Hopp til innhold
-11%

TAMIYA 47457 RC FIRE DRAGON (2020) inkl ESC

Art.nr: 47457

2.495,-

2.795,-

- 11%
Tamiya

Tamiya

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

TAMIYA RC FIRE DRAGON (2020)

The Fire Dragon was the machine used by the main character of the manga series "Radicon Boy" and was first released as an R/C model back in 1989. Featuring a unique body styling and parts for a driver figure, this colorful buggy is a great way for beginners to get started with this hobby and for veterans of R/C to remind themselves of their childhood years. This updated re-release edition incorporates some updated parts to improve durability.

User-Friendly 4WD Drivetrain
Durable chassis features motor mounted amidships, which powers all four wheels via a shaft drive system. The simple, yet effective, suspension is made up of upper I-arms and lower H-arms for an efficient double wishbone setup. CVA oil dampers at all four corners help absorb shocks from rough terrain while differential gears in the front and rear gearboxes help put the power to the ground smoothly.

• Length: 390mm, width: 240mm, height: 139mm.
• The chassis consists of a tough bathtub frame plus front and rear gearboxes with suspension attached.
• 4-wheel double wishbone suspension uses CVA oil dampers for a superior ride, and a front stabilizer for a firm setup.
• A new aluminum motor mount gives improved rigidity.
• Front and rear sealed differentials are die-cast 3-bevel types for superior handling feel.
• Adjusters in the 3-piece steering tie-rod setup to alter toe.
• Body is molded in polycarbonate and pre-painted red. Just apply stickers to complete it.
• Includes 540-type motor.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit).

Requires:

  • 2-Channel Radio
  • Servo
  • 7.2-7.4volt battery pack & compatible charger.

SPECIFICATIONS

  • Adjustable Gear Ratio Fixed
  • Bearings Plastic bushing
  • Body Material Polycarbonate
  • Body Stickers Included
  • Chassis Material ABS Plastic
  • Construction Type Assembly Kit
  • Differential Type Gear
  • Drive Type 4WD
  • Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
  • Motor 540-brushed type
  • Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint.
  • Scale 1/10
  • Shock Damper CVA Oil Filled
  • Suspension 4-wheel fully independent double wishbone
  • Terrain Use Off-Road

 

Produsent

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Relaterte produkter

 

Art.nr: 100149-01
Copied
SkyRC E680 er en computerlader som dekker de fleste ladebehov, den har en makseffekt på 80W og maks ladestyrke er 8.0A. Laderen har også innebygget balanserer og det følger med ladekontakt med XT60-plugg.  SkyRC E680 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen. Laderen har max ladestyrke på 80W/8A, så ett 2cell LiPo kan da lades på 8A, 3cell LiPo kan da lades på ca 7A. Ett 6cell LiPo på ca 3,6A. Det følger med 220V strømkabel, kabel med krokodilleklemmer for tilkobling til eksempelvis 12V bilbatteri, XT60-ladeledning og 2-6S XH-balanseringsbrett.(SK-600020-04) Spesifikasjoner: Vekt 390gram Innspenning DC 11-18V Innspenning AS 100-240V Display LCD Størrelse 135x110x60mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-8,0A Maks Ladeeffekt 80W Utladeeffekt max 10W Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge.  SkyRC e680 Multi-Chemistry Charger/Discharger Specifications: AC Input: 100-240Volt AC DC Input: 11-18Volt DC Circuit Power: Max. Charge Power 80W Max. Discharge Power 10W Charge Current Range: 0.1-8A Discharge Current Range: 0.1-2A Current Drain For Balancing LiPo: 300mA/cell NiCd/NiMH Battery Cell Count: 1-15 cells LiPo/LiHV/LiFe/Lilon Cell Count: 1-6 cells Pb battery voltage: 2-20V Net Weight: 390 g Dimensions: 135 x 110 x 60 mm

699,-

749,-

KONTAKT
-7%
Art.nr: VP3000 Tamiya
Copied
7.2V 3000 mAh NiMH Stick-Pack Battery with Tamiya Connector Battery: 6-cell 7.2V 3000 mAh NiMH Charge: recomended 2-2.5A Max 3.5A Connector: Tamiya Male Wires: 14AWG Length: 138 mm Width: 48 mm Height: 25 mm Weight: 321 g Type of Battery: NiMH Capacity: 3000 mAh Number of cells: 6 Voltage: 7,2 V Power connector: Tamiya      

279,-

299,-

KJØP
-7%
Art.nr: VP4000SCH6T1
Copied
7.2V 4000 mAh NiMH Stick-Pack Battery with Tamiya Connector Specs: Battery: 6-cell 7.2V NiMH Stick Pack Capacity: 4000 mAh Connector: Tamiya Wires: 14AWG Fast Charge: 4A Peak Slow Charge: 400mAh 12-16 hours Size: L135 x W46.5 x H24 mm Weight: 379 g

369,-

KJØP
Art.nr: 47442
Copied
Relansering av legenden Terra Scorcher som først ble utgitt i 1988. -Har firehjulsdrift og gode off-road kjøreegenskaper.  -Bodyen er i høyholdbart polykarbonat.  -Modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker 7.2V Ni-Mh batteripakke og lader Styreservo Superlim (CA Lim) Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Chassis type: Vintage Skala: 1/10 Terreng: Off-Road Drift: 4WD Firehjulsdrift Fartsregulator: TBLE-02 (inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: Børstemotor (inkludert) Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Lakk/maling anbefalt av Tamiya: PS-4 Blue PS-12 Silver XF-1 Flat Black XF-15 Flat Flesh Informasjon fra Tamiya: A legend returns – the Terra Scorcher has been a trusty off-road assembly kit for R/C enthusiasts since 1988! It makes a welcome comeback in the shape of this LIMITED-EDITION kit, which features a modern chassis and some updates to the livery marking scheme.  • 1/10 scale R/C model assembly kit.  • Polycarbonate body is paired with the 4WD chassis that was previously employed on the re- issued Fire Dragon (Item 58403), with further upgrades.  • Updated marking stickers keep the flavor of the 1988 original.  • Shaft-driven 4WD drivetrain provides efficient and reliable drive via universal joints and 3-bevel gear differentials in the front and rear sealed gearboxes, and enhanced by Full Ball Bearings.  • The streamlined double wishbone suspension employs upper I-arms and lower H-arms with CVA oil dampers. Upper arms are adjustable.  • Stabilizers front and rear ensure nimble handling and precision.  • Includes: Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)  • Required Items: 2-Channerl radio, steering servo, 7.2volt battery pack with compatible charger, and Tamiya PS paint.  Dette er rerelease av orginalen fra 1988 Nødvendig tilbehør: Radio/Motaker 1 x servo Batteri/Lader Ønsket lakk til lexan karosseri PS og Detaljlakk for figur X-XF Dette er en oppdatert releaseversjon av Terra Scorcher, som originalt ble utgitt første gang i 1988. Chassiset består av en lett og tøff badekarramme pluss firehjulstrekk, kraftige bærearmer med CVA oljedempere for en overlegen kjøretur, og justerbare stag på øvre bærearm/camberen. Swaybars kommer som standard foran og bak, og du kan bruke justeringer i det tredelte festestaget for å endre toe. Karosseri og Vinge er støpt i klart polykarbonat(lexan, med klistremerker inkludert for å påføre logoene, og grippy knastedekk avrunder det med perfekt gripeevne på de fleste underlag.

4.995,-

Kunder kjøpte også

1/6 Dumont Snd/Snw Tires F/R MTD 24mm Black Raid(2)   Overview This is a pair of Dumont Paddle Sand/Snow Tires Mounted on Raid 5.7" Black Wheels . Are you ready for the most extreme Paddle tires Pro-Line has ever made for Monster Truck? Introducing the Dumont 5.7" tires that have been designed from the ground up for your X-MAXX® and KRATON™ 8S to sling sand and snow further than ever before and look good doing it! The Dumont 5.7" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. The Raid 5.7" Black Wheel features a 24mm hex with the standard 1/5 scale through-hole to fit most 1/5 scale vehicles and includes machined aluminum wheel washers to fit onto the popular X-MAXX® platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and has the bold style to match. The Dumont Paddle tires are glued to the big diameter Raid wheel for the ultimate in lightweight performance. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA! Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your X-MAXX® or KRATON™ 8S Truck today! Pro-Tip: When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires. Please note: All tires & wheels are sold in pairs, unless otherwise noted PRO1020210 | Dumont Paddle Sand/Snow Tires Mounted on Raid 5.7" Black Wheels (2) for X-MAXX®, KRATON™ 8S & Other Large Scale 24mm Hex Vehicles Front or Rear X-MAXX® is a registered trademark of Traxxas® L.P.   Features Extreme Paddle Tires for Sand and Snow Latest Paddle Tire Technology - Large Offset V-shaped Tread Pro-Line P-L Logos Embedded into Tire Carcass 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Machined Aluminum Wheel Washers Included to Fit the X-MAXX® Platform Made from Very Stiff and Long-lasting Paddle Tire Rubber Tires Made in the USA, since 1982 Fits KRATON™ 8S (ARA110002 and ARA5208) X-MAXX® Other Large-Scale Vehicles with 24mm Hex    

1.199,-

1.399,-

KJØP
-14%
  This is the Tamiya Tractor Truck Multi-Function Control Unit (MFC)                   with integrated Electronic Speed Control.              For use on Tamiya 1/14 scale R/C tractor trucks and                    the #56307 Mercedes 1850L delivery truck. FEATURES: Twenty four radio-controlled sounds including, alarms, engine             starting idling and revving, coupler attachment, air brake and more           Nine different types of lights and vibration synchronized with             engine sounds including, head and tail lights, turn signals, speed             indicators, fog, roof, hazard, auxilliary, and back-up lights           Special Operations add five extra features including, engine stop/             start switching, horn/support leg switching, light on/off switching             turn signal/hazard lamp switching, and running/revving switching           2-3/8" (60mm) diameter speaker emits authentic sounds           Electronic speed control enables low speed running for semi coupling           Coupler unit controls sound for loading and unloading of trailer,             speed control raises power during towing mode           Control unit for volume and light adjustment           Vibration unit uses specialized vibration motor with two types of             counterweights INCLUDES: One Tamiya Tractor Truck Multi-Function Control Unit with speaker,             pre-wired lights, vibration, coupler, control units, electronic             speed control and instructions REQUIRES: Tamiya tractor trailer using four channel stick radio, two channel              pistol grip radio with steering wheel will not operate unit. COMMENTS: Designed to be used with four channel stick control radios with self-             neutral system such as those from Futaba, JR, or ACOMS.  Different             brands of radios may not operate unit at maximum efficiency.

3.695,-

4.295,-

Ikke på lager
-14%
The Nissan Z is one of Japan's representative sports cars and the 6th generation was released in December 2008. Although the wheelbase was shortened by 100mm from the previous model, the car's long-nose, short-deck design was kept and the fenders were pushed out to create its muscular, athletic look. The car is powered by a 3.7 liter DOHC V6 engine, and the 6-speed manual transmission version has the world's first SynchroRev Match system which can adjust the engine's RPM during downshifts for a smooth heel-and-toe effect, making it more enjoyable to drive. Feature: 1/10 R/C assembly model kit. The polycarbonate body depicts the muscular form of the 370Z. Length: 451mm, Width: 188mm, Height: 130mm, Normal Wheelbase: 257mm.-26mm width wheels and tires with tread pattern included. Based on the fun to drive TT-01 Type-E Chassis for effortless assembly. 4WD shaft driven bathtub chassis with 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes. LEDs to depict headlights (white) and taillights (red) are included. Sticker sheet and masking seals included. Side mirrors, rear wings, and metal-plated light cases are reproduced with separately molded parts. Include: TT-01 Chassis Kit(1pc) Sliver Can Motor(1pc) TEU-104BK ESC(1pc) Wheel(4pcs) Tires(4pcs) Decals Instruction Require: Radio: 2-Channel (1Pc) Servo For 1:10 (1Pc) Size around 40.4 x 19.8 x 36mm Battery: Sub-C 6-cells or Li-Po 2Cells Stick Packs with standard Tamiya connector Charger for car battery: For Ni-Mh Sub-C/ Li-Po 2Cells Stick Packs Paint: PS for Polycarbonate/TS for ABS

1.795,-

1.995,-

KJØP
-10%
This is the Brushless Electric Powered, 2.4GHz Radio Controlled, RTR Vaughn Gitten Jr. Signature Edition Savage XS Flux Mini Monster Truck from HPI. FEATURES Chassis: Aluminum TVP (Twin Vertical Plate) with integrated rollhoop Drive: Four wheel Transmission: Metal gear Differentials: Four metal gears Brushless Motor: FLUX MMH 4000Kv with 4-pole high-torque rotor Electronic Speed Control: FLUX EMS-3S Battery Box: Fits standard LiPo batteries and 6-cell NiMH stickpacks Radio: HPI 2.4GHz TF-40 with RF-40WP receiver SS20WR waterproof steering servo Body: GT2X trimmed with Vaughn Gitten Jr. competition graphics and all sponsor decals applied, universal fit body mounts Shocks: Oil-filled, composite plastic body Shock Towers: Composite plastic Suspension: Aluminum front and rear braces, stainless steel bulkhead lower plates Wheels: Green plastic 2.2" Classic King, 12mm hexes Tires: Power Pin, white firmness compound Ball Bearings: Full set Bumpers: Front and rear skid plate type Pinion Gear: 28T Spur Gear: Drive gear, metal 49T/idler gear 32T-56T INCLUDES Preassembled Savage XS Flux Mini Monster Truck w/2.4GHz Radio System, 4400Kv Motor, ESC, Trimmed and Painted Body & Instruction Manual REQUIREMENTS Track and maintenance equipment SPECIFICATIONS Vehicle; Length: 14.17" (360mm) Width: 11.02" (280mm) Height: 6.29" (160mm) Wheelbase: 8.85" (225mm) Weight: 4.73lbs (2.15kg) without batteries Body; Length: 12.79" (325mm) Width: 5.90" (150mm) Height: 3.74" (95mm)

4.495,-

4.895,-

KJØP
-8%
TAMIYA RC COMICAL GRASSHOPPER A Legend Re-Imagined The original Grasshopper needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Grasshopper is still among Tamiya's best-selling kits to this day. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. 1/10 scale R/C model assembly kit. Superb performance both on- and off-road. Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up. Polycarbonate body. Sticker design based on the original Grasshopper. Suspension arms feature multiple damper attachment holes for easily adjustable performance. New 2-piece wheels molded in durable ABS. New tire design, with rib pattern front and block pattern rear. Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) FEATURES Chassis: WR-02CB plastic monocoque with wheelie bar Drive: Rear wheel Differential: Gear type Motor: 540 brushed Electronic Speed Control: Tamiya TBLE-02S operates sensored brushless motors and brushed motors (21.5 turn brushless motor limit, 23 turn brushed motor limit) Body: Clear molded polycarbonate with headlight cases that allow the installation of 5mm LEDs (LED lights not included and must be purchased separately) Shocks: Oil-filled mini CVA with white plastic bodies Suspension: 4-wheel double wishbone, suspension arms feature multiple shock attachment holes Steering: Two-piece tie rod Wheels: Two-piece ABS plastic, green in color Tires: Rib pattern front, block pattern rear Front Bumper: Spring loaded plastic   INCLUDES Tamiya 1/10 scale Electric Powered Comical Grasshopper with 540 size brushed Motor, ESC, Tires, 2-pc Wheels, Body, 18 tooth Pinion Gear, Driver Figure and Instruction Manual REQUIREMENTS Radio: 2-channel with steering servo Battery: 7.2V round pack, square shaped batteries will not fit battery compartment Battery Charger: For selected battery pack Polycarbonate safe spray or brush-on paint Track and maintenance equipment SPECIFICATIONS Length: 14" (356mm) Width: 9.6" (244mm) Wheelbase: 6.7" (170mm)  

2.195,-

2.295,-

KJØP
-4%
TAMIYA RC COMICAL HORNET The original Hornet needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Hornet is still among TamiyaΓÇÖs best-selling kits to this day. Now the legend is re-imagined as the Comical Hornet, with a new body inspired by the famous original. The re-imagined body, which includes a newly designed driver figure, sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. WR-02CB Chassis - Great Fun Awaits! The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save hassle in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while underguard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive. • 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm. • Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up. • Polycarbonate body with sticker design based on the original Hornet. • Orange and white 2-piece wheels use bubble tires (front: ribbed, rear: round block) • Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components. • Comes with a newly designed helmeted driver figure with hands gripping a steering wheel. • Suspension arms feature multiple damper attachment holes for easily adjustable performance. • Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) • Includes 540-type brushed motor. • Internal Gear Ratio: 18.3:1 • Includes wheelie bar.   Requires: 2-channel radio steering servo 7.2-volt battery pack & chargera Tamiya PS/TS paint. NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment.   SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Chassis Type WR-02CB Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Led Lights Not Included, but sold separately Motor Brushed 540 Type Required To Complete 2-channel radio, steering servo, 7.2volt round case battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-wheel fully independent double wishbone Terrain Use Multi-Purpose  

2.195,-

2.295,-

KJØP
-4%
Castle Mamba Micro-X Crawler Edition ESC with 1406-2280KV Sensored Motor Combo Putting the X in Extreme! The Mamba Micro X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the lightweight, small footprint Mamba Micro X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 3.6kg on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 1.8kg. If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC with the same motor. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation. Use of an external BEC is recommended if running a high power or digital servo.   Waterproof : Yes Telemetry Capable : Yes Data Logging : No Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : Yes This SPECIAL EDITION of the Mamba Micro X includes solder posts with 16 AWG wire for the motor connection; it also includes the matching 4mm female bullets to pair with the included 1406-2280kv sensored brushless motor.  The Auxiliary Advantage Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Try out the brand new Crawler Mode for incredible versatility! Telemetry Capability The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.  Package Includes: Crawler Edition Mamba Micro X w/solder posts 1406-2280kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 3S LiPo (12.6V) BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but can be disabled for racing On/Off Switch: Yes, waterproof* Cooling Fan: No Length: 41mm Width: 19mm 28mm Weight (without wires): 34g Connectors: 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes Castle sensor harness. Items Needed for Operation: Battery Connector required, Castle 4mm polarized Connectors, T- Plugs, or Traxxas Power Connect are recommended. Product Use Statements:  Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty. Recommended battery capacity is at least 1500mAh and 25C. Castle recommends running the highest mAh that will fit in your vehicle and the highest C rating you can afford. The Crawler Edition Mamba Micro X has solder posts for the motor connections; includes 13 gauge wire with 4mm female bullets that connect directly to the included 1406-1900kv motors and the battery input wires are bare. You must solder the connector to the wires on the ESC. See Items Needed for Operation for recommendations. Application Guidelines: Low speed crawling or trail running in vehicles weighing up to 3.6kg. If you're looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor. Recommended Motors: Combo includes 1406-1900kv sensored brushless motor. Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style; 1.8kg for more aggressive driving styles. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Motor specs: Input Voltage Range: 2S-3S LiPo Kv: 2280 Max. RPM: 100,000 Length: 49.5mm Diameter: 36mm Weight (w/wires): 197g Shaft Length: 15mm Shaft Diameter: 1/8" (3.17mm) Optional 5mm rotor replacement available Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 2S-3S weighing less than 3.6kg. It can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style like rock crawling and trail running; 1.8kg for more racing and aggressive driving styles. Tech Notes:  Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

2.395,-

2.595,-

KJØP
-8%
Traxxas High-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx® Tough! The Traxxas Maxx redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx’s extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. QUICK FEATURES ON MAXX LED LIGHT KIT: Compatible with Velineon VXL-4s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. MAXX LED LIGHT KIT INCLUDES: High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-4s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures. High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-4s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance. Technology Customize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

1.239,-

1.349,-

KJØP
-8%
TAMIYA RC COMICAL FROG The original FROG needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original FROG is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical FROG, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. WR-02CB Chassis - Great Fun Awaits! The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save time in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while under guard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive. 1/10 scale R/C model assembly kit. Length: 356mm, Width: 244mm, Height: 195mm, Wheelbase: 170mm Tire Width/Diameter 46/95mm (Front), 56/98mm (Rear) Tread 189mm (Front), 186mm (Rear) Monocoque Frame Chassis 3-Bevel Differential Gear 2-Piece Steering Linkage 4-Wheel Double Wishbone Suspension Front and Rear CVA Oil Dampers Gear Ratio = 18.3:1 Type 540 Motor included FEATURES Chassis: WR-02CB plastic monocoque with wheelie bar Drive: Rear wheel Differential: Gear type Motor: 540 brushed Electronic Speed Control: Tamiya TBLE-02S operates sensored brushless motors and brushed motors (21.5 turn brushless motor limit, 23 turn brushed motor limit), Tamiya battery plug Body: Clear molded polycarbonate Shocks: Oil-filled mini CVA with plastic bodies Suspension: 4-wheel double wishbone, suspension arms feature multiple shock attachment holes Steering: Two-piece tie rod Wheels: Two-piece ABS plastic, orange in color Tires: Rib pattern front, block pattern rear Front Bumper: Spring loaded plastic INCLUDES Tamiya 1/10 scale Electric Powered Comical Frog with 540 size brushed Motor, ESC, Tires, 2-pc Wheels, Body, 18 tooth Pinion Gear, Driver Figure and Instruction Manual REQUIREMENTS Radio: 2-channel with steering servo Battery: 7.2V NiMH stick pack with Standard plug Battery Charger: For selected battery pack Polycarbonate safe spray or brush-on paint Track and maintenance equipment SPECIFICATIONS Length: 14" (356mm) Width: 9.6" (244mm) Height: 7.7" (195mm) Wheelbase: 6.7" (170mm) Internal Gear Ratio: 18.3:1 Tread: Front 7.4" (189mm), Rear 7.3" (186mm), distance between center of tires measured side-to-side Tire Width: Front 1.8" (46mm), Rear 2.2" (56mm) Tire Diameter: Front 3.7" (95mm), Rear 3.8" (98mm)  

2.195,-

2.295,-

KJØP
-4%
TAMIYA RC COMICAL HOTSHOT This R/C model assembly kit creates a 4WD buggy, with a lightweight and durable stylized polycarbonate version of the legendary Hot Shot body. The reimagined comical body comes pre-painted in red and all that is needed is the application of the included stickers, and voila! A new, Comical Hot Shot which pays homage to Tamiya’s classic 1985 Hot Shot kit! The GF-01CB chassis in which the body sits on top of is a gear-driven unit that provides a thrilling drive and super wheelies when you jam on the throttle. GF-01: Seriously Stable 4WD This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and WR-02 or GF-01 Hop-Up Option parts are available to hop-up your model. • 1/10 scale R/C model assembly kit. • Includes a lightweight and durable stylized polycarbonate version of the Hotshot body and wing, developed specially for this model. The body is pre-painted in PS-2 Red. Stickers based upon the 2007 re-issue Hotshot are included for decoration. • Stylish bumper and muffler parts are included, as well as dedicated side guard components. • Separately sold 5mm LEDs can be used to light up the model. Light pods are included. • ST block bubble tires have stepped block patterns (width/diameter: front 45/99mm, rear 55/99mm). • The GF-01CB chassis offers efficient gear-driven 4-wheel drive. • ABS two-part wheels have red and white spoke parts. • CVA Super Mini oil dampers molded in red ensure your ride has superior cushioning. • A rear wheelie bar lets you perform thrilling wheelies by slamming on the throttle. • Includes 540-brushed type motor. • Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Requires: 2-channel radio steering servo 7.2-7.4volt battery pack and compatible charger. • NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment. SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material Polycarbonate pre-painted body Body Stickers Included Chassis Material ABS Plastic Chassis Type GF-01CB Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Motor 540-brushed type Required To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger Scale 1/10 Shock Damper CVA Oil Filled Suspension Fully Independent Double Wishbone Terrain Use Multi-Purpose  

2.795,-

2.995,-

KJØP
-7%
Tamiya 57412 SU Mudmad   Tamiya welcomes a new model kit on the super-compact SW-01 chassis, called the “MudMad!” The body is inspired by off-road vehicles and was dreamt up by designer Takayaki Yamazaki who modelers will remember from the Dual Ridge and other Tamiya vehicles.   About the Model • This is a 1/24 scale R/C model assembly kit. Length: 190mm. • The brand new off road car-inspired body is molded in lightweight and durable polycarbonate. It is magnet-secured for swift attachment and detachment, and comes pre-painted in PS-3 Light blue. • The SW-01 chassis is a compact unit which promises bundles of fun! • The body leans in the direction in which the model steers, achieving remarkably tight turning circles and helping to suppress roll. • Strut style suspension gives a perky drive. • A central Type 370 motor transmits power to the front and rear in a gear-driven 4WD setup. • Can be used with standard size servos and R/C equipment despite its compact nature. • Compatible with Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) as a power source. A battery case is available in our Spare Parts line-up for drivers who want to power their model with R6/AA/UM3 batteries. • A central Type 370 motor transmits power to the front and rear in a gear-driven 4WD setup. • Can be used with standard size servos and R/C equipment despite its compact nature. • Compatible with Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) as a power source. A battery case is available in our Spare Parts line-up for drivers who want to power their model with R6/AA/UM3 batteries. SPECIFICATIONS Adjustable Gear Ratio                                      Fixed Bearings                                                           Plastic bushing Body Material                                                   Polycarbonate Body Stickers                                                   Included Chassis Material                                              ABS Plastic Chassis Type                                                   SW-01 Construction Type                                            Assembly Kit Differential Type                                               Gear Drive Type                                                       4WD Electronic Speed Control (esc)                       Sold Separately Motor                                                              130-Size Required To Complete                                    2-channel radio, steering servo, 4 AA batteries Scale                                                              1/24 Shock Damper                                                Friction type Terrain Use                                                      Multi-Purpose

1.295,-

1.395,-

KJØP
-7%
Joysway Bullet V4 Deep Vee Brushless Power Speed Boat - ARTR Dette er ARTR-utgaven leveres uten batteri og lader, den behøver 2stk 2S 4000mah 35C+ eller tilsvarende med XT60-plugger.Sender trenger 4stk AA-batterier. This is the new Bullet Offshore brushless RC boat with updated V4 graphics. The boat uses a powerfull brushless outrunner motor that can push it to a top speed of max 60km/h on two 2S LiPo batteries in series (not included). SPECIFICATIONS: Hull Length: 640 mm Total Length: 730 mm Width: 180 mm Weight: 1.14kg (model only) Hull Material: Plastic Molded with colorful painting decal stickers Maximum possible top speed: 60km/h WHAT'S INCLUDED: 2.4G 2CH digital proportional radio control system Water-cooled 2815 outrunner brushless motor 60A water cooled & waterproof brushless ESC with BEC (2-4S LiPo, 70A peak load (10sec), BEC: 5V/2A) Powerful steering 37g servo (waterproof) CNC aluminum alloy rudder Shaft drive system: 4mm flex cable drive 3 Blade aluminium propeller - P1.4x37mm Display boat stand REQUIREMENTS: LiPo balance charger and XT60 adapter (Not included) 4x AA Alkaline batteries for transmitter (Not included) Spec: Boat Type: Race Boat Delivered as: ARTR Hull Type: V-Shape Operating Mode: Electric Suitable For: Beginners , Experienced Hull Length: 640 mm Material: Molded Plastic Total Length: 740 mm Weight: 1140 g Width: 180 mm Drive: Direct Drive with Flex Cable ESC: 60A BL Water cooled Transmitter: 2-channel 2,4GHz Motor Type: Brushless Motor/Engine: BL2815 Water cooled Battery: Not Included Also Including: Boat Stand , Servo Needed To Complete: 2 x 2S Li-Po Battery , 4 AA batteries for transmitter , Charger

3.595,-

3.795,-

KJØP
-5%
   This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Italian Red Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
Yeah Racing RC Ball Bearing (5x8x2.5mm) 10pcs #YB6011M/S10 Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011MS/10) Ball Bearing (5x8x2.5mm) Material: Metal

89,-

99,-

KJØP
-10%
Disse lagerene er samme størrelse som Tamiya 850 Yeah Racing RC PTFE Bearing (5x8x2.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011BS/10) RC Telfon Bearing (5x8x2.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

79,-

89,-

KJØP
-11%
Yeah Racing RC Ball Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014MS/10) RC Ball Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
18 tooth pinion gear for Tamiya 540 motors, including the Tamiya Grasshopper

69,-

KJØP
This is a 180ml Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.     FEATURES Easy application.  This light gray primer has excellent coverage and is recommended for  use prior to painting a light color onto a darker colored material.  It can be used on plastic or metal.  Air spray can.  Color coded plastic lid.   INCLUDES One Can of Surface Primer L   REQUIREMENTS Well Ventilated Area   SPECIFICATIONS  Contains: 180ml

139,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Yellow Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.           Keep out of the reach of children.

109,-

KJØP
   This is Screw Bag A for the Tamiya Grasshopper FEATURES: Screws feature steel construction INCLUDES: Eleven 2x8mm phillips head screws, silver in color           Twelve 2x10mm phillips head screws, silver in color           Two 2.5x5mm phillips head screws, black in color           One 3x11mm step pin, silver in color           Nine 3.25x6.75mm flat washers, silver in color           Twenty one 2mm nuts, silver in color           Two 3mm nuts, silver in color REQUIRES: Installation following the model manual COMMENTS: Consult your building manual for screw locations

69,-

79,-

Ikke på lager
-13%
This is a package of sixteen 5x11mm Ball Bearings from Tamiya. FEATURES Replaces plastic bushings in many Tamiya entry level kits  May also be used anywhere a ball bearing this size is needed INCLUDES Sixteen 5x11mm Ball Bearings SPECIFICATIONS  Inner Diameter: 5mm  Outer Diameter: 11mm  Thickness: 4mm

249,-

269,-

KJØP
-7%
HPI 160151 - Plazma 7.2V 3300mAh NiMH Stick Battery Pack Feel the Power of Plazma with the all new battery range from HPI Racing.The Plazma NiMH range is the ideal match for all HPI kits that require a durable and reliable Nickel-Metal Hydride battery cell.This NiMH rounded stick pack is a universal fit in many electric-powered kits and battery-powered accessories like the HPI Roto Start. Perfect for kits like the E10, RS4 Sport 3 & the Maverick Quantum. Specifications: Voltage: 7.2V Capacity: 3300mAh Battery Type: NiMH 6-Cell Stick Pack Cell Size: Sub-C Dimensions: 139 x 48 x 26mm Connector: Tamiya THIS PART FITS THE FOLLOWING KITS / PARTS: Savage X 4.6 Crawler King Ford F-150 SVT Raptor JUMPSHOT MT V2.0 JUMPSHOT SC V2.0 JUMPSHOT ST V2.0 E10 TOURING MICHELE ABBATE E10 DRIFT FAIL CREW NISSAN SKYLINE RS4 Sport 3 Drift Dai Yoshihara RS4 Sport 3 Drift Team Worthouse RS4 SPORT 3 1969 FORD MUSTANG.

279,-

329,-

KJØP
-15%
This is the Cera-Grease HG from Tamiya.     FEATURES High-performance grease which can reduce friction loss by 50%  Consists of extremely fine boron nitride particles  For use on plastic and metal parts   INCLUDES One Tube of Cera-Grease HG   REQUIREMENTS Apply to gears, axles, and joints to increase efficiency   SPECIFICATIONS  NET: 10g (0.35oz)   COMMENTS Do not apply to switches

85,-

KJØP
This is an Angled Tweezers from Tamiya.     FEATURES Handy when handling small parts and adding decals to your models.  The edges of the tweezers are rounded to prevent scratching.  Stainless steel with a Black cationic finish for long life.  Carded packaging.   INCLUDES One Angled Tweezers.   SPECIFICATIONS  Length: 6" (15.2cm)  sdw 10/31/01

129,-

KJØP
This is a set of large and small snap pins(body clips) for any car or truck kit. FEATURES:  They are dark colored so may be easily lost in the dirt or on a            carpet track.  The small ones are straight so they may be sort of            difficult to grip, but the large ones are bent upward and they have            a large loop which makes them easy to grip. INCLUDES:  5- small snap pins(body clips)           10- large snap pins(body clips)

45,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png