Traxxas

Traxxas 3956R Spur 32P 54T Spur Slash 4x4

Art.nr: TRX 3956R

39,-

Traxxas

Traxxas

** Ikke på lager

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the 54 Tooth Spur Gear
for the Traxxas Slash 4x4 Center Differential.

FEATURES: Nylon construction
0.8 metric pitch

INCLUDES: One 54T 0.8 Pitch Spur Gear

REQUIRES: Installing in center differential

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor

Hovedbilde Traxxas 3351R Velineon 3500 Brushless Motor

Traxxas 3351R Velineon 3500 Brushless Motor

This is the Velineon 3500 Brushless Motor from Traxxas. FEATURES: Massive torque and linear power Optimized for 1/10th scale vehicles Ultra high temp sintered neodymium motor magnets 12-gauge motor wire with gold-plated bullet connectors Efficient, high-speed ball bearings Consistent, high-power output Precision-balanced rotor Solder tabs with protective end caps Fully rebuildable INCLUDES: One Velineon 3500 Extreme Brushless Motor REQUIRES: Installation on vehicle SPECS: Type: Sensorless Brushless RPM/volt: 3500 (10-turn) Wire size: 12-gauge Maxx Cable Max RMP: 50,000 Weight: 9.24 oz (262g) Current Ratings: 65A constant / 100A peak/burst Magnet type: Ultra High-Temp. Sintered Neodymium Connection type: Solder tab / TRX 3.5mm Bullet

1.195,-

1.295,-

-8%

Hovedbilde HPI Racing 105509 Complete Differential /Pinion Gear

HPI Racing 105509 Complete Differential /Pinion Gear

THIS PART FITS THE FOLLOWING KITS / PARTS: Mini Recon

195,-

Hovedbilde Traxxas 8555 Driveshaft Center Rear (Fully Assembled)

Traxxas 8555 Driveshaft Center Rear (Fully Assembled)

Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)

269,-

299,-

-10%

Hovedbilde Traxxas 8551 Drive Cup (Use with Driveshaft 8550)

Traxxas 8551 Drive Cup (Use with Driveshaft 8550)

Drive cup (1)/ 2.5x10 CS (use only with #8550 driveshaft)

149,-

Hovedbilde Traxxas 8553 Stub Axle (use with Driveshaft 8550)

Traxxas 8553 Stub Axle (use with Driveshaft 8550)

Stub axle, steel (use with #8550 driveshaft)

135,-

Hovedbilde Traxxas 8554 Rebuild Kit Constant Velocity Steel ...

Traxxas 8554 Rebuild Kit Constant Velocity Steel ...

Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)

49,-

Hovedbilde Traxxas 7529 Servo Mount/Servo Horn

Traxxas 7529 Servo Mount/Servo Horn

This is the Servo Mount/Servo Horn for the Latrax Rally Car from Traxxas. FEATURES Plastic construction Servo mount anchors steering servo to chassis INCLUDES One each Servo Mount/Servo Horn

35,-

Hovedbilde WLToys 144001-Green Buggy RSR 1/14 4WD -Komplett

Hovedbilde WLToys 144001-Green Buggy RSR 1/14 4WD -Komplett

WLToys 144001-Green Buggy RSR 1/14 4WD -Komplett

WLToys Buggy RSR i 1/14-skala i grønn utgave med 4WD. Meget rask bil med mye bruk av solide aluminiumsdeler. Leveres komplett med oppladbart LiPo-batteri og 2.4GHz rattradio. Bilen er 31cm lang og har en toppfart opp mot 50km/h. Det følger med lader så det eneste som trengs i tillegg her er 4stk AA-batterier til radioen. 1/14-skala Bilen er 1/14-skala så den gir en god kombinasjon mellom størrelse og vekt. Drivaksler ut til hjulene er i metall og bilen har blant annet dempertårn og chassis i aluminium. Uavhengig hjuloppheng både foran og bak med kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Batteri Bilen leveres med ett 2S 1500mAh LiPo-batteri med Deans-type kontakt. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AA-batterier, dette må kjøpes i tillegg. Spesifikasjoner Lengde 310mm Bredde 205mm Høyde 110mm Motor 550 Sender/Radio Inkludert 2.4G Batteri 2S LiPo 1500mAh Dean/T-Type Kjøretid ca 7 minutter Ladetid ca 2 timer Rekkevidde 100m+ Skala 1/14

1.495,-

1.595,-

-6%

Hovedbilde Traxxas 5040 Oil Differential 20m Weight

Traxxas 5040 Oil Differential 20m Weight

Oil Differential 20m Weight

179,-

Hovedbilde Traxxas 5374X Talon 3.8

Traxxas 5374X Talon 3.8

Husk at disse har 17mm hex. These are the Talon Tires mounted on Gemini Black Chrome Wheels for use on the Traxxas Maxx and Revo Vehicles. Use with 17mm Splined Wheel Hubs and Nuts, TRX5353X FEATURES: Rubber construction Talon tread Black chrome nylon wheels 5-spoke design INCLUDES: Two Talon Tires premounted on Gemini Black Chrome Wheels REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 152mm (6") Width: 85.75mm (3.4") Hex: 17mm

499,-

Hovedbilde Traxxas 9050 Stub Axle Carriers Rear HD (Pair) Black ...

Traxxas 9050 Stub Axle Carriers Rear HD (Pair) Black ...

Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not fit standard axles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

79,-

Hovedbilde Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...

Hovedbilde Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...

Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...

Traxxas 30WT/350cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 30WT (350cSt) Bottle size: 60ml

99,-

109,-

-9%

Hovedbilde Traxxas 5344X Heavy Duty Servo Saver Spring

Traxxas 5344X Heavy Duty Servo Saver Spring

This is the optional Heavy-Duty Servo Saver Spring for the Traxxas Revo. FEATURES: Steel construction Chrome Plated Conical Shape INCLUDES: One Heavy-Duty Servo Saver Spring REQUIRES: None SPECS: Small Diameter: 12mm (.472") Large Diameter: 22mm (.866") Static Height: 14mm (.551") Diameter of wire: 3mm (.118") COMMENTS: If the Upper & Lower Steering Arms are needed, use TRX 5344-

35,-

Hovedbilde Traxxas 5129 Driveshaft Assembly Rebuild Kit ...

Traxxas 5129 Driveshaft Assembly Rebuild Kit ...

This is the Traxxas Driveshaft Assembly Rebuild Kit for the Revo/Maxx. FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two driveshaft assemblies

89,-

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)

Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1260 This is a 6X12x4mm Ball Bearing Set from Traxxas. FEATURES: Steel construction Blue rubber dirt shields INCLUDES: (2) ball bearings, Part #5117 SPECS: Inside diameter: 6mm Outside diameter: 12mm Width: 4mm COMMENTS: This bearing set is used in the transmission and differentials of the Revo.

55,-

Hovedbilde Traxxas 7462 Shocks Blue GTR XX-Long without springs ...

Traxxas 7462 Shocks Blue GTR XX-Long without springs ...

Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

459,-

499,-

-8%

Hovedbilde RPM 70652 Nerf Bars for the Traxxas 1/10th scale Rally ...

RPM 70652 Nerf Bars for the Traxxas 1/10th scale Rally ...

Nerf Bars for the Traxxas 1/10th scale Rally & LCG Slash 4×4 Quick Notes: – replaces stock Traxxas #7423 – fits both the 4×4 & ST versions of the Rally Description: The chassis layouts of the 1/10th scale Rally & Slash 4×4 changed the original design of the stock nerf bars, making our currently available #80622 & #80625 Nerf Bars unusable with these models. Our LCG nerf bars fix that problem and are a direct, perfect fit! RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis running Traxxas #7423 nerf bars. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons

99,-

Hovedbilde Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover

Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover

Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

-12%

Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...

Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...

RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...

RPM Low Visibility Wheelie Bars for Slash 2WD, Slash 4×4, Losi SCTE & ECX Torment 4×4 Quick Notes: Designed for use with RPM rear bumpers / bumper mounts only Fits the RPM Slash 2wd Rear Bumper Fits the RPM Slash 4×4 Rear Bumper Fits the RPM ECX Torment 4×4 Rear Bumper Fits the RPM Losi SCTE Rear Bumper Mounts A serious issue with most currently available wheelie bars is the inability to use the truck as an off-road vehicle because most wheelie bars tend to stick out too far behind the truck. The RPM Low Visibility Wheelie Bar solves that problem! Since our wheelie bar and included wheels sits inside the protection of the rear bumper, they don’t stick out allowing the truck to function normally when rippin’ up the local track, yet still do their job when the occasional heavy finger pull yanks the front wheels off of the ground! The RPM Low Visibility Wheelie Bar design bolts directly to all RPM Slash bumpers (both 2wd and 4×4), Losi SCTE & ECX Torment 4×4 at the mud flap mounts, while still allowing the use of RPM Mud Flaps (RPM #81012) as well as our Losi SCTE Bumper Mounts (RPM #73312! The RPM Wheelie Bar stays tucked up behind the rear bumper, yet sitting low enough to allow the wheels to touch down once the front end starts catching some serious air! Now any Slash, SCTE or Torment 4×4 owner can pull some sick wheel stands without the fear of grinding crucial rear bumper support components into dust! RPM Low Visibility Wheelie Bars are sold ready to install on an RPM Rear bumper (sold separately) with all necessary mounting hardware and complete instructions for assembly. RPM Low Visibility Wheelie Bars are manufactured from our trademark blend of incredibly strong nylons and backed by our limited lifetime warranty again breakage. Tech Notes: RPM Low Visibility Wheelie Bars are designed for use with RPM Slash 2wd and Slash 4×4 rear bumpers, ECX Torment 4×4 rear bumpers as well as our Losi SCTE Rear Bumper Mounts exclusively and will not work with stock rear bumpers or bumper mounts.

149,-

Hovedbilde Traxxas 2542 Countersunk Machine Hex Drive Screws ...

Traxxas 2542 Countersunk Machine Hex Drive Screws ...

These are the Traxxas Countersunk 4 x 12mm Screws. FEATURES: Metal construction Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

Hovedbilde Traxxas 5827 Hold Down Battery Slash

Traxxas 5827 Hold Down Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash. FEATURES: Black nylon construction INCLUDES: One Battery Hold Down One Retainer Hold Down One Battery Post One Foam Spacer One Angled Body Clip REQUIRES: Installation on the chassis

79,-

89,-

-11%

Hovedbilde Traxxas 6788 Differential Front Pro-Built - 4x4

Hovedbilde Traxxas 6788 Differential Front Pro-Built - 4x4

Traxxas 6788 Differential Front Pro-Built - 4x4

Traxxas 6788 - Pro-Built Front 4x4 Transmission/Differential Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Ford Fiesta® ST Rally Hoss™ 4X4 VXL Rustler® 4X4 VXL Slash 4X4 Ultimate Slash 4X4 VXL Stampede® 4X4 VXL

439,-

469,-

-6%

Hovedbilde Traxxas 3935A Body Clips Angled Black (10)

Traxxas 3935A Body Clips Angled Black (10)

Body clip (mounting clip), angled, 90-degrees (black) (10)

39,-

Hovedbilde Traxxas 6736 Bumper, front/ bumper support Rustler 4x4

Traxxas 6736 Bumper, front/ bumper support Rustler 4x4

Bumper, front/ bumper support Rustler 4x4

79,-