Handlekurven er tom

Subtotal: 0,-

3 stk til prisen av 1 stk.

HeliMax Voltage 500 3D Aerobatic Quadcopter

På lager: 5
Fra 4.595,-
67% Rabatt Pris utenom pakke 13.785,-
  • 1


    Skjul detaljer

    3 x HeliMax Voltage 500 3D Aerobatic Quadcopter

    Mer informasjon


    Voltage 500-3D, 500-Class Reversing Rotor 3D Drone


    The Voltage 500 3D arrives pre-assembled and ready for your receiver equipment and battery. Reversible motors and impressive rotor size give this drone intense 3D capabilities. Plus, it’s equipped with stability mode to make breaking into 3D ying easier and safer. Intermediate to expert pilots will quickly discover that this drone perfectly balances stability and durability with exceptional 3D capability. 


    • First 500-class reversing motor drone
    • High visibility, easy orientation canopy
    • Stability mode for safe 3D learning
    • Long flight times are possible with 4S, 4,000 mAh batteries
    • Efficient 8.9” 3D props provide the lift for incredible stunts
    • Hybrid Carbon Fiber, G10, and machined aluminum frame
    • Compatible with a wide range of 3 and 4S LiPo batteries
    • Flight controller compatible with Futaba S.BUS, Standard PWM when used with S.Bus Encoder, JR XBUS, DSM2, DSMX and DSMJ radios
    • 25A reversing brushless speed controls 1400kV brushless motors

    The Voltage 3D has two flight modes.

    • 3D Mode: In 3D Mode has no limits on the tilt angle and the quadcopter will not level itself in this mode.
    • Stability Mode: The Stability Mode will limit the quad to a maximum tilt angle of 45 degrees. When the stick is centered, the flight controller will level the quad. This mode makes the Voltage 3D easy to use by pilots that are just learning 3D. Experienced pilots would assign this mode to a momentary switch so the quad can be leveled quickly if they encounter a problem while practicing a 3D maneuver.


    • 100% assembled 3D drone - Rx-R
    • Pre-programmed and tuned 3-axis gyro and accelerometers
    • (8) 8.9 in (226 mm) 3D props
    • (4) 1400kV motors


    • Size: 500 mm diagonally
    • Width: 380 mm
    • Blade Length: 226 mm
    • Weight: 907 g without battery
    • Requires: 5-channel radio and receiver, 3-4S 2200-4000mAh LiPo battery with T-Plug and a charger


  • 2


    Skjul detaljer
⚠ Du har ikke valgt alternativer for alle produktene.

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Trykk Enter for å søke eller Esc for å lukke