Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servoer / Savox Servoer / Savöx B-12KG - Budget Analog Servo, Standard Size & Metal Gear
-9%

Savöx B-12KG - Budget Analog Servo, Standard Size & Metal Gear

Art.nr: SAV-B-12KG

299,-

329,-

- 9%
Savox

Savox
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Savöx B-12KG - Budget Analog Servo, Standard Size & Metal Gear

"Budget by Savox" analog servos offer the same level of quality as the digital servo line, but at a much lower price, making them a great value!

Specifications:

  • Torque @ 4.8v: 10kg/cm
  • Speed @ 4.8v: 0.26s/60deg
  • Torque @ 6v: 12kg/cm
  • Speed @ 6v: 0.23s/60deg
  • Dimensions: L40.7 x W20 x H39.9mm
  • Weight: 52g

Produsent

Savox

Savox

Kunder kjøpte også

Hovedbilde Hitec 57345S Servo Extension 12
Hitec 57345S Servo Extension 12"
   This is a 12" Servo Extension by Hitec. FEATURES: This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Plugging into receiver and servo SPECS: Length: 12" (304mm) COMMENTS: Wire color code: Hitec- Black: negative Red: positive Yellow: signal

49,-

59,-

KJØP
-17%
Hovedbilde Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...
Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...
This is the Hitec HS-5565MH High Voltage, High Speed Digital Servo.     FEATURES Ideal for 1/10 scale touring cars, buggies and short course vehicles,  helicopters up to .90 size, and sport to high performance aircraft  up to 25 percent  Heavy duty metal gears and dual ball bearings  Coreless motor   INCLUDES HS-5565MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round  Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single  Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and  Instructions   SPECIFICATIONS  Operating Voltage: 6.0 - 7.4V DC  6.0V 7.4V  Speed: 0.11 sec/60° 0.09 sec/60°  Torque: 153 oz-in (11 kg-cm) 194 oz-in (14 kg-cm)  Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 37.8mm)  Weight: 2.10oz (60g)  Wire Length: 11.8" (30mm)  Wire Gauge: 25AWG  Operating Temperature Range: -4 to 140°F  Idle Current: 4mA  Stall Current: 2100mA @ 6.0V, 2700mA @ 7.2V  Potentionmeter Type: 4 slider 1M cycle   COMMENTS A note on coreless motors-a conventional servo motor has a steel core  armature wrapped with wire that spins inside the magnets. In a  Coreless design, the armature uses a wire mesh that forms a cup  that spins around the outside of the magnet. This arrangement is  much lighter resulting in smoother operation and faster response  time.

995,-

1.095,-

KJØP
-9%
Hovedbilde DynoMAX 9685 Charge Lead Futaba RX with 4mm Banana ...
DynoMAX 9685 Charge Lead Futaba RX with 4mm Banana ...
D-MAX™ Charging Harness for Radio Batteries with Futaba Connector This is a charge lead for charging TX & RX radio batteries with a Futaba connector. Specs: Length: 50cm Wires: 20AWG Charger Connectors: 4mm male bullets Battery Connector: Futaba RX

69,-

KJØP
Hovedbilde Radient 010019 XT30 FEMALE (BATTERY END) INCLUDING ...
Radient 010019 XT30 FEMALE (BATTERY END) INCLUDING ...
XT30 FEMALE (BATTERY END) INCLUDING HEAT SHRINK (5PCS)

69,-

KJØP
Hovedbilde SkyRC 600056 Multi-balanseringsbrett XH/TP/FP/HP/PQ/EH
SkyRC 600056 Multi-balanseringsbrett XH/TP/FP/HP/PQ/EH
SkyRC 600056 Multi-balanseringsbrett som leveres med ledning for tilkobling til 6cell balanseringsutgang på lader. Brettet har utgang for 2-6celler og vil passe til de batterier som brukes til RC og som er utstyrt med balanseringskontakt. Så ønsker du å rydde opp i balanseringsjungelen, og ha kun ett brett tilkoblet laderen der alt passer, så er dette brettet for deg. Cell Count: 2-6s(7.4V-22.2V) Balance Connector Type: HP/PQ, TP/FP, XH, EH

139,-

KJØP
Hovedbilde 6,0V 2000mAh - Bronto RX Pack - Ni-Mh
6,0V 2000mAh - Bronto RX Pack - Ni-Mh
6,0V 2000mAh - Bronto RX Pack - Ni-Mh Lengde 71,5mm Bredde 52mm Høyde 14,5mm Plugg JR servoplugg Ledning 10cm 22AWG Vekt 144gram

185,-

KJØP
Hovedbilde Radient 010020 XT30 MALE INCLUDING HEAT SHRINK (ESC ...
Radient 010020 XT30 MALE INCLUDING HEAT SHRINK (ESC ...
Radient 010020 XT30 MALE INCLUDING HEAT SHRINK (ESC END) (5PCS)

69,-

KJØP
Hovedbilde Bronto Servotester for 1-3 servoer Hovedbilde Bronto Servotester for 1-3 servoer
Bronto Servotester for 1-3 servoer
Liten og praktisk servotester som kan teste opp til tre servoer samtidig. Testeren har tre funksjoner for testing. Manuell hvor du vrir på vribryteren for å teste utslaget, senter funksjon for å teste servosenter, og autofunksjon som setter servoen i kontinuerlig bevegelse mellom ytterpunktene. Testeren behøver en innkommende strømkilde(mottakerbatteri) på mellom 4.8 og 6V. Velg mellom å koble til en til tre servoer for samtidig testing.   Vekt  8g Størrelse  42.5 x 24 x 23.5mm Modus  Manuell, Nøytral og Automatisk Innstrøm  4.5-6V

109,-

KJØP
Hovedbilde SkyRC S100 Neo Computerlader AC100W/DC200W Hovedbilde SkyRC S100 Neo Computerlader AC100W/DC200W
SkyRC S100 Neo Computerlader AC100W/DC200W
SkyRC S100 Neo er ett godt valg for deg som ønsker en kompakt og kraftig lader. S100 Neo har en makseffekt vil gi deg muligheten for 100W lading med AC og 200W DC. Maks ladestyrke er 12A på XT60 porten. Laderen bruker tre knapper til manøvrering i menyene, har innebygget balanserer og XT60-type tilkoblingspunkter. Laderen har også en USB-C PD-port som gir deg muligeten til å lade mobil og andre dingser. Denne laderen er en multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd og Pb batterier. Laderen går på vanlig nettstrøm 220V, eventuelt på 6-30V DC. Det følger med 220V strømkabel, batterier med XT60-kontakt kobles direkte i XT60-utgang på laderen. Skal man lade batterier med annen type batteriplugg må overgang benyttes, dette må kjøpes løst. XH-balanseringsplugg plugges direkte i balanseringsutgangen på lader. Spesifikasjoner: Vekt 340gram Innspenning AC 100-240V Innspenning DC 6-30V Display 128x160p m/farge Størrelse 105xx105x62mm Antall celler LiPo 1-6 Antall celler NiMh/NiCD 1-15 Discharge 20W Maks Ladestyrke 0.1-12,0A Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. Inkludert i eska: S100 Neo laderen, engelsk manual og 220V strømkabel.

699,-

799,-

KJØP
-13%
Hovedbilde DynoMAX B9525 Universal/JR Servo Extension Wire with ...
DynoMAX B9525 Universal/JR Servo Extension Wire with ...
DynoMAX B9525 - Universal/JR Servo Extension Wire with Locks This is an flat 300mm long extension wire with universal/JR connectors that is equipped with connector locks. Specs: Length: 300mm Wires: 22AWG Connectors: Universal/JR with locks

29,-

KJØP
Hovedbilde Traxxas 3960 Spur Gear 0.8P 65T
Traxxas 3960 Spur Gear 0.8P 65T
This is the optional .8 Metric Pitch 65 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 65T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.12" (54mm)           Thickness: .23" (6mm)

39,-

Ikke på lager
Hovedbilde Traxxas 8028 LED Lights Power Supply 3V 0.5A Hovedbilde Traxxas 8028 LED Lights Power Supply 3V 0.5A
Traxxas 8028 LED Lights Power Supply 3V 0.5A
Lighting Module Provides Stable Power Pack After Pack Adding LED lighting components to your TRX-4 is simple with the Traxxas waterproof power supply. This unit provides stable, regulated output with batteries ranging from NiMH to 3S LiPo. The power supply connects to the receiver and electronic speed control to provide single-point control of your lighting components. The lights turn on when the receiver is powered on. The included 3-in-1 wire harness allows the full lighting setup to be connected with a single plug.   Included in: #428030 Complementary to: #428025, #428026 & #428027

249,-

KJØP
Hovedbilde Tamiya 74085 RC Tool Set 8pcs
Tamiya 74085 RC Tool Set 8pcs
This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. About the Item •No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. •1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. •Size 5 minus (-) screwdriver. •Size 5.5 & 7 box driver. •Comes with a convenient driver stand. Tamiya Craft Tools R/C Tool Set 74085

369,-

399,-

KJØP
-8%
Hovedbilde Tamiya 87099 Cera-Grease HG
Tamiya 87099 Cera-Grease HG
This is the Cera-Grease HG from Tamiya.     FEATURES High-performance grease which can reduce friction loss by 50%  Consists of extremely fine boron nitride particles  For use on plastic and metal parts   INCLUDES One Tube of Cera-Grease HG   REQUIREMENTS Apply to gears, axles, and joints to increase efficiency   SPECIFICATIONS  NET: 10g (0.35oz)   COMMENTS Do not apply to switches

85,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png