Hopp til innhold
Hjem / Biler / El-biler / Tamiya El-biler / Buggy 4WD / Tamiya 58706 1/10 RC Thunder Shot 2022 no esc
-8%

Tamiya 58706 1/10 RC Thunder Shot 2022 no esc

Art.nr: 58706

2.195,-

2.395,-

- 8%
Tamiya

Tamiya
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Tamiya 58706 1/10 RC Thunder Shot 2022

Following the Fire Dragon, Scorcher and Thunder Dragon, Tamiya welcomes Thunder Shot as a re-released and updated version! This R/C model features some inherited basic specifications from Item 58361 with different CVA oil dampers and the addition of an aluminum motor mount, for better motor performance, and structural rigidity!

• This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987. Length: 390mm, width: 240mm, height: 135mm.
• Polycarbonate body is pre-cut & pre-painted in white and blue, with transparent canopy. (Body requires application of stickers, assembly and painting of figure, and other work.)
• ABS bathtub chassis.
• 4-wheel independent double wishbone suspension with CVA oil dampers uses front stabilizer for a superior ride. Kit includes CVA oil dampers II instead of Type I seen in the original release.
• The front and rear sealed gearboxes contain compact, durable die-cast 3-bevel differential gears for smooth performance.
• Semi-pneumatic spike tires.
• Contains separate rear wing (pre-painted in white).
• Includes a driver figure.
• Type 540 motor included.

Requires:

  • 2-channel radio
  • steering servo and esc.
  • 7.2volt battery with compatible charger.

SPECIFICATIONS

  • Adjustable Gear Ratio Fixed
  • Bearings Plastic bushing
  • Body Material Polycarbonate
  • Body Stickers Included
  • Chassis Material ABS Plastic
  • Construction Type Assembly Kit
  • Differential Type Gear
  • Drive Type 4WD
  • Electronic Speed Control (esc) Not Included
  • Motor 540-brushed type
  • Required To Complete 2-channel radio, steering servo,esc, 7.2volt battery & battery charger
  • Scale 1/10
  • Shock Damper CVA Oil Filled
  • Suspension Fully Independent Double Wishbone
  • Terrain Use Off-Road

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Reservedeler

Trykk her!

Option parts

Trykk her!

Manual

Trykk her!

Relaterte produkter

 

Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC Hovedbilde SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
SkyRC e680 Charger LiPo/LiFe/LiHV, NiMH 80W 240VAC
Art.nr: 100149-01
Copied
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Hovedbilde Vapex NiMH Battery 7,2V 4000mAh Tamiya connector
Vapex NiMH Battery 7,2V 4000mAh Tamiya connector
Art.nr: VP4000SCH6T1
Copied
7.2V 4000 mAh NiMH Stick-Pack Battery with Tamiya Connector Specs: Battery: 6-cell 7.2V NiMH Stick Pack Capacity: 4000 mAh Connector: Tamiya Wires: 14AWG Fast Charge: 4A Peak Slow Charge: 400mAh 12-16 hours Size: L135 x W46.5 x H24 mm Weight: 379 g

369,-

KJØP
Hovedbilde Vapex NiMH Battery 7,2V 3000mAh Tamiya connector
Vapex NiMH Battery 7,2V 3000mAh Tamiya connector
Art.nr: VP3000 Tamiya
Copied
7.2V 3000 mAh NiMH Stick-Pack Battery with Tamiya Connector Battery: 6-cell 7.2V 3000 mAh NiMH Charge: recomended 2-2.5A Max 3.5A Connector: Tamiya Male Wires: 14AWG Length: 138 mm Width: 48 mm Height: 25 mm Weight: 321 g Type of Battery: NiMH Capacity: 3000 mAh Number of cells: 6 Voltage: 7,2 V Power connector: Tamiya      

279,-

299,-

KJØP
-7%
Hovedbilde Tamiya 58704 RC Toyota Land Cruiser 40 no ESC Hovedbilde Tamiya 58704 RC Toyota Land Cruiser 40 no ESC
Tamiya 58704 RC Toyota Land Cruiser 40 no ESC
Art.nr: 58704
Copied
Tamiya 58704 1 / 12 RC Toyota Land Cruiser 40 Pickup Quad Truck (GF-01FT Chassis) Toyota’s Land Cruiser is one of the most recognizable 4WD vehicles in the world, especially the 40, a series which was sold from 1960 to 1984. You can now enjoy this iconic Toyota in a fun all-new way. This R/C kit features the Toyota Land Cruiser 40 mounted on top of the GF-01 with a twist. It includes track units, so you can transvers dirt, snow, gravel, and other terrain in a whole new way! Welcome the GF-01FT) • 1/12 scale R/C model assembly kit. Length: 337mm, width: 250mm, height: 236mm. Wheelbase: 174mm. • This model recreates the Land Cruiser 40 Pick-Up equipped with 3-sided track units in place of tires. • These track units offer superlative traction compared to tires but also enable the model to run even on snow, sand, mud and other testing conditions with stable traction. • The model is based upon the gear-driven 4WD GF-01FT chassis featuring a monocoque frame with power provided by the centrally-positioned motor via front/rear differential gears. • "Square" layout with similar wheelbase and tread measurements provides unique performance. • Choose between two types of track links; standard flat designs, and toothed grouser designs. • A lightweight, polycarbonate body, and driver figure included. • Type 540 motor  • Requires: 2-channel radio and esc, steering servo, 7.2volt battery with compatible charger, and Tamiya PS polycarbonate paint. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type GF-01FT Construction Type Assembly Kit Differential Type Gear Drive Type 4WD No Electronic Speed Control (esc)  Motor 540-brushed type Scale 1/12 Shock Damper Friction type Suspension Fully Independent Double Wishbone Terrain Use Multi-Purpose Required To Complete  2-channel radio steering servo and esc. 7.2volt battery & battery charger Tamiya PS paint.  

3.895,-

4.195,-

KJØP
-7%

Kunder kjøpte også

Hovedbilde Yeah Racing YB0180BX Bearing Set For Tamiya Top Force Hovedbilde Yeah Racing YB0180BX Bearing Set For Tamiya Top Force
Yeah Racing YB0180BX Bearing Set For Tamiya Top Force
RC PTFE Bearing Set with Bearing Oil For Tamiya Top Force Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.   Features: For : Tamiya Top Force Material: Steel Shielding: Metal   Includes: Total 26pcs bearing -YB6011B 5mm x 8mm x 2.5mm (10pcs) -YB6014B 6mm x 13mm x 5mm (16pcs) YA-0215 Bearing Oil (1pc)

249,-

269,-

KJØP
-7%
Hovedbilde Mstyle E60WP Waterproof Electronic Speed Control (ESC) Hovedbilde Mstyle E60WP Waterproof Electronic Speed Control (ESC)
Mstyle E60WP Waterproof Electronic Speed Control (ESC)
Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC) Item no. 542408 The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.   Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 60A Forward Burst Current: 360A Reverse Continuous Current: 230A Reverse Burst Current: 180A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36.5x32x18mm Weight: 39g

399,-

449,-

KJØP
-11%
Hovedbilde Mstyle M-002 R/C Set - Radioset, Servo, Battery and ... Hovedbilde Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...
Mstyle M-002 R/C Set - Radioset, Servo, Battery and ...
Genial til Tamiyabiler! Radio og mottaker. NiMh batteri og USB lader. Servo 6kg Dette settet fra MStyle inneholder radio og mottaker, 6kg analog servo og et 7.2V 2000mAh NiMh-batteri og kompatibel lader. Denne pakken vil være genial for den som har et kit eller eldre bil liggene som trenger utstyr.   R/C Set - Radioset with Servo, Battery and Charger   The new R/C set from MStyle is the ultimate package for anyone looking to build or upgrade their R/C car with high-quality electronics. This all-in-one kit provides nearly everything you need to get your vehicle up and running, whether you"re a hobbyist or a seasoned R/C enthusiast.   What’s included in the set: Radio T-401 2.4GHz: A reliable, easy-to-use transmitter offering precise control for your R/C car. Receiver R-401 4Ch 2.4GHz (Waterproof): A durable and waterproof receiver designed to ensure stable connectivity in various conditions. Servo S-602W 6KG: A powerful and responsive servo with a 6kg torque capacity, perfect for handling sharp turns and quick movements. USB NiMh Charger C-U02: A convenient USB charger for recharging your battery quickly and efficiently. 7.2V 2000mAh NiMh Stick Pack (with Tamiya Plug): A high-performance battery that provides the power you need for extended driving sessions.   Whether you’re assembling a new car or upgrading your current one, this set is designed to simplify the process and deliver a premium R/C experience. Get ready to take your R/C car to the next level with MStyle!     Transmitter T-401 The MStyle T-401 4-Channel radio system uses the latest digital 2.4GHz radio technology to give you trouble-free, total control of your RC car. This is a fully featured, lightweight, 4-channel radio with advanced ergonomic features and total adjustability. Thanks to its crystal-free 2.4GHz technology, you will be able to confidently drive with your friends without worrying about things like frequencies or radio conflicts, and the waterproof R-401 receiver allows you to take your RC vehicle anywhere you can dream! The advanced features of the MStyle T-401 let you set the radio up for your car with custom settings like servo reversing, center trim, dual rate and end point adjustments. Only 4 AA batteries are required to power the MStyle T-401, so it"s light in your hands, and the foam steering wheel makes it comfortable to hold. With the built-in failsafe feature, you will be protected just in case the radio transmitter loses its connection with the receiver. MStyle T-401 Radio Features Digital 2.4GHz FHSS technology 4 Channel Digital on and off switch Foam-covered wheel for extra comfort and grip Servo end point adjustments for steering and throttle Servo reversing Steering dual rate Centre trim (steering and throttle) Audible warnings if you leave the MStyle T-401 switched on as well as battery life! Lightweight (only 4 AA batteries required)     Receiver R-401 The R-401 is the latest receiver for the MStyle T-401 transmitter. Simply bind and drive and have fun with your friends thanks to crystal-free 2.4GHz technology Its tiny size is just 35x26mm and only 17mm high, and its extremely light weight of just 13 grams means it won"t affect the weight balance, no matter where it"s installed. The R-401’s PCB features its own silicone jacket within the Hardcase outer for waterproof protection for a true go-anywhere RC experience, allowing you to drive in mud, rain, and snow! And with failsafe protection, you have peace of mind no matter what RC vehicle you drive! MStyle R-401 Receiver Features: Waterproof R-401 receiver works with MStyle T-401 transmitters Digital Frequency-Hopping Spread Spectrum (FHSS) 2.4GHz technology Simple radio binding steps Adjustable built-in Signal loss failsafe Run your RC models kit with other drivers without worrying about frequencies! 4-Channel A built-in light controller on a separate channel will allow for the addition of headlights and taillights on suitable models with the Maverick LED Light Set (#150465) or HPI Warm White LED Kit (#160560) Ideal for electric RC vehicles with a 6V 35mA minimum BEC power input     C-U02 USB Charger This USB Delta-Peak Charger is a simple and easy to use charger for 2-8 Cell NiMH battery packs. A USB Adaptor with an output of at least 2A is recommended. Specifications: 2-8 Cell NiMH (600-2500mAh) Charging range USB input 5V 1A, (2A Recommended) Delta-Peak Charging Tamiya Battery connector     S-602W Servo This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles). Features: Operating Voltage: 4.8-6V 4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm 6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm Servo Spline: 25T Dimensions: Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, & cable outlet) Mounting tab hole centres: 49.5.0x10mm Weight: 46g (excluding servo horn)

795,-

895,-

KJØP
-11%
Hovedbilde
"BULK" Traxxas 3350R Velineon VXL-3s Brushless Power ...
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC og Velineon 3500 motor) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 4mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

1.995,-

2.395,-

Ikke på lager
-17%
Hovedbilde Hitec HS-311 Servo Standard U
Hitec HS-311 Servo Standard U
This is a Hitec servo that will work with all modern radio systems  including Futaba J, Hitec, JR and Airtronics Z.     FEATURES Heavy-duty resin gear train  Nylon bushing  3-pole ferrite motor   INCLUDES One Deluxe Standard servo with nylon bushing.  One white small X-shaped servo horn.  One white adjustable servo horn.  One white offset straight servo horn.  One red X-shaped heavy-duty servo horn.  Four brass eyelets.  One white plastic wheel servo horn.  Four black rubber vibration isolators.  Four M2x14 mounting screws   REQUIREMENTS Universal Futaba J, S/JR/Airtronics Z plug compatible radio system SPECIFICATIONS  Speed: 0.19 sec/60° at 4.8V  Speed: 0.15 sec/60° at 6.0V  Torque: 3.0 kg-cm at 4.8V  Torque: 3.7 kg-cm at 6.0V  Length: 1.60" (41mm)  Width: 0.80" (20mm)  Height: 1.40" (37mm)  Weight: 1.5oz (43g)   NOTE: This is a non-ball bearing servo.

209,-

219,-

KJØP
-5%
Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ... Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ... Hovedbilde Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ...
Yeah Racing STEEL BEARING SET (18PCS) FOR TAMIYA M05 / ...
Yeah Racing RC Ball Bearing Set     Feature:   For : Tamiya M05 / M05 Ver. II Pro / M06 Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (6pcs) YB6014B  5mm x 11mm x 4mm (12pcs)    Include:   Total Bearing (18 Pcs) RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Ball Bearing For Tamiya M05 Pro / M05 Ver.II Material: Metal   Includes: Bearing (18Pcs) Bearing Oil (15ml) #YA-0215   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

149,-

169,-

KJØP
-12%
Hovedbilde Tamiya 10555028 Upright 58063/70 (2)
Tamiya 10555028 Upright 58063/70 (2)
This is the replacement upright set for the Tamiya Lunch Box and the Midnight  Pumpkin. FEATURES These uprights are actually the white plastic knuckle arms and the  metal front axles assembled together.   INCLUDES 2 uprights

79,-

KJØP
Hovedbilde Tamiya 54579 1150 Bearing(16stk)
Tamiya 54579 1150 Bearing(16stk)
This is a package of sixteen 5x11mm Ball Bearings from Tamiya. FEATURES Replaces plastic bushings in many Tamiya entry level kits  May also be used anywhere a ball bearing this size is needed INCLUDES Sixteen 5x11mm Ball Bearings SPECIFICATIONS  Inner Diameter: 5mm  Outer Diameter: 11mm  Thickness: 4mm

249,-

269,-

KJØP
-7%
Hovedbilde Traxxas 3953 Spur Gear 1.0P 36T Revo
Traxxas 3953 Spur Gear 1.0P 36T Revo
            This is the replacement 36T Module 1.0 Pitch for                   the Traxxas Nitro Revo Monster Truck. FEATURES: Nylon Construction           Black in Color INCLUDES: One Black Nylon 36T Module 1.0 Pitch Spur Gear REQUIRES: Assembly onto Vehicle

39,-

KJØP
Hovedbilde TAMIYA 47457 RC FIRE DRAGON (2020) inkl ESC Hovedbilde TAMIYA 47457 RC FIRE DRAGON (2020) inkl ESC
TAMIYA 47457 RC FIRE DRAGON (2020) inkl ESC
TAMIYA RC FIRE DRAGON (2020) The Fire Dragon was the machine used by the main character of the manga series "Radicon Boy" and was first released as an R/C model back in 1989. Featuring a unique body styling and parts for a driver figure, this colorful buggy is a great way for beginners to get started with this hobby and for veterans of R/C to remind themselves of their childhood years. This updated re-release edition incorporates some updated parts to improve durability. User-Friendly 4WD Drivetrain Durable chassis features motor mounted amidships, which powers all four wheels via a shaft drive system. The simple, yet effective, suspension is made up of upper I-arms and lower H-arms for an efficient double wishbone setup. CVA oil dampers at all four corners help absorb shocks from rough terrain while differential gears in the front and rear gearboxes help put the power to the ground smoothly. • Length: 390mm, width: 240mm, height: 139mm. • The chassis consists of a tough bathtub frame plus front and rear gearboxes with suspension attached. • 4-wheel double wishbone suspension uses CVA oil dampers for a superior ride, and a front stabilizer for a firm setup. • A new aluminum motor mount gives improved rigidity. • Front and rear sealed differentials are die-cast 3-bevel types for superior handling feel. • Adjusters in the 3-piece steering tie-rod setup to alter toe. • Body is molded in polycarbonate and pre-painted red. Just apply stickers to complete it. • Includes 540-type motor. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit). Requires: 2-Channel Radio Servo 7.2-7.4volt battery pack & compatible charger. SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Motor 540-brushed type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-wheel fully independent double wishbone Terrain Use Off-Road  

2.495,-

2.795,-

KJØP
-11%
Hovedbilde TAMIYA 47458 RC THUNDER DRAGON (2021) Hovedbilde TAMIYA 47458 RC THUNDER DRAGON (2021)
TAMIYA 47458 RC THUNDER DRAGON (2021)
TAMIYA RC THUNDER DRAGON (2021) This is a re-issue of the classic Thunder Dragon buggy originally released in 1988. The classic buggy utilizes shaft-driven 4WD and smooth, ground hugging suspension providing a super-fun driving experience. The stylish Thunder Dragon body which appeared in a classic R/C comic in Japan, is an exciting re-release for R/C fans of all ages and abilities. • 1/10 scale R/C model assembly kit. Length: 390mm, width: 240mm, height: 130mm. Wheelbase: 260mm. • The chassis is based around an ABS plastic bathtub frame for excellent durability and ease of maintenance. • 4-wheel double wishbone suspension uses CVA oil shock-dampers and a front stabilizer for a superior ride. • Features shaft-driven 4WD with front and rear die-cast 3-bevel differentials for smooth, superior handling feel. • Semi-pneumatic spike tires give great grip, and are paired with large-diameter ABS wheels. • Thunder Dragon body is molded in polycarbonate, with non-canopy sections pre-painted in silver. It is pre-cut for convenience. • Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. • Includes 540 brushed type motor. Requires: 2-channel radio Steering servo 7.2-7.4volt battery pack and compatible charger. SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Motor 540-brushed type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-wheel fully independent double wishbone Terrain Use Off-Road

2.495,-

2.795,-

KJØP
-11%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png