Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Pinion(drev til motor) / 48-pitch 5mm / Robinson Racing 2017 Pinion Gear Hardened 5mm 48P 17T

Robinson Racing 2017 Pinion Gear Hardened 5mm 48P 17T

Art.nr: 2017

189,-

Robinson Racing

Robinson Racing
Kontakt oss for mer informasjon om dette produktet

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Robinson Racing Hardened 17 Tooth 48 Pitch Pinion Gear.

FEATURES:

Constructed of hardened machined steel
May be used on motors with a 5mm shaft including Traxxas, Associated and HPI models

INCLUDES:

17 Tooth 48 Pitch Pinion Gear with 4mm Set Screw

REQUIRES:

2mm hex wrench

SPECS:   

Number of Teeth: 17
Pitch: 48
Hole Diameter: 5mm
Outer Diameter: 0.39" (10mm)

 

 

 

(11)

Produsent

Robinson Racing

Robinson Racing

Kunder kjøpte også

Hovedbilde Robinson Racing 2018 Pinion Gear Hardened 5mm 48P 18T
Robinson Racing 2018 Pinion Gear Hardened 5mm 48P 18T
This is the Robinson Racing Hardened 18 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steel May be used on motors with a 5mm shaft including Traxxas, Associated and HPI models INCLUDES: 18 Tooth 48 Pitch Pinion Gear with 4mm Set Screw REQUIRES: 2mm hex wrench SPECS:    Number of Teeth: 18 Pitch: 48 Hole Diameter: 5mm

189,-

KJØP
Hovedbilde Yeah Racing DDL-100BK 100mm Desert Lizard Two Stage ... Hovedbilde Yeah Racing DDL-100BK 100mm Desert Lizard Two Stage ...
Yeah Racing DDL-100BK 100mm Desert Lizard Two Stage ...
Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper Pair Black For Crawler #DDL-100BK Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!   Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum   Include: Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack)

339,-

399,-

KJØP
-15%
Hovedbilde Robinson Racing 2019 48P Machined Pinion Gear (5mm ... Hovedbilde Robinson Racing 2019 48P Machined Pinion Gear (5mm ...
Robinson Racing 2019 48P Machined Pinion Gear (5mm ...
Robinson Racing 48P Machined Pinion Gear (5mm Bore) (19T) Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

189,-

KJØP
Hovedbilde Robinson Racing 2020 48P Machined Pinion Gear (5mm ... Hovedbilde Robinson Racing 2020 48P Machined Pinion Gear (5mm ...
Robinson Racing 2020 48P Machined Pinion Gear (5mm ...
Robinson Racing 48P Machined Pinion Gear (5mm Bore) (20T) Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

189,-

KJØP
Hovedbilde Robinson Racing 2022 48P Machined Pinion Gear (5mm ... Hovedbilde Robinson Racing 2022 48P Machined Pinion Gear (5mm ...
Robinson Racing 2022 48P Machined Pinion Gear (5mm ...
Robinson Racing 48P Machined Pinion Gear (5mm Bore) (22T) Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

189,-

KJØP
Hovedbilde Robinson Racing 2024 48P Machined Pinion Gear (5mm ... Hovedbilde Robinson Racing 2024 48P Machined Pinion Gear (5mm ...
Robinson Racing 2024 48P Machined Pinion Gear (5mm ...
Robinson Racing 48P Machined Pinion Gear (5mm Bore) (24T) Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

189,-

KJØP
Hovedbilde Axial 30163 Pin 2.0x10 (6)
Axial 30163 Pin 2.0x10 (6)
These are the 2.0x10mm Pins  for the Axial Scorpion Rock Crawler. FEATURES Metal construction, silver in color  INCLUDES Six 2.0x10mm pins REQUIREMENTS Installation on the Rock Crawler  SPECIFICATIONS  Length: .39" (10mm)  Diameter: 2mm

59,-

KJØP
Hovedbilde Kyosho E025 E-Clips (E2.5/10pcs)
Kyosho E025 E-Clips (E2.5/10pcs)
E-Clips (E2.5/10pcs)

35,-

KJØP
Hovedbilde Traxxas 3952X Pinion Gear 32P 22T
Traxxas 3952X Pinion Gear 32P 22T
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

79,-

89,-

KJØP
-11%
Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These  are the pillars of the Mamba X design and the driving forces behind the feature-packed controller.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 6S Sensored Capable: Yes The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle’s new and improved throttle response keeps you ahead of the competition. The Mamba X is proudly designed and manufactured in Olathe, Kansas and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Features: Wide 2S to 6S input voltage range Sensored Motor Support Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-connectors. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1512-2650Kv (P/N: 060-0061-00) motor, with appropriate gearing only.  

2.595,-

2.895,-

KJØP
-10%
Hovedbilde Tamiya 74005 Curved Scissors 5-1/2
Tamiya 74005 Curved Scissors 5-1/2"
This is the Tamiya Curved Tip, Lexan Plastic Body Scissors. FEATURES: Curved tip specially designed to cut polycarbonate bodies used             on radio controlled vehicles.  These can also be used for airplane             canopies, helicopter windshields and other plastics.           Black plastic handle for comfort and control.           Stainless steel cutting blades. INCLUDES: One pair of Body Scissors SPECS:    Blade Cutting Area: 1" (25mm) approximately           Overall Length: 5-1/2" (140mm) approximately

199,-

Ikke på lager
Hovedbilde Tamiya 86003 PS-3 Polycarbonate Spray Light Blue 3 oz
Tamiya 86003 PS-3 Polycarbonate Spray Light Blue 3 oz
   This is Tamiya Color Spray Lacquer for Polycarbonate (PS-3 Light Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Tamiya 51358 Mercedes-Benz Unimog 406 U900 Body Parts ... Hovedbilde Tamiya 51358 Mercedes-Benz Unimog 406 U900 Body Parts ...
Tamiya 51358 Mercedes-Benz Unimog 406 U900 Body Parts ...
This is the Tamiya 1/10 R/C M-B Mercedes Unimog body set for R/C Cars. This is the clear plastic piece that covers the vehicle's chassis and provides the "shape" of the vehicle. FEATURES Compatible with all CR-01 chassis Highly detailed body and cutting lines Body has a plastic protective film on the outside that should be removed after painting INCLUDES One Tamiya 1/10 Scale Mercedes M-B UNIMOG body and bub body One peel-off decal sheets with lights, all body trim and sponsor decals One window masking sheet Black parts tree for the mirrors Metal plated parts tree with front grille and light cases All mounting hardware and body hold down pins Instructions REQUIREMENTS Polycarbonate paint for painting the inside of the body. The color choice is up to the modler Body scissors to cut out the body. Hobby knife or scissors to cut out the decals SPECIFICATIONS Body- Length: 15-1/4" (427mm) Width: 7" (190mm) at center Height: 6-1/4" (95mm) top of cab Height: 3-1/4" ( mm) top of bed Sub Body- Length: 9-1/4" (184mm) Width: 5-1/8" (22mm) Height: 1" (22mm) at highest point

499,-

549,-

KJØP
-9%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png