SamiRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Futaba Receiver R7003SB 3CH HV S.BUS2 FASSTest

Art.nr: FPR7003SB
1.195,- 1.345,- -11%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

På lager: 1

The R7003SB receiver features bi-directional communication with a FASSTest Futaba transmitter using the S.BUS2 port. Using the S.BUS2 port an impressive array of telemetry sensors may be utilized. R7003SB has a function that gets information from the model during flight by connecting optional telemetry sensors. It also includes both standard PWM output ports and S.BUS output ports. 4 ports of R7003SB can choose an output channel from the 11 modes.
 

  • FASSTest-2.4GHz Bidirectional Communication System
  • S.BUS2 / S.BUS Port and Conventional System Receiver


If R7003SB does not use S.BUS/S.BUS2 system, it can perform only operation of 3 channels. However, if S.BUS/S.BUS2 system is used, use of the maximum channel of a transmitter can be performed. You have to use S.BUS/S.BUS2 servo, in order to use S.BUS/S.BUS2 system.


R7003SB Specifications:

  • FASSTest-2.4GHz System (7ch/8ch/10ch/Multi-ch)
  • S.BUS/S.BUS2
  • 3-channels for conventional system (not using the USB channels)
  • Dual Antenna Diversity
  • Size: 22.5 x 37.4 x 9.3 mm
  • WeighT: 7.2 g
  • Power Requirement: 3.7-7.4V
  • Voltage Range: 3.5-8.4V
  • Battery F/S Voltage: It sets up in the transmitter
  • Extra voltage port (port2): Optional External Voltage Telemetry cable and CA-RWIN-700 unit can be used FPEBB0141 (0-70VDC)


Note, it seems like the Mikado V-bar Gyro doesnt not work together with R7003SB.

 

Spec.

Frequency: 2,4GHz
Signal system: FASST , FASSTest
Length: 37,4 mm
Height: 9,4 mm
Weight: 7,2 g
Width: 22,4 mm
Input Voltage: 3,7-7,4 V
Channels: 3
Special Functions: Dual Antenna , S.Bus , S.Bus2

Trykk ENTER for å søke