Hopp til innhold
Hjem / Bilbaner / Scalextric / Scalextric skinner / Scalextric C8511 Track Extension Pack 2

Scalextric C8511 Track Extension Pack 2

Art.nr: C8511

599,-

Scalextric

Scalextric
Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Å utvide din Scalextric bilbane har aldri vært lettere. De sju utvidelses pakkene til Scalextric er veldig fleksible i sitt design. Alle av disse Extensions pakkene kan legges til enhver som helst bane og utvider banen til en enda heftigere opplevelse.

Alle Track Extensions Packs er fullt kompatible med både standard og digitalt oppsett.

En eller flere Track Extension Packs kan legges til samme bane samtidig. Alle pakkene sammen lager et imponerende antall forskjellige banevarianter. 

Spesifikasjoner:
´One size fits all "-konseptet.
Kompatibel med digitale og standard sett.
Passer alle baner i 1:32 serien.

Inneholder:
1 stk. Hopp med landingsrampe
2 stk. standard rette skinner
2 stk. Lang rette med innsnevring

Rekkverk og barrierer

Produsent

Scalextric

Scalextric

Kunder kjøpte også

Hovedbilde Scalextric C8075 Braid pack (6 stk børster)
Scalextric C8075 Braid pack (6 stk børster)
  Braid pack (6 stk børster)

59,-

KJØP
Hovedbilde Scalextric C7002 Digital Håndkontroll (1 stk) Hovedbilde Scalextric C7002 Digital Håndkontroll (1 stk)
Scalextric C7002 Digital Håndkontroll (1 stk)
Denne håndkontrollen passer til Scalextric Digitale Powerbases. Kan ikke brukes på standard eller andre eldre analoge Powerbases. Håndkontrollen har tre knapper: Gi gass Bremse Bytte kjørefil (må ha Straight Lane Change Track C7036 for å benytte denne funksjonen) Inneholder: 1 stk. Digital Håndkontroll 8 stk. forskjellige farge topper (blå, lilla, rød, oransje, gul, grønn, svart og hvit)

395,-

KJØP
Hovedbilde Scalextric C8516 Digital Easy Fit Plug For Single Seat ... Hovedbilde Scalextric C8516 Digital Easy Fit Plug For Single Seat ...
Scalextric C8516 Digital Easy Fit Plug For Single Seat ...
Scalextric Digital Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking! F1 EasyFit Digital Plug Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to perform. To Convert a DPR car 1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug. 2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug. 3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis. Features The F1 EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds. Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise. Note C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug. Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006. * Four car and six car powerbases available

329,-

KJØP
Hovedbilde Scalextric C8207 HALF STRAIGHT 175MM (2 PER BAG)
Scalextric C8207 HALF STRAIGHT 175MM (2 PER BAG)
CONTENTS 2 x 175mm Half-straight Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with C8223 Half Straight Borders (not included).

179,-

KJØP
Hovedbilde Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger ...
Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger ...
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Scalextric C8556 Track Extension Pack 7
Scalextric C8556 Track Extension Pack 7
Å utvide din Scalextric bilbane har aldri vært lettere. De sju utvidelses pakkene til Scalextric er veldig fleksible i sitt design. Alle av disse Extensions pakkene kan legges til enhver som helst bane og utvider banen til en enda heftigere opplevelse. Alle Track Extensions Packs er fullt kompatible med både standard og digitalt oppsett. En eller flere Track Extension Packs kan legges til samme bane samtidig. Alle pakkene sammen lager et imponerende antall forskjellige banevarianter.  Spesifikasjoner: ´One size fits all "-konseptet. Kompatibel med digitale og standard sett. Passer alle baner i 1:32 serien. Inneholder: 4 stk. 350mm Rett Skinne 4 stk. Radius 3 Sving 22.5°

649,-

699,-

KJØP
-7%
Hovedbilde Traxxas 82224-4 TRX-4 Sport Scale Crawler Truck 1/10 ... Hovedbilde Traxxas 82224-4 TRX-4 Sport Scale Crawler Truck 1/10 ...
Traxxas 82224-4 TRX-4 Sport Scale Crawler Truck 1/10 ...
Traxxas TRX82224-4-BLUE - TRX-4 Sport Clipless - BLUE Purpose Built TRX-4® Sport combines the unbeatable ground clearance and driving dynamics of Traxxas portal axles, sticky Canyon Trail™ tires, and a clipless lightweight pickup truck body for a leaner, performance-focused truck. The Sport’s unique bumpers, wheels, and body were designed for increased climbing versatility. Whether it’s a fun trail run or a hardcore technical crawl, the TRX-4 Sport’s capability and performance-built approach takes your outdoor adventure to a new level. New Clipless Body Mounting New to TRX-4 Sport, clipless body mounting combines clean flowing lines with secure latching convenience. TRX-4 Sport’s hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds to access the chassis. Features: Trail-Tuned XL-5 HV Waterproof Electronic Speed Control Fully waterproof design Traxxas EZ-Set® one-button setup Large, efficient heat sink Wide voltage latitude 6–7 cell NiMH (7.2–8.4V) and 2–3s LiPo (7.4–11.1V) Two stage low voltage protection (LVD) Five drive profiles: Sport Mode — forward / brake / reverse Race Mode — forward / brake / no reverse Training Mode™ — 50% forward / 100% brake / 50% reverse (patented) Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake Motor Powerful Titan™ 21T reverse rotation motor with internal cooling fan Precise preset gear mesh adjustments Motor retention separate from gear mesh Portal Axles Increase ground clearance Eliminate torque twist Steel gears Improve axle geometry and reduce strain on driveshafts Rigid Steel Frame 1.5 mm thick steel frame rails increase torsional rigidity Innovative design allows four wheelbase positions (300mm, 312mm, 324mm, 336mm) Adjustable rear shock tower positions for SWB and LWB configurations Bumpers adjust fore and aft Rugged rock rails adjust for width Wire routing clips integrated into frame rails Drivetrain Full-time shaft driven 4-wheel drive Tough 6 mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Spool-locked front and rear differentials Steel gear transfer case Innovative Battery Compartment Hinged battery strap allows quick and easy battery access No pins to lose Accommodates different height batteries Accepts full-size long battery packs Integrated compartment accepts smaller 1/16 scale batteries (with optional strap) Transmission Single-speed with steel gears Dual horizontal shafts Twin friction plate slipper clutch Easily removed for servicing Steering Chassis mounted 2075X metal gear digital servo Superior 45° steering angle Direct steering (no servo saver) Steering geometry corrected for bump steer Suspension Front — 3 link with panhard Rear — triangulated 4 link Heavy-duty rod ends with steel hollow balls 5mm diameter steel link rods with 4mm threaded ends Aluminum GTS Shocks Oil-filled coilover GTS shocks exclusive to TRX-4 chassis Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals Wheels and Tires Rugged black 5-spoke wheels Pre-mounted 1.9” Canyon Trail tires with trail-tuned foam inserts Trail tuned S1 rubber compound 12mm steel hex   TQ™ 2.4GHz 2-channel transmitter Patented O-Ring Sealed Watertight Receiver Box Keeps the Micro Receiver Dry Sealed Ball Bearings Hex Hardware with Rust-Resistant Black Oxide Coating TRX-4 SPORT DATA: Length: 557 mm Front Track: 249 mm Rear Track: 249 mm Ground Clearance: 80 mm Weight: 2.63 kg Height: 241 mm Wheelbase: 312 mm Approach Angle: 58.82° Departure Angle: 45.83° Breakover Angle: 58.93° Front Shock Length: 90 mm Rear Shock Length: 90 mm Front Wheels: 1.9 x 1.02 inches (49 x 26 mm) Rear Wheels: 1.9 x 1.02 inches (49 x 26 mm) Front Tires: 4.64 x 1.89 inches (118 x 48 mm) Rear Tires: 4.64 x 1.89 inches (118 x 48 mm) Hex Size: 12 mm Speed Control: XL-5 HV Motor (electric): 21T Reverse Rotation Transmission: Single Speed Gear Pitch: 32P Differential Type: Locked Spool Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic “Hill Hold” Drive System: Shaft Driven 4WD Steering: Chassis Mounted Servo Servo: 2075X Metal Gear Transmitter: TQ™ 2.4GHz 2-Channel Transmitter Receiver: 6519 Skill Level: 2 Battery Tray: L158.75 x W47 x H23/26 mm XL-5 HV ESC Specs: Input Voltage: 6–7 Cells NiMH, 2–3s LiPo Case Size: 1.23” W x 2.18” D x 1.04” H Weight: 74 g Motor Limit: 21-turns (550 size) On Resistance Forward: 0.004 Ohms On Resistance Reverse: 0.004 Ohms Peak Current - Forward: 100A Peak Current - Reverse: 100A Braking Current: 60A Continuous Current: 18A BEC Voltage: 6.0 VDC BEC Current: 1A Power Wire: 14 Gauge / 5” Input Harness Wire: 26 Gauge / 14.5” ransistor Type: MOSFET PWM Frequency: 1700Hz Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off) Thermal Protection: Thermal Shutdown Single-button setup: Yes, Traxxas EZ-Set® Profile selection:  Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, no REV Training Mode:* 50% FWD, 100% brakes, 50% REV Trail Mode: 100% FWD, 100% Brake, 100% REV, Trail-Tuned Brake on Neutral Crawl Mode: 100% FWD, 100% Instant REV, 100% Brake on Neutral * Patented Motor Specs: Type: High-torque brushed motor Size: 550 Weight: 390 g Length: 78mm (Overall) - 57 mm (Can) - 38.9 mm diameter Turns: 21T reverse rotation Voltage: 16.8V What’s In The Box: TRX-4, Ready-To-Drive® model XL-5 HV waterproof electronic speed control Titan™ 21T reverse rotation motor TQ™ 2.4GHz radio system High quality maintenance tools What You’ll Need: Batteries: TRX-4 accepts a wide variety of NiMH (4–7 cell) and LiPo (2s–3s) batteries. Charger: Traxxas EZ-Peak Live charger is recommended for easy and fast charging performance (model #2971). AA Alkaline Batteries: Four AA alkaline batteries for the transmitter.

4.495,-

4.995,-

KJØP
-10%
Hovedbilde Scalextric C8210 Straight Crossover 90° (1 stk)
Scalextric C8210 Straight Crossover 90° (1 stk)
Scalextric Straight Crossover 90° (1 stk) C8210. Dette gjør løpet ekstra spennende og morsomt. Klarer du å unngå å bli krasjet i eller om du har lyst til å krasje og dytte ut din konkurrent ut av banen. Fin baneutvidelse som øker spenningen og som tillater nye spennende måter å sette opp din Scalextric 1:32 bilbane.

489,-

549,-

KJØP
-11%
Hovedbilde Scalextric C8212 Barrier and Clips Pack
Scalextric C8212 Barrier and Clips Pack
5 x 330mm Barriers (Length 330mm) 15 x Barrier Clips

169,-

KJØP
Hovedbilde Scalextric C8246 Side Swipe Straights
Scalextric C8246 Side Swipe Straights
Use to create exciting bottleneck section or combine with C8201 Radius 1 Hairpin Curve 90° to create a tight and perilous hairpin. Contents 2 x 350mm Side Swipe Straights Push-fit Scalextric track for quick and easy circuit building . Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight.

323,-

KJØP
Hovedbilde Scalextric C8329 Guide & braidplates
Scalextric C8329 Guide & braidplates
  Round Guide Blade 4 Braid Plates 1 Screw 

79,-

KJØP
Hovedbilde Scalextric C8510 Track Extension Pack 1
Scalextric C8510 Track Extension Pack 1
Track Extension Pack 1 Å utvide din Scalextric bilbane har aldri vært lettere. De sju utvidelses pakkene til Scalextric er veldig fleksible i sitt design. Alle av disse Extensions pakkene kan legges til enhver som helst bane og utvider banen til en enda heftigere opplevelse. Alle Track Extensions Packs er fullt kompatible med både standard og digitalt oppsett. En eller flere Track Extension Packs kan legges til samme bane samtidig. Alle pakkene sammen lager et imponerende antall forskjellige banevarianter.  Spesifikasjoner: ´One size fits all "-konseptet. Kompatibel med digitale og standard sett. Passer alle baner i 1:32 serien. Innholder: 2 x Racing svinger Rekkverk og barrierer

549,-

649,-

KJØP
-15%
Hovedbilde Scalextric C8512 Expansion pack 3 - Hairpin Hovedbilde Scalextric C8512 Expansion pack 3 - Hairpin
Scalextric C8512 Expansion pack 3 - Hairpin
  Pågybbingssett for Scalextric 1:32 bilbaner. Alle Scalextric "Expansion packs" kan brukes sammen med alle Scalextric 1:32 bilbaner. En rask måte å utvide din bilbane!  Inneholder: 2x Hairpin curves (innsnevret sving) 2x Side swipes (innsnevringer) Borders & barriers 

619,-

679,-

KJØP
-9%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png