SAMIRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Sanwa Aquila 6-ch Computer Radio w/RX71E

Art.nr: 101A30772A
1.690,- 1.990,- -15%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

Ikke på lager

6-Channel 2.4GHz FHSS-1 Aircraft Radio System


Fly the Aquila-6 2.4G FHSS-1 Digital Proportional radio control system and you'll have a transmitter ready for just about every 6-channel aircraft and helicopter available today. From micro electric aircraft to scale aerobatic aircraft and from mini fixed-pitched helicopters to advanced CCPM 3D electric helicopters, the Aquila-6 can handle it - and do it glitch-free!

The Sanwa Aquila-6 is the perfect all round flight transmitter. It is easy to use and therefore ideally suited for beginners and advanced pilots. The new Sanwa flight transmitter offers multiple functions for airplanes as well as for helicopters. It features 6 channels and can be used for a wide range of models, from trainer to scale models. 10 model memories can be activated quickly and uncomplicatedly.
  
In addition the Sanwa Aquila-6 convinces with Direct Model Select, different flight modes in airplane and helicopter programs, general trim, trim for each flight mode, adjustable mixes for independent flight modes, and advanced swash plate programming. 

The Sanwa Aquila-6 will enthuse you!

General System Features:

• 6-Channel 2.4G FHSS-1 Digital Proportional Computer Radio Control System for Aircraft and Helicopters
• Includes Full-Range RX71E 7-Channel 2.4G FHSS-1 Receiver
• Uses 6 "AA" Batteries for Lighter Weight and Better Feel
• 10-Model Memory
• Direct Model Select (Models 1-3)
• Easy-to-Read Multi-Function LCD with Digital Voltage Display
• User-Selectable Model Type Templates
• Digital Trims
• Trainer System Compatible with all SD Series Transmitters• Model Naming
• Model Select
• Audible Low-Voltage Alarm
• Low-Power Range-Check Mode
• Programmable Fail Safe
• User-Selectable Flight Modes
• Stop Watch and Count-Up Timers
• Data Copy and Data Reset


Aircraft-Specific Programming Features:

• Servo Monitor
• 3 Flight Modes (FN/F1/F2)
• Aileron, Elevator, and Rudder Dual Rate
• Aileron, Elevator, and Rudder Exponential
• Servo Reversing
• Servo Centering Sub-Trim
• End-Point Adjustment
• Throttle Cut
• 5-Point Programmable Throttle Curve
• Aileron Differential
• Flaperon Mixing
• Flap-to-Elevator Mixing
• Dual Elevator Mixing with End-Point Adjustment
• Ailvator Mixing
• V-Tail Mixing with End-Point Adjustment
• Delta (Elevon) Mixing with End-Point Adjustment
• 2 Programmable Compensation Mixers
• Common or Flight Mode-Specific Trim with Throttle-Trim Lock

Helicopter-Specific Programming Features:

• Servo Monitor
• 3 Flight Modes (FN/F1/F2)
• 9 Pre-programmed Swashplate Templates
• Aileron, Elevator, and Rudder Dual Rate
• Aileron, Elevator, and Rudder Exponential
• Servo Reversing
• Servo Centering Sub-Trim
• Advanced Swashplate Adjustment
• CCPM End-Point Adjustment
• End-Point Adjustment
• Throttle Cut
• 5-Point Programmable Throttle Curve
• Throttle Hold
• 5-Point Programmable Pitch Curve
• Revolution Mixing
• 2 Remote Gyro Gains
• 2 Programmable Compensation Mixers
• Common or Flight Mode-Specific Trim with Throttle-Trim Lock

 

Items Required, But Not Included:

• Transmitter Battery - 6-Cell 2200mAh NiMH (#475024) or 2S 7.4V 1300mAh 30C LiPo Battery (#118378).

• Transmitter Battery Charger - AC Dual Charger for NiMH (#475034). If using a LiPo battery, any LiPo balancing charger should work fine. For safety, we recommend removing the LiPo battery from the transmitter during the charging process.

• Receiver Battery - 4-Cell or 5-Cell NiCd or NiMH battery pack or a 2S LiFe/A123 Battery Pack. DO NOT USE A 2S or 3S LiPo without a regulator!

• Servos - Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model. However, most modern servos will work perfectly with the Aquila 6.

Kunder kjøpte også

Trykk Enter for å søke eller Esc for å lukke