Hopp til innhold
Hjem / Radio/Servo/Motor / Servo / Servoer / Hitec Servoer / Hitec 36089 D89MW SERVO

Hitec 36089 D89MW SERVO

Art.nr: 36089

895,-

Hitec

Hitec
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

D89MW SERVO

Performance Specifications
Operating Voltage Range (Volts DC) 4.8V ~ 7.4V
Speed (Second @ 60°) 0.17 ~ 0.11
Maximum Torque Range oz. / in. 74 ~ 118
Maximum Torque Range kg. / cm. 5.3 ~ 8.5
Current Draw at Idle 30 mA
No Load Operating Current Draw 300 mA
Stall Current Draw 2,900 mA
Dead Band Width N / A

 

Physical Specifications
   
Dimensions (Metric) 29.0 x 13.0 x 30.0
   
Weight (Gram) 25.0
Circuit Type 32bit Programmable Digital
Motor Type Coreless Metal Brush
Gear Material 5 Metal Gears
Bearing Type Dual Ball Bearing
Output Shaft (type / Ømm) 25 Thooth / 6
Case Material Plastic
Dust / Water Resistance N / A
Connector Gauge (AWG) / Strand Count N / A

 

Radio Control Applications
Parkflyer < 50 oz.
Sport Plane 42 – 50 oz.
Sailplane < 2 meters and up
3D Performance N / A
Scale N / A
Electric Helicopter N / A
Gas Helicopter N / A
On Road 1/16th
Monster Truck N / A
Buggies 1/16th
Truggies N / A
Short Course / Truck 1/16th
Crawlers N / A
Sail Boat N / A
Power Boat 1/16th

Produsent

Hitec

Hitec

Relaterte produkter

 

Hovedbilde Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...
Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...
Art.nr: 35565S
Copied
This is the Hitec HS-5565MH High Voltage, High Speed Digital Servo.     FEATURES Ideal for 1/10 scale touring cars, buggies and short course vehicles,  helicopters up to .90 size, and sport to high performance aircraft  up to 25 percent  Heavy duty metal gears and dual ball bearings  Coreless motor   INCLUDES HS-5565MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round  Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single  Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and  Instructions   SPECIFICATIONS  Operating Voltage: 6.0 - 7.4V DC  6.0V 7.4V  Speed: 0.11 sec/60° 0.09 sec/60°  Torque: 153 oz-in (11 kg-cm) 194 oz-in (14 kg-cm)  Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 37.8mm)  Weight: 2.10oz (60g)  Wire Length: 11.8" (30mm)  Wire Gauge: 25AWG  Operating Temperature Range: -4 to 140°F  Idle Current: 4mA  Stall Current: 2100mA @ 6.0V, 2700mA @ 7.2V  Potentionmeter Type: 4 slider 1M cycle   COMMENTS A note on coreless motors-a conventional servo motor has a steel core  armature wrapped with wire that spins inside the magnets. In a  Coreless design, the armature uses a wire mesh that forms a cup  that spins around the outside of the magnet. This arrangement is  much lighter resulting in smoother operation and faster response  time.

995,-

1.095,-

KJØP
-9%
Hovedbilde Hitec 41920 Standard Heli Gyro Pack HG-5000/HSG-5083MG ...
Hitec 41920 Standard Heli Gyro Pack HG-5000/HSG-5083MG ...
Art.nr: 41920
Copied
This is the Hitec HG-5000 Micro Heading Lock Gyro  and HSG-5083MG Micro Digital Tail Rotor Servo.   FEATURES Gyro Features;  Optimized high response narrow band Hitec signal  Universal signal selectable, functions with both analog and digital  servos  Auto detection for any transmitter and receiver  Precision control technology for heading lock  Remote gain adjustment  Self diagnosis function  Low power consumption (20mA)  Extreme tolerance against disturbance and vibration  Easy data setting and simple LED display  Micro Digital Servo  Optimized for 400-600 class EP helicopters  All metal gear applied (1st MP gear)  Non-programmable INCLUDES Hitec HG-5000 Micro Heading Lock Gyro and HSG-5083MG Micro Digital  Servo, instructions REQUIREMENTS Assembly and adjustment onto the helicopter  SPECIFICATIONS Gyro;  Size: 0.86 x 0.86 x 0.43" (22 x 22 x 11mm)  Weight: 0.35oz (9.9g)  Power Consumption: 20mA Micro Digital Servo;  Size: 1.14 x 0.51 x 1.18" (29 x 13 x 30mm)  Weight: 0.74oz (21g)  Torque: 20.85 oz.in @ 4.8V  Speed: 0.07 sec/60° @ 4.8V

695,-

895,-

KJØP
-22%
Hovedbilde Hitec 37245 HS-7245MH Digital Hi-Voltage/Torque MG ...
Hitec 37245 HS-7245MH Digital Hi-Voltage/Torque MG ...
Art.nr: 37245
Copied
This is the Hitec HS-7245MH Coreless Motor High Torque Digital Mini Servo.     FEATURES Ideal for elecric powered 500 class helis 1/12-1/18 scale cars,  gliders, electric powered airplanes, electric and glow powered  boats  Coreless motor optimized for 7.4V operation  Heavy-duty metal gear train with dual ball bearings  Water and dust resistant  G2 high resolution digital amplifier with MOSFET drive   INCLUDES Hitec HS-7245MH Servo  1.3" (34mm) Double Arm Horn  1.2" (30mm) Single Arm Horn  0.94" (24mm) Round Horn  1.2" (31mm) Four Point Horn  0.87" (22mm) Aluminum Single Arm Horn  Mounting Hardware   SPECIFICATIONS 6.0V 7.4V  Speed: 0.13 sec at 60° 0.11 sec at 60°  Torque: 72.21oz-in (5.2kg-cm) 88.88oz-in (6.4kg-cm)  Weight: 1.2oz (34g)  Size: 1.28 x 0.66 x 1.29" (32.4 x 16.8 x 32.8mm)   COMMENTS A note on coreless motors-a conventional servo motor has a steel core  armature wrapped with wire that spins inside the magnets. In a  Coreless design, the armature uses a wire mesh that forms a cup  that spins around the outside of the magnet. This arrangement is  much lighter resulting in smoother operation and faster response  time.

1.049,-

1.149,-

KJØP
-9%

Kunder kjøpte også

Hovedbilde Hitec HSB-9475SH BL Digital Multipurpose HV w/PAD
Hitec HSB-9475SH BL Digital Multipurpose HV w/PAD
Pro level hobbyists demand the power and precision found in our triple threat HSB-94XX servos. Each one is designed with our durable steel gears and impressive Neu Castle brushless motors with the HSB-9465SH delivering multipurpose performance. Features Durable Steel Gear Train 25-Tooth Standard Spline Programmable 12-Bit Resolution Digital Circuit Ultra Low Current Consumption Constant Power Output 6.0v to 7.4v Brushless Servos Multi Purpose Motor Type - Neucastle Brushless Motor Bearing Type - Dual Ball Bearing Speed (6.0V/7.4V) - 0.13/ 0.10 sec @ 60 deg. Torque kg./cm. (6.0V/7.4V) - 19.4 / 19.4 Size in Millimetres - 40 x 20 x 37 Weight grams - 62g Gears - Steel (output splin 25T)

1.695,-

1.895,-

KJØP
-11%
Hovedbilde Futaba S9470SV S.Bus2 High-Voltage 1/10 Car Servo
Futaba S9470SV S.Bus2 High-Voltage 1/10 Car Servo
This is the Futaba S9470SV HV SB2 Servo for 10 scale Car Usage. FEATURES Coreless motor Water protected Metal gears with two ball bearings Programmable and compatible with S.Bus and S.Bus2 systems High voltage handles extra speed and power provided by 2S LiPobatteries INCLUDES S9470SV HV SB2 SX Servo, 1.8" (44mm) long 3-Point Horn, two rubber Grommets, four Eyelets, 3x8mm Servo Horn Screw and Instructions SPECIFICATIONS                           6.0V                           7.4V Torque: 153oz-in 11.4kg-cm        191oz-in 13.8kg-cm Speed:           0.11 sec/60°               0.09 sec/60° Dimensions: 1-9/16 x 13/16 x 1-7/16" (40 x 20 x 37mm) Weight: 1.9oz (54g) SBus Programmable Defaults Dead Band Degree: 0.25 Damper Factor: 112 Stretcher Gain: 1 Boost: 8 Neutral Offset Degree: 0 Travel Adjust Percentage: 100% Reverse (Normal/Reverse): Nor Stop Mode (Free/Hold): Free Buzzer (On/Off): Off Smoother (On/Off): Off Boost (On/Off): Off

1.099,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png