Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / HPI El-Biler / HPI Racing Savage Flux XS / HPI 101230 Racing Differential Shaft 5x23.5mm (2)

HPI 101230 Racing Differential Shaft 5x23.5mm (2)

Art.nr: 101230

109,-

Hpi Racing

Hpi Racing
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the 5x23.5mm Diff Shafts for the HPI Savage XS Flux and Bullet Vehicles.

FEATURES:

Hardened steel construction

INCLUDES:

Two 5x23.5mm Diff Shafts

 

 

 

(11)

Produsent

Hpi Racing

Hpi Racing

Kunder kjøpte også

Hovedbilde HPI Racing 105312 SHOCK TOWER/BODY MOUNT/ROLL BAR SET Hovedbilde HPI Racing 105312 SHOCK TOWER/BODY MOUNT/ROLL BAR SET
HPI Racing 105312 SHOCK TOWER/BODY MOUNT/ROLL BAR SET
SAVAGE XS Genuine HPI quality spare part for easy maintenance and repairs. 

219,-

229,-

KJØP
-4%
Hovedbilde HPI 66655 - DRIVE SHAFT 6x65mm (2pcs)
HPI 66655 - DRIVE SHAFT 6x65mm (2pcs)
HPI  66655 - DRIVE SHAFT 6x65mm (2pcs) THIS PART FITS THE FOLLOWING KITS / PARTS: Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT SAVAGE XS FLUX VGJR Savage XS Flux Chevrolet El Camino

139,-

KJØP
Hovedbilde HPI 105815 Racing Drive Shaft 6x52mm Savage XS
HPI 105815 Racing Drive Shaft 6x52mm Savage XS
This is the 6x52mm Drive Shaft for the HPI Savage XS Flux Mini Monster Truck. FEATURES: Steel construction INCLUDES: 6x52mm Drive Shaft         (11)

79,-

KJØP
Hovedbilde Traxxas 3775 Oilite Bushings (12)
Traxxas 3775 Oilite Bushings (12)
 This is a package of bronze oilite bushings for the Traxxas Stampede and Rustler trucks.  These trucks use eight of these bushings, so there will be four left over (spares). PACKAGE INCLUDES:  Twelve 5x8mm bushings.

65,-

KJØP
Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ... Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 4100KV Motor Combo - 2-3S LiPo   ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor   EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.   Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

KJØP
-11%
Hovedbilde DynoMAX B9870 - Connector Adapter EC5 (male) - XT60 ...
DynoMAX B9870 - Connector Adapter EC5 (male) - XT60 ...
DynoMAX B9870 - Connector Adapter EC5 (male) - XT60 (female) This is an practical connector adapter for batteries with an EC5 connector where you want to change it to an XT60 connector without soldering etc. It also works if you have an charge lead with an XT60 connector but you have an vehicle with a EC5 connector system.

39,-

KJØP
Hovedbilde Traxxas 3934 Body Clips (12)
Traxxas 3934 Body Clips (12)
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

KJØP
Hovedbilde Hpi Racing 107870 WR8 Rally Off Road Tire (2pcs)
Hpi Racing 107870 WR8 Rally Off Road Tire (2pcs)
WR8/Use with 1.9"(48mm) wheels Modelled on the actual tires used in the WRC and at off-road rally events around the world, these tires are designed to get past the loose soil on top and dig into the firmer dirt underneath, giving you fantastic traction in just about every off-road situation. With a softer compound than the standard tire, plus excellent corner capabilities and fantastic self-cleaning properties for perfect mud-shedding performance, you'll get supreme cornering power as well as powerful acceleration and braking! Fit this tire onto any of our WR8 rally off-road wheels for the ultimate in realistic scale looks! #107881 WR8 RALLY OFF-ROAD WHEEL 48x33mm (WHITE / 2pcs) #107970 WR8 RALLY OFF-ROAD WHEEL BLACK (48x33mm/2pcs) NOTE: These are 1.9” tires and must be fitted on WR8 Off-Road Wheels.

289,-

KJØP
Hovedbilde HPI 101229 Gear Shaft 5x29mm for Savage XS/Bullet (2)
HPI 101229 Gear Shaft 5x29mm for Savage XS/Bullet (2)
Gear Shaft 5x29mm for Savage XS/Bullet (2)

129,-

KJØP
Hovedbilde Hpi Racing 107970 WR8 Rally Off-Road Wheel Black ...
Hpi Racing 107970 WR8 Rally Off-Road Wheel Black ...
WR8/Use with 1.9"(48mm) tires Customise the look of your WR8 with the WR8 Rally Off-Road wheel! Styled to look just like the wheels used at WRC events and in rallies around the world, you can choose from a range of colours to get the perfect look for your ride. #107970 WR8 RALLY OFF-ROAD WHEEL BLACK (48x33mm/2pcs) #107971 WR8 RALLY OFF-ROAD WHEEL BRONZE (48x33mm/2pcs) Note: the above wheels fit the off-road WR8 tyres, such as 107870)

119,-

KJØP
Hovedbilde HPI 101305 Racing Wheel Spacer Set (4)
HPI 101305 Racing Wheel Spacer Set (4)
This is the Wheel Spacer Set (4pcs) For the HPI Racing WRI and Bullet Series FEATURES: Metal construction INCLUDES: Four wheel spacers Four bushings COMMENTS: This wheel spacer set can be installed on 1/8 WR8 3.0 Ford Fiesta Rally Abu Dhabi RTR 1/10 Bullet MT 3.0 Nitro 2.4GHz RTR 1/10 Bullet ST 3.0 Nitro 2.4GHz RTR       (11)

69,-

KJØP
Hovedbilde HPI 105805 Racing Slipper Clutch Plate/Pad Set Savage ...
HPI 105805 Racing Slipper Clutch Plate/Pad Set Savage ...
This is the Slipper Clutch Plate and Pad Set for Savage XS Flux Vehicle. FEATURES Steel plates Composite fiber pads INCLUDES Two each Slipper Clutch Plates and Pads

89,-

KJØP
Hovedbilde HPI Racing 106439 Cup Joint 5x10x19mm
HPI Racing 106439 Cup Joint 5x10x19mm
This is the 5x10x19mm Cup Joint for the HPI Savage XS. FEATURES Hardened steel construction INCLUDES 5x10x19mm Cup Joint with 2.7mm Socket Head Cap Screw

95,-

KJØP
Hovedbilde HPI 106437 Cup Joint 5x10x15mm
HPI 106437 Cup Joint 5x10x15mm
This is the 5x10x15mm Cup Joint for the HPI Savage XS Flux Vehicle. FEATURES Steel construction INCLUDES 5x10x15mm Cup Joint

89,-

KJØP
Hovedbilde HPI 106717 Racing Gear Differentail Bevel Gear Set ...
HPI 106717 Racing Gear Differentail Bevel Gear Set ...
This is the 10T/16T Gear Diff Bevel Gear Set for the HPI Savage XS.     FEATURES Steel construction  Replaces worn diff gears and restores proper differential operation   INCLUDES 10T/16T Gear Diff Bevel Gear Set with Spacers and Pins

159,-

KJØP
Hovedbilde HPI 101228 Racing Axle 5x40mm (2)
HPI 101228 Racing Axle 5x40mm (2)
This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles  

139,-

KJØP
Hovedbilde Traxxas 3958 Spur Gear 0.8P 58T
Traxxas 3958 Spur Gear 0.8P 58T
This is the 58 Tooth Spur Gear.       FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 58T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP
Hovedbilde HPI 101235 Racing Drive Shaft 6x83mm
HPI 101235 Racing Drive Shaft 6x83mm
This is the Drive Shaft 6x83mm For the HPI Racing Bullet Series. FEATURES: Steel construction INCLUDES: Two driveshafts COMMENTS: The HPI Racing Bullet Series includes Bullet ST Flux 2.4GHz RTR Bullet MT Flux 2.4GHz RTR Bullet ST 3.0 Nitro 2.4GHz RTR Bullet MT 3.0 Nitro 2.4GHz RTR       (11)

159,-

179,-

KJØP
-11%
Hovedbilde Traxxas 3959 Spur Gear 0.8P 62T
Traxxas 3959 Spur Gear 0.8P 62T
This is the optional .8 Metric Pitch 62 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 62T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2" (51mm)           Thickness: .23" (6mm)

39,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png