SamiRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

RPM 80709 Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rust

Art.nr: 80709
159,-

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

RPM
På lager: 2

RPM Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rustler 4×4 & Hoss 4×4 - Red Replaces stock Traxxas #3655R & #3655X


Quick Notes:

  • Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
  • Does not fit the Rally ST (please see RPM #73362)
  • Each a-arm is 6.5 grams lighter than stock*!
  • 2 packages is needed to complete one full vehicle (front & rear)
  • Replaces stock Traxxas #3655R & #3655X


RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done:

We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!

We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.

RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!

Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.

 

Relaterte produkter

Kunder kjøpte også

Trykk ENTER for å søke