Hopp til innhold

Traxxas 5631 Bulkhead Rear Left & Right Halves

Art.nr: TRX 5631

185,-

Traxxas

Traxxas

På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Rear Bulkhead for use on the
                   Traxxas Summit Truck RTR


FEATURES: Nylon construction
          Black in color


INCLUDES: One Rear Bulkhead (left and right halves)


REQUIRES: Installation on the vehicle

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

These are Inner Drive Cups for the Traxxas Revo/T-Maxx. FEATURES: Steel construction INCLUDES: Two steel constant velocity driveshafts           Two M4/15 screw pins REQUIRES: Installation onto vehicle. SPECS:    Length: 18mm (.70")           Diameter: 13mm (.51")

99,-

KJØP
This is a Package of Replacement Caster Spacers for the Traxxas.                   These spacers adjust caster of the wheels. FEATURES: Black nylon construction. INCLUDES: Four caster spacers           Four caster shims REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Thickness: 2mm (0.08")

39,-

KJØP
This is a set of Steel Driveshafts for the Traxxas  Revo/Maxx. FEATURES: Steel construction           Can be used to replace a bent or damaged front center driveshaft           Assembled with inner & outer dust boots INCLUDES: Four steel constant-velocity driveshafts SPECS:    Length: 7" (177.8mm) between canter of ball ends           Diameter: .19"  (5mm)   Reservedeler:   Traxxas 5129 Driveshaft Assembly Rebuild Kit Revo/T-Maxx   Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)   Traxxas 5153R Drive Cups Inner Revo (2)   Traxxas 5154 Drive Shaft Steel Constant Velocity Revo/T-Maxx   Traxxas 5166 Stub Axle/Axle Sleeve Revo/T-Maxx        

899,-

949,-

KJØP
-5%
These are the Optional Axle Carriers L & R for                       use on the Traxxas Revo series, E-Maxx, T-Maxx and Summit FEATURES: Nylon Construction           Black in Color           Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier           One Right Axle Carrier           Four Dust Boot Retainers           Two Bearing Spacers REQUIRES: Installation  

109,-

119,-

KJØP
-8%
This is the Locking Differential Ouput Gear for use on the                      Traxxas Summit Truck RTR. FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear           One Differential Slider           One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

149,-

169,-

KJØP
-12%
This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.     FEATURES Aluminum construction, blue in color   INCLUDES Rear Chassis Brace  Two 3x35mm Socket Head Screws  One 4x14mm Button Head Screw  Instruction Sheet   SPECIFICATIONS  Length: 5.1" (129mm)

129,-

139,-

KJØP
-7%
Pacer has designed this bottle of Threadlocker Compound to be        used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS:    Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker           Locks threaded fasteners against vibration           Perfect for use in helicopters and all RC cars           Clean and dry parts for best results (removing grease, oil and dirt)           Parts can be returned to service immediately in MOST CASES           Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue.  The             reason being is the glue requires a large amount of oxygen or the             glue will dry out.  All one would need to do once you have the glue             is shake the bottle and turn upside down, if the tip turns Blue             then the glue is present.  To some the bottle may appear empty.

59,-

Ikke på lager
Rod ends (8)/ hollow balls (8)

49,-

KJØP
This is the Housing for the Front and Rear Differential on the                    Traxxas Summit Truck RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Differential Housing REQUIRES: Installation on the vehicle

59,-

KJØP
This is the Battery Compartment Door and Vents for use on                 the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Battery Compartment Door           Two Vents REQUIRES: Installation on the vehicle

59,-

KJØP
Traxxas 5352T - Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

119,-

129,-

KJØP
-8%
1/2-OFFSET - 4WD FRONT & REAR Fits: Traxxas SUMMIT Front & Rear HPI SAVAGE FLUX HP Front & Rear HPI SAVAGE XL Front & Rear HPI SAVAGE X 4.6 Front & Rear Kyosho Mad Force Kruiser 4WD Front & Rear Kyosho FO-XX VE 4WD Front & Rear Kyosho FO-XX GP 4WD Front & Rear Also fits other 1/8 Scale Monster Trucks with 17 mm hex Also fit these Traxxas Trucks if converted with 17 mm hexes - 5353X, 5353G & 5353R: Traxxas E-REVO Front & Rear TRX56036-1 Traxxas E-REVO Front & Rear TRX56036-4 Also fit these Trucks if you want a wider stance (width): Traxxas E-Maxx Front & Rear (if converting to 17 mm hexes) Traxxas E-Maxx Brushless Front & Rear Traxxas E-REVO Front & Rear (if converting to 17 mm hexes) Traxxas E-REVO Brushless Front & Rear Traxxas REVO 3.3 Front & Rear Traxxas T-Maxx 3.3 Front & Rear (if converting to 17 mm hexes) Arrma Kraton Front & Rear Arrma Talion Front & Rear Arrma Nero Front & Rear Specs: Wheel diameter: 3.8" Tire Diameter: Tire Width: Weight (each): Hex: 17 mm Offset: 1/2" Tire Compound: Sport Wheel finish: Chromed Nylon

599,-

649,-

KJØP
-8%
These are the optional 17mm Splined Wheel Hubs for the E-revo 1/10 and E-max 1/10 with brushmotor.              FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel hubs and nuts REQUIRES: Installation on the vehicle

289,-

299,-

KJØP
-3%
This is a pair of replacement Toe Links for the Traxxas Revo Truck.             These adjust the position of the toe on the vehicle. FEATURES: Steel turnbuckle design           5.0mm diameter INCLUDES: Two front or rear toe links REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 5.1" (129mm)

125,-

KJØP
This is the Rocker Arm Set Progressive 2 (90-T)                         for the REVO from Traxxas. FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set           Eight red Aluminum Spacers REQUIRES: TRX 5319 Steel Pushrod -or- the Optional TRX 5318X Aluminum Pushrod

139,-

149,-

KJØP
-7%
This is the pair of Steel Pushrods for the Traxxas Revo. FEATURES: Metal pushrod construction           Plastic rod ends with hollow ball ends INCLUDES: (2) pushrods           (4) rod ends           (4) hollow ball ends REQUIRES: Installation on a Traxxas Revo SPECS:    Pushrod length end-to-end:      4-1/16"        (102mm)           Pushrod length between threads:  3-1/4"        ( 81mm)           Diameter of unthreaded section:   3/16"        (  5mm) COMMENTS: These pushrods work with the long travel TRX 5356, or              progressive rocker 1 TRX 5357, arm sets.

89,-

Ikke på lager
This is a set of Rod Ends for the Traxxas Revo.               They are to be used on the Rear Toe-Link Rods only. FEATURES: Plastic construction           Black in color INCLUDES: Four Rear Toe-Link Rod Ends REQUIRES: Assembly to vehicle SPECS:    Length:              23mm (.91")           Width at ball joint: 11mm (.43") COMMENTS: Ring on the rod end shaft denotes for Rear Toe Links only.           If Pivot Balls are needed, use TRX 5355 or 5355X

25,-

KJØP
This is the Steel Suspension Pin Set for the Traxxas Revo.                 They are also commonly known as Hinge Pins. FEATURES: Steel construction           Polished finish INCLUDES: Two Long Suspension Pins           Four Short Suspension Pins REQUIRES: Assembly to vehicle           If the Caster Spacers are need, use TRX 5134 SPECS:    Long Suspension Pin Length:   85mm (3.35")           Short Suspension Pin Length:  24mm (0.95")           Pin Diameter:                3.3mm (0.13")

59,-

KJØP
WD-40 250ml Aerosol Product description The WD-40 Aerosol 250ml can be used for multiple jobs around the home, garage or workshop. It cleans grease and grime as well as dissolving adhesives, allowing the easy removal of labels and stickers. Use WD-40 to protect metal surfaces against moisture and other corrosive elements and lubricate all moving parts. It can also be used to penetrate rusted or frozen metal parts for easier removal. WD-40 displaces moisture and is ideal for use on electrical systems to eliminate moisture-induced short circuits (always turn the power off before you spray). Features & Benefits of WD-40 Aerosol 250ml Stops squeaks Drives out moisture Cleans and protects Loosens rusted parts Frees sticky mechanisms Aerosol spray with straw WD-40® MULTI-USE PRODUCT FULFILLS FIVE BASIC FUNCTIONS: LUBRICATES: The product's lubricating ingredients are widely dispersed and tenaciously held to all moving parts. PENETRATES: WD-40® Multi-Use Product loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. PROTECTS: The product protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elements. REMOVES: WD-40® Multi-Use Product gets under dirt, grime and grease. Use it to remove gunk from tools, equipment and vehicles. WD-40® Multi-Use Product in liquid form (e.g., gallon) also dissolves adhesives, allowing easy removal of excess bonding material. DISPLACES MOISTURE: Because it displaces moisture, WD-40® Multi-Use Product quickly dries out electrical systems to eliminate moisture-induced short circuits.

119,-

KJØP
This is a replacement Half Shaft Set for the Traxxas Revo Truck. This package contains a portion of the telescoping drive shafts. FEATURES: Black plastic construction Blue rubber shaft boots INCLUDES: Two half shaft assemblies REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 120mm (4.7")

89,-

KJØP
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
Erstatet av TRX 5452X   These are the Drive Shaft Joints for the Traxxas Revo and E-max FEATURES: Steel universal joint set INCLUDES: Four Steel Universal blocks           Four Steel Universal pins           Two black steel set pins           Four steel hinge pins           Four steel bearing pins           Eight 1.4mm e-clips REQUIRES: Installing on Traxxas Revo

This is a pair of replacement Drive Yokes for the Traxxas Revo.               These yokes attach to the half shaft assemblies. FEATURES: Black plastic construction INCLUDES: Two yokes           Two drive pins REQUIRES: Nothing.  These are direct replacement parts.  

49,-

KJØP
This is the optional Heavy-Duty Servo Saver Spring for the Traxxas Revo. FEATURES: Steel construction           Chrome Plated           Conical Shape INCLUDES: One Heavy-Duty Servo Saver Spring REQUIRES: None SPECS:    Small Diameter:   12mm (.472")           Large Diameter:   22mm (.866")           Static Height:    14mm (.551")           Diameter of wire:  3mm (.118") COMMENTS: If the Upper & Lower Steering Arms are needed, use TRX 5344-

35,-

KJØP
This is the Rear Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

49,-

59,-

KJØP
-17%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png