Handlekurv

..er tom!

Vi har også en fysisk butikk som vi har alt på lager av det vi har i nettbutikken.

Hurtigsøk
Avansert søk
Produsenter
Annet

Tekin 2752 RSX ESC 6.5 Gen3 Sensored BL Motor System

Art.nr: 2752
På lager: 1
3.890,-
Vennligst velg

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

This is the Tekin RSX Sensored/Sensorless Electronic Speed Control,
and the Redline GEN3 6.5 Turn Brushless Sensored Motor.

 

 

FEATURES

RSX ESC, Tekin RSX Mod Sensored/Sensorless D2 ESC
Operates brushed or brushless, sensored or sensorless motors
LiPo safe with custom voltage cutoffs
HotWire PC programming port (Hotwire not included & must be purchased
separately, Tekin Hotwire 2.0)
Datalogging capability
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
High speed fan for maximum cooling
Programming features include;
High voltage 6.0/7.4V BEC (battery eliminator circuit)
13 step drag brake/brake/reverse strength
Current limiter (none + 12 steps)
Neutral width (13 steps)
Timing Profiles (5 preset - 2 custom)*
Adjustable throttle and brake minimums
Custom throttle curves
Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
Voltage cutoffs (none, 2S, 3S, Custom)
Timing Boost and Turbo when used with Hotwire
ROAR Race Spec "Blinky" Mode
Save, Load and Share data log and custom ESC setup files*
*Requires Hotwire (sold separately)

Redline GEN3 6.5 Turn Motor, Tekin 6.5 Redline Gen3 Sensored BL Motor 36mm
CNC machined T 6061 billet aluminum heat sink can
For on- or off-road use
12.5mm performance rotor
Dual-plug sensor wire harness for all sensored and sensorless systems
Anodized end-bell plates maximize corrosion and wear resistance
High RPM precision ball bearings
Neodymium sintered magnet
Rebuildable
Adjustable timing
Low resistance solder tabs
Solderless sensor PCB replacement

 

 

INCLUDES

RSX ESC with Fan, two Zip Ties, Capacitor, 12AWG Motor Wires, On/Off
Switch, Receiver Connector and Instructions
Redline GEN3 6.5 Turn Brushless Sensored Motor with Sensor Wire

 

 

SPECIFICATIONS

ESC;
Input Voltage: 4-9 Cells, 2S-3S LiPo
BEC: 6.0V/7.4V, 5.5amps
Motor Limit Brushless Mode 2S: 2.5 Turn 2-pole, 4lb chassis
Motor Limit Brushless Mode 3S: 8.5 Turn 2-pole, 4lb chassis
Motor Limit Brushed 2S: 6 Turn, 36mm Can
Motor Limit Brushed 3S: 12 Turn, 36mm Can
Max Current: 180amps per phase
Timing Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.22 x 1.46 x .82" (31.2 x 37.2 x 21mm)
Weight: 1.5oz (42g)
6.5T Motor;
Input Voltage: 2S all, 3S-10.5 and up
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Weight: 5.6oz (158g)
Motor Diameter: 1.40" (35.85mm)
Motor Length: 1.9" (48.5mm)
Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"