shock Shafts REQUIRES: Two XX-long Traxxas shocks SPECS: Length- 2.1"(52.8mm)        Diameter- 0.1"(3mm)

119,-

KJØP
Traxxas 6796 LED Light Roof Rustler 4x4 (Body (#6717)

239,-

259,-

KJØP
-8%
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

KJØP
These are the Rear Heavy Duty Stub Axles for the Slash 4x4 from Traxxas FEATURES: Aluminum construction INCLUDES: 2 rear stub axles           2 pins REQUIRES: Installation on vehicle

75,-

KJØP
Yeah Racing RC PTFE Bearing (10x15x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6023BS/10) RC Telfon Bearing (10x15x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

99,-

119,-

KJØP
-17%
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

79,-

KJØP
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

KJØP
-12%
Bumper, rear/ bumper mount, rear

89,-

KJØP
Body, Ford Fiesta® ST Rally (painted, decals applied)   Car Type: Rally Scale: 1/10 Painted: Yes Also Including: Decals

839,-

899,-

KJØP
-7%
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)

99,-

KJØP
     This is the Body Mount Posts/ Body Post Pivot/ Screw Pins 2.6x18mm                For the Traxxas 1/7 XO-1 On-Road Supercar TQi FEATURES: Black colored INCLUDES: Two mount posts           Two post pivots           Two screw pins

59,-

69,-

KJØP
-14%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png