Hopp til innhold
Hjem / Helikopter / Nine Eagle / NE Helikopter / Nine Eagles transmitter J6 Pro
-7%

Nine Eagles transmitter J6 Pro

Art.nr: NET0008T

1.399,-

1.499,-

- 7%

Nine Eagle
På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Nine Eagles J6 PRO 6CH 2.4gHz radio. This is a high quality radio that allows for binding with many Nine Eagles models such as the Solo Pro 100 and 180 helicopters. The J6 Pro offers many great features for both airplanes and helicopters such as:

Airplane and Glider:
Channel reverse function
Dual rate set
General wing-mix 
Throttle curve setup
Exponential setup
Gear speed
Memory trim
Helicopter:
Channel reverse function
Dual rate set
CCPM mix setup
General wing-mix
Throttle curve setup
Pitch curve setup
Exponential
Gyro sensitivity setup
Thottle hold function
Memory trim
Swashplate type (90° and 120° CCPM)
The J6 PRO is compatible with the following Nine Eagles models:
Solo Pro 328
Solo Pro 228
Solo Pro 100
Solo Pro 180
Sky Eagle
Xtra 300
Sky Runner
Sky Climber
YAK 54
P47
Mustang 3CH
Spitfire 3CH
Sky Surfer
Spitfire 4CH
Mustang 4CH
Sky 500
This radio also supports both mode 1 and mode 2 operation (user selectable by switch on back of radio)
Specs:
Channels: 6
Model type: Airplane and glider/Helicopter
Dual rates: Yes
Expo: Yes
CCPM mixing: Yes
Channel reversing: Yes
Flight mode: Mode 1 or Mode 2 (user selectable by switch on back of radio)

Produsent

Nine Eagle

Relaterte produkter

 

Hovedbilde Nine Eagles Solo Pro 290 (General Link) Hovedbilde Nine Eagles Solo Pro 290 (General Link)
Nine Eagles Solo Pro 290 (General Link)
Art.nr: NE290GL
Copied
Nine Eagles Solo Pro 290 (General Link)   Product Description This is the Brushless Powered, TR (Transmitter Ready) Solo Pro Lama 290 Helicopter in Black and Green from Nine Eagles. This is the TR (Transmitter Ready) version that includes servos, an ESC and receiver. May be flown with any compatible transmitter with the SLT (Secure Link Technology) system such as the Tactic TTX650, TACJ2650. FEATURES Collective pitch 3-rotor blade system Brushless motor 4-in-1 control unit with 3-axis gyro, 20A ESC, mixer and receiver Shaft driven tail rotor 3-S 11.1V 1100mAh 25C LiPo battery 8g and 9g tail lock servos INCLUDES TR Solo Pro Lama 290 Helicopter with Lipo Battery, Receiver, Servos Gyro, Motor, and Instruction Manual REQUIREMENTS 6-ch SLT transmitter SPECIFICATIONS Main Rotor Diameter: 17.7" (450mm) Tail Rotor Diameter: 4.7" (120mm) Length: 18" in (456mm) Width: 3.7 in (95mm) Height: 6.4 in (163mm) RTF Weight: 16.5 oz (470g)

3.695,-

3.995,-

KJØP
-8%

Kunder kjøpte også

Hovedbilde Revell 39604 Contacta Pro Modelling Glue 25gm
Revell 39604 Contacta Pro Modelling Glue 25gm
Revell flytende lim 25gr    Lim beregnet for plastbyggesett. Brukes til alle typer av polystyrene plast..Påfør et tynt lag på begge flater og press sammen. Limet fungerer ved å løse opp og smelte sammende to flatene. Påfør ikke for mye lim. Tørker på noen minutter  Plastflaske med tynn spiss for påføring.    NB! Krever god ventilasjon nå man bruker dette limet. Revell Contacta Professional' is for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine glueing of tiny details and clear part edges.

59,-

69,-

KJØP
-14%
Hovedbilde Ugears 70012 Steam Locomotiv U-460 with Tender Hovedbilde Ugears 70012 Steam Locomotiv U-460 with Tender
Ugears 70012 Steam Locomotiv U-460 with Tender
UGEARS UG70012 - Mechanical Steam Locomotive with Tender Self-assembly: No Glue is Required! Considering safe-cracking as a profession? This might be just where you should start. Build your own safe with a personal lock combination, store your most precious items in the safe (jewelry or candy, your choice), and then promptly forget your combination! Follow the handy steps in the instructions to master the mix of slow knob twists and careful listening to tumbler movements that will open the lock. Will you retrieve your items, or will you have to hire a locksmith? Try it and see. The UGEARS 460 Locomotive with Tender combines all of the technical and artistic innovations that builders have come to appreciate in our other models and takes them a step beyond. Richly detailed with an eye toward realism and romance, our version of this indelible symbol of 19th century technology and adventure captures the imagination of all who see it. It’s no wonder it was such a hit during our Kickstarter campaign. Our locomotive is driven by rubber bands and a gear array instead of superheated steam, but otherwise its main mechanism looks and operates very much like that of a real steam engine. Up close you can see working asynchronous pistons and valves that transfer power to the locomotive’s drive wheels through a moving system of rods, linkages and cranks. Small touches like a fully detailed engineer’s cab with retractable step ladder, art-deco boiler trim, and open-up Tender with coal doors complete this beautiful reminder of a bygone era. The UGEARS 460 Locomotive with Tender is our largest, most complex model to date; yet thanks to our patented plywood joint design and rigorous engineering and quality control process, a hobbyist can complete this model in a single sitting. Like all other UGEARS models, the Locomotive with Tender comes with step-by-step, full-color, truly easy to follow instructions. Specs: Part Number: UG70012 EAN: 4820184120235 Number of components: 443 Estimated time of assembly: 10-12 hours Level: Advance Recommended Building Age: 14+ Model for self-assembly without glue Locomotive Size: 31.5 x 10 x 12.5 cm Tender Size: 16 x 9 x 11.5 cm Package Size: 37 x 17 x 4 cm

895,-

995,-

KJØP
-10%
Hovedbilde Ugears 70032 Rail Mounted Manipulator Hovedbilde Ugears 70032 Rail Mounted Manipulator
Ugears 70032 Rail Mounted Manipulator
UGEARS UG70032 - Mechanical Rail Mounted Manipulator A Fascinating Mechanical Wooden Model! Developing its new fascinating series, Mechanical Town, Ugears presents another addition to the collection: the Rail Manipulator. Set up in the dock of Mechanical Town not far from the Robot Factory, the Manipulator is a purely utilitarian model, which by no means makes it less entertaining than the other models in the range. Like the rest of the Ugears models, the Manipulator is designed to make sure the fun goes on after the assembly is completed. With a number of extras that come in the box, the model guarantees hours of an exciting new pastime. Speaking of extras, with the Manipulator itself, you also receive two sections of rails, the shed under construction, two shipping crates with doors, crane, freight carriage, and five characters. Design & engineering The Manipulator is a mechanical claw with three levers that sits on a platform on the rails. The rails can be connected in parallel or in one line. The settings are completed with a pseudo-metal shed under construction made of giant trusses which arrived straight out of the Industrial age with one of the characters, a roofer with a hammer, sitting on a beam of the shed. The Worker holding signal flags assists the Manipulator operator to control the process, while the Worker with a shovel and the Worker with a wrench are minding their own business in the docks. The model also includes one of the docks’ most important pieces of equipment, the Crane. It can be disassembled and put back together almost by a wave of the hand. With the supplementary mechanisms the rotation and angle of the crane can be locked even with a load. And an important addition to the setting is the Freight carriage with drop sides. Load and unload your freight crates along with the disassembled crane easily and move them to a new destination. All the parts of the set are made of a high-quality plywood and needs no extra materials or tools to assemble. How does it work? The claw itself sits on a platform that can rotate manually or by a valve. The operator's cab, equipped with a protection lid and adjustable headlight, is found in the front part of the model. The counter-clockwise rotation of the cabin switches the Manipulator’s modes: initial position (driving mode) – the claw’s rotation platform locked, the model moves along the track; 90 degree turn (free mode) – the rotation platform is unlocked; 180 degree turn (loading mode) – the wheels of the models are locked along with the gear in the front axle that connects to the ledge on the rails. The rear of the model carries the lever that controls lifting, lowering, and holding of four foot supports providing extra-steadiness while operating the claw. With its articulated claw, the Ugears Manipulator can load and move the freight crates in the Carriage with an extraordinary – up to 1 cm – preciseness. Based on the original prototypes, the Manipulator will teach you about the operational and constructional peculiarities of the real-life machines, such as cranes, excavators, robotic arms, etc; their mechanics and functionality. All in all, the Manipulator has a great capacity both as an assembly model that is exciting to put together and as a great play time companion due to its diverse functionality. Not to forget about its educational value provided by the great mechanics based on the real-life designs. And if you feel like you need to get even more fun from the model, you can always hook your Manipulator up with the other Ugears models from your collection with the coupling hitch holes. Assemble without glue like all UGEARS models. Specs: Part Number: UG70032 EAN: 4820184120600 Number of components: 354 Estimated time of assembly: 5-6 hours Level: Medium Recommended Building Age: 14+ Model for self-assembly without glue Model Size: 40 x 50 x 21 сm Package Size: 37 x 14 x 3 cm  

549,-

599,-

KJØP
-8%
Hovedbilde Ugears 70093 Steampunk Clock Hovedbilde Ugears 70093 Steampunk Clock
Ugears 70093 Steampunk Clock
UGEARS UG70093 - Steampunk Clock A Cool Moveable Wood Kit of a Clock! The very essence of Steampunk, the 3D puzzle “Steampunk Clock” from Ugears is here to remind you of the true spirit of this unique style combining art, science, and amazing mechanics. This model is a miniature imitation of a clock with a delicate carved body and a clever mechanism that sets its gears in motion and gets the hands of the clock moving. Beautiful lace-like ornaments of the Steampunk Clock include floral designs, the Sun, stars, and the Moon. Beautiful gearing of the model includes an original 90-degree angle coupling you can observe when the mechanism is working. Along with a smart gears connection, Ugears engineers implemented another interesting feature: the unsynchronized clock hands sitting on the same axle. Each of them moves with its own pace. The Steampunk Clock is easy to assemble which makes it a perfect model to start with if you are new to the fascinating world of Ugears. Still, in case you have been with us for some time, you will definitely want this outstanding puzzle for your collection. The model is made of natural eco-friendly materials and has a pleasant wooden scent. All you need to assemble your Steampunk Clock comes in the box, no glue or additional tools are required. If you want to spark somebody’s curiosity and introduce them to the fascinating world of mechanics, there is no better way to do it than to invite them to assemble the mesmerizing Steampunk Clock from Ugears. Specs: Part Number: UG70093 EAN: 4820184121027 Number of components: 43 Estimated time of assembly: 1 hour Level: Easy Recommended Building Age: 14+ Model for self-assembly without glue Model Size: 5.3 x 7.8 x 12.5 cm Package Size: 9 x 27.5 x 0.9 cm

139,-

KJØP
Hovedbilde Nine Eagles Solo Pro 290 (General Link) Hovedbilde Nine Eagles Solo Pro 290 (General Link)
Nine Eagles Solo Pro 290 (General Link)
Nine Eagles Solo Pro 290 (General Link)   Product Description This is the Brushless Powered, TR (Transmitter Ready) Solo Pro Lama 290 Helicopter in Black and Green from Nine Eagles. This is the TR (Transmitter Ready) version that includes servos, an ESC and receiver. May be flown with any compatible transmitter with the SLT (Secure Link Technology) system such as the Tactic TTX650, TACJ2650. FEATURES Collective pitch 3-rotor blade system Brushless motor 4-in-1 control unit with 3-axis gyro, 20A ESC, mixer and receiver Shaft driven tail rotor 3-S 11.1V 1100mAh 25C LiPo battery 8g and 9g tail lock servos INCLUDES TR Solo Pro Lama 290 Helicopter with Lipo Battery, Receiver, Servos Gyro, Motor, and Instruction Manual REQUIREMENTS 6-ch SLT transmitter SPECIFICATIONS Main Rotor Diameter: 17.7" (450mm) Tail Rotor Diameter: 4.7" (120mm) Length: 18" in (456mm) Width: 3.7 in (95mm) Height: 6.4 in (163mm) RTF Weight: 16.5 oz (470g)

3.695,-

3.995,-

KJØP
-8%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png