Handlekurven er tom

Subtotal: 0,-

RC4WD JD00052 1/14 Scale R350 Compact Track Loader RTR JD00052
27.995,- 29.995,- -7%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Ikke på lager

Dette er en bestillingsvare som må betales på forskudd. Leveringstid ca 4-10 uker. Ta kontakt.

1/14 Scale R350 Compact Track Loader RTR

Important Note:Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $170 to ship anywhere in the US and all international countries due to the size and weight.


  • CNC Machined Metal Parts
  • Molded Steel Bucket
  • 6 Channel 2.4Ghz Radio
  • Optimized Steel Hydraulic System
  • Scale Operator Station (can fit a driving figure)
  • Crawler Travel System
  • Heavy Duty Hoses
  • Powder-coated in White, Grey and Red
  • Brushless System (Hydraulic)
  • Scale Interior
  • Transmission Ratio: 1:109
  • Battery Size:90 x 45 x 20mm / 3.54 x 1.77 x 0.78in
  • Bucket Capacity: 155 x 65 x 42mm / 6.10 x 2.55 x1.65in
  • Maximum Bucket Force: 1.5kg / 6.83lbs
  • Scale: 1 : 14
  • Length: 284mm / 11.1in
  • Width: 156mm / 6.14in
  • Height: 157mm / 6.18in
  • Maximum Bucket Height: 235mm / 9.25in
  • Maximum Bucket up and down Angle: 11 to 103 degrees
  • Weight: 3.1kg / 6.8lbs
  • Operating Oil Pressure: 3Mpa
  • Manufactured by JDCustoms
  • 30 Days Limited Warranty



What's Include:

  • 1x 1/14 Scale R350 Compact Track Loader RTR


Required Parts:

  • 2S Lipo Battery
  • 4x AA Batteries for Radio (Z-S1718)
  • Gens ace 5000mAh 7.4V 50C 2S1P Short-Size Lipo Battery Pack with T Style Plug




Optional Parts:

  • 1/14 Grapple for R350 Compact Track Loader (VVV-S0242)
  • 1/14 Pallet Forks for R350 Compact Track Loader (VVV-S0247)



  • While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
  • ESC Supports bullet Connector
  • Use good quality hex drivers to avoid stripping screw heads.
  • Use thread lock when putting metal screws into metal parts.
  • Steps marked with an asterisk (*) require thread lock.
  • Use thread lock sparingly.
  • Do not over tighten screws otherwise you may strip the thread.



Relaterte produkter

Trykk Enter for å søke eller Esc for å lukke