Hopp til innhold

Traxxas 6550X Telemetry Expander Module 2.0

Art.nr: TRX 6550X

479,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

  • INFORMATION
  • Traxxas models equipped with the TQi radio system: 
    The Telemetry Expander 2.0 connects directly to the TQi receiver using the supplied 6525 communication link cable.

    X-Maxx, E-Revo, and Unlimited Desert Racer: 
    Install the Telemetry Expander 2.0 and GPS Module for even more accurate speed measurements compared to the built in speed output from the VXL 6S and VXL 8S electronic speed controls. Plus, add the ability to install additional sensors to monitor parameters such as motor temperature. The Telemetry Expander connects directly to the VXL-6S or VXL-8S electronic speed control using the new Traxxas Data Link Cable 6566 (sold separately). Using the 6566 cable is a plug-and-play solution that conveniently eliminates the need to open the waterproof receiver box to add additional cables.

    Vehicles equipped with the 6590 High Voltage power amplifier: 
    The 6590 High Voltage Power supply is used for lighting accessories such as the 8485 off-road lighting set for the Unlimited Desert Racer. The 6550X Telemetry Expander can be conveniently connected directly to the 6590 high voltage power amplifier using the new 6565 Data Link Cable (sold separately). This provides a quick and easy plug-and-play connection without having to open the waterproof receiver box to add additional cables.
     
    • Sealed, waterproof design
    • Provides real-time telemetry data with up to 3 temperature and 3 voltage sensors
    • Connects via communication cable to #6533 receiver, #6590 Power Amplifier*, or directly to VXL-6s* and VXL-8s* ESCs
    • Compatible with existing vehicle mounts and smart sensors

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is the Long Temperature and Voltage Sensor from Traxxas. FEATURES: Functions with the Traxxas Link system to display battery voltage and             temperature INCLUDES: Long Temperature and Voltage Sensor with Mounting Screw SPECS:    Length: 14" (356mm)

139,-

159,-

KJØP
-13%
Body E-Revo Black Body, E-Revo, black/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting) Car Type: Truck Scale: 1/10, 1/8 Painted: Yes

949,-

999,-

KJØP
-5%
Body, E-Revo (clear, requires painting)/window, grill, lights decal sheet

349,-

369,-

KJØP
-5%
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Yeah Racing Split JST Connector Harness Female 2pcs Description: Split JST connector for you to power more than one device from one power source! Be it lights or winches on your truck! Feature: For: Fans/Winch Powering Material: Plastic Color: Black/Red Include: Split Harness (2 pcs)

39,-

KJØP
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)

89,-

KJØP
Data Link Telemetry Expander (#6550X - #6590) Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)

59,-

KJØP
RPM Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rustler 4×4 & Hoss 4×4 - Red Replaces stock Traxxas #3655R & #3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.  

159,-

KJØP
Telemetry Expander Mount for Rustler, Bandit, Slash 2WD.   Accessory part for these models: -Bandit VXL -Ford F-150 Raptor -Ford Raptor -Rustler VXL -Rustler -Slash VXL -Slash

119,-

KJØP
This is the Rear Tire set for the Traxxas Bandit vehicle FEATURES: Rubber Anaconda tires           Split X-Pattern tread           Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS:    Overall Diameter: 3.54" (90mm)           Width: 1.69" (43mm)

339,-

369,-

Ikke på lager
-8%
This is the Front Tire set for the Traxxas Bandit. FEATURES: Rubber Anaconda tires           Split X-Pattern tread           Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS:    Overall Diameter: 3.30" (84mm)           Width: 1.10" (28mm)

279,-

299,-

KJØP
-7%
LED light harness, rock lights, TRX-6™ (requires #8026X for complete rock light set)

129,-

KJØP
Traxxas TQi & Aton Transmitter Phone Mount Mount a Mobile Device to your TQi or Aton Transmitter The new Traxxas RC Transmitter Phone Mount provides a convenient mounting base for your mobile device on TQi and Aton transmitters. This mount makes monitoring real-time telemetry and adjusting settings simple, keeping your device secured to the radio for easy access. Spring loaded clamps hold a variety of mobile devices to the mount, and the base swivels and tilts to customize the position. Get the most from Traxxas Link telemetry accessories and apps with the new Transmitter phone mount.   Neither a smart-phone or a transmitter is included.  

199,-

219,-

KJØP
-9%
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
UGEARS UG70043 - Mechanical "Fidget" Happy New Gear/Christmas A set of 4 Fidget Happy New Year/Christmas Models! The unique set of 4 individual miniature models for self-assembly for grown-ups and kids from 5 years to 80 and beyond. The set includes Stocking, Christmas Tree, Clock, Christmas Ball Bauble. Each model has basic elements of mechanics. It’s made entirely from high-grade wooden materials. All component parts are already cut off and can be easily removed from the board. The model assembles easily like a puzzle without glue, toothpicks and special tools by following an illustrated color manual. Use them to organize your thoughts and ideas, to calm down and adjust to the New Year. Each model has an eyelet for hanging, decorate your houses and Christmas Tree. Also it’s a great welcome gift to your beloved or a compliment to your friends and colleague. Specs: Part Number: UG70043 EAN: 4820184120716 Number of components: 8-13 (depending on the model) Estimated time of assembly: 0.5-2 hours Level: Easy Recommended Building Age: 14+ Model for self-assembly without glue Models Size: 1.5 x 5 x 4.3 cm (depending on the model) Package Size: 10 x 7.5 x 1.6 cm

139,-

KJØP
Battery/charger completer pack (includes #2972 Dual iD charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo battery (2))

2.995,-

3.495,-

KJØP
-14%
Mount, telemetry expander (fits XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4) (*requires rear chassis brace #5632)

115,-

KJØP
This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.     FEATURES Aluminum construction, blue in color   INCLUDES Rear Chassis Brace  Two 3x35mm Socket Head Screws  One 4x14mm Button Head Screw  Instruction Sheet   SPECIFICATIONS  Length: 5.1" (129mm)

129,-

139,-

KJØP
-7%
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
These are the Traxxas Telemetry Trigger Magnet Holders,                        Spur Gear/Telemetry Trigger Magnet FEATURES: Black plastic and metal construction INCLUDES: Two different plasting holders           One disk-shaped magnet           Three 8mm screws           Three 10mm screws SPECS:    Magnet diameter: 5mm           Magnet thickness: 2mm

35,-

Ikke på lager
This is the Temperature Sensor Mount for the Traxxas TQi Telemetry System. FEATURES: For use with electric powered Traxxas vehicles INCLUDES: Mount, Plastic Tie, and Thermal Pad

39,-

49,-

KJØP
-20%
This is the Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. FEATURES: 5x2mm round magnet INCLUDES: Telemetry Trigger Magnet for the Traxxas TQi Telemetry System

25,-

KJØP
Telemetry GPS module 2.0, TQi radio system.  - Provides accurate speed data using GPS and GLONASS technology  - Plug and play installation  - Easy to read status LED Use with Telemetry Expander 2.0 (6550X).  Does not work with Telemetry Expander (6550)

1.095,-

1.195,-

KJØP
-8%
This is the Long RPM Sensor for the                    XO-1 On-Road Car from Traxxas. FEATURES: Functions with the Traxxas Link system to display motor RPM INCLUDES: Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws PECS:    Length: 15" (381mm)  

139,-

KJØP
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png