Handlekurven er tom

Subtotal: 0,-

Novak 3243 Eiger Pro ESC/Rock Star Motor & BEC Combo 35T 3243
1.690,- 1.790,- -6%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

På lager: 2

 This is the Novak Eiger Pro 2S/3S Brushed Electronic Speed Control
and 35T Rockstar Brushed Motor for Crawler Applications.

          #5463 3A BEC module allows 3S LiPo battery usage
          Compatible with all Novak brushed motors including the Terra Claw and
            Rock Star motors
          Compatible with 2-3S LiPo cells and 4-9 cell NiMH batteries
          Three throttle modes;
            Rock Crawl Mode with adjustable drag brake power
            Standard/Basher Mode for normal FWD/BRK/REV
            Robotic or Servo Mode for FWD/REV operation only
          Four adjustable parameters;
            Brake Power/Throttle Mode (5 settings)
            Dead Band (5 settings)
            Drive Frequency (5 settings)
            Voltage Cut-Off
          Non-crawling basher mode can be used in any 1/10, 1/12, 1/16, or
            1/18 scale application with a 20 turn or higher brushed motor
          One-Touch programming interface with four multi-colored status LEDs
          6V output for cooling fan or other options such as running lights
          Temperature monitoring allows user to check ESC operating temperature
            at any time
          Thermal overload protection to prevent overheating
          Water-resistant case with silicone gasket seal
          One touch setup
          RoHS compliant
          High number of turns for excellent torque and long run times
          Rebuildable with easily accessible commutator and replaceable brushes
            and springs
          Stand-up brush design
          High-strength ferrite magnet
          Dual ball bearings
          Direct solder wiring tabs for flexible soldering options
          120 day limited warranty through Novak on both components beginning
            at date of purchase

INCLUDES: Novak Eiger Pro Brushed ESC with Gold Plated Bullet Motor Plugs,
            Mounting Tape, Power Cap, Wires, Heat Sink, 3A BEC Module,
            Instruction Manual, 35T Rockstar Brushed Motor

REQUIRES: Installing in vehicle and connecting to battery, receiver and motor

SPECS:      ESC-
          Motor Compatibility: 380, 540 size brushed
          Input Cells: 2-3S LiPo or 4-9 NiMH
          Size: 1.15 x 0.95 x 0.66" (29.0 x 24.3 x 16.8mm)
          Weight: 0.64oz. (18.1g) without wires
          On-Resistance: 0.00036 ohms
          540 Motor Limit: 20T or higher (2S or 3S brushless motor)
          380 Motor Limit: Any 380-size brushed motor
          BEC: 6V DC/3A
          Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
          Input Voltage: 2S LiPo cells or 4-7 cells (1.2V/cell)
          Motor Size: 2.07 x 1.42" (52.7 x 36.1mm)
          Shaft Diameter: 0.125" (3.2mm) accepts all 1/8" pinion gears
          Bearing: Standard 3/8" x 1/8"
          Motor Weight: 5.97oz. (169g)

Kunder kjøpte også

Trykk Enter for å søke eller Esc for å lukke