Handlekurv

..er tom!

Vi har også en fysisk butikk som vi har alt på lager av det vi har i nettbutikken.

Hurtigsøk
Avansert søk
Produsenter
Annet

Pakke tilbud! E-revo 1/10 Brushless med batteri og lader

Art.nr:
10.878,- 9.791,-
Pakken inneholder

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

  • Pakkens produkter

    Traxxas 56086-4 1/10 E-Revo Brushless 4WD TSM Truck


    Til toppen + Vis produktbeskrivelsen

    Denne utgaven av E-Revo leveres uten batterier og lader, så for å kjøre trenger man 2 stk drivbatterier, lader til disse og 4 AA batterier til radioen. Bilen kan brukes med LiPo og NiMh. Vi anbefaler 2 stk 2S LiPo som er helt rått og kjøre med! Bilen takler også 2stk 3S LiPo men da har man rett og slett for mye power, kun for spesielt interesserte!

     

    The World's Most Powerful, Ready-To-Race®
    Brushless Electric Monster Truck!

    Now with Traxxas Stability Management!

    Traxxas Stability Management™ (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your E-Revo making it much easier to control on common slippery surfaces such as dusty asphalt, smooth concrete, and even ice and snow. Punch it off the line and TSM goes to work sensing the vehicle’s direction and making steering corrections to provide straight-ahead full-throttle acceleration without fishtailing, spinouts, and loss of control. TSM also works during cornering, first making intuitive corrections to maintain your line, and then allowing you to hammer the throttle earlier in the turn for much faster exit speeds. Braking is dramatically improved as TSM works to keep you arrow straight until you come to a complete stop.

    • NEW Traxxas Stability Management
    • 30+mph with 2-7cell MiMH packs, 65+mph on 6S LiPo! (batteries sold separately)
    • Traxxas TQi 2.4GHz Radio System
    • Waterproof MXL-6s Brushless Power System
    • Up to 25.2 Volts of Massive Brushless Power
    • State-of-the-Art Integrated Chassis Design
    • Heavy-Duty 17mm Splined Aluminum Hex Hubs and Wheel Nuts
    • Hard-Anodized PTFE-Coated Aluminum GTR Shocks
    • Top Speed: 65+mph with optional Power Cell 3S LiPo batteries!
    ­

    Built For Brushless
    We built the E-Revo for brushless power right from the start. For other companies, brushless-ready means just making some nominal provisions for battery and motor installation and letting the aftermarket develop the upgrades necessary to make it survive. Not Traxxas. We heard the call for more power, so E-Revo was tested tough for durability with brutal 6S LiPo power and intense custom-wound brushless motors. For the uninitiated, this extreme 65+mph motor monster truck is ordinarily a predictable recipe for a box full of twisted and mangled parts. Not so with the E-Revo Brushless Edition. E-Revo's driveline has been engineered to endure the kind of horsepower and punishment that's possible with today's motor and battery technology. It looks factory because it is factory, complete with a separate motor plate for clean, low-slung single motor installation.

     

    Waterproof MXL-6s Brushless Power System
    Built specifically to handle the rigors of large, power-hungry trucks, the waterproof MXL-6s speed control is ready for 6S LiPo power with its massive 6.5mm gold-plated connectors, high-efficiency heatsink, integrated cooling fan and heavy-duty components. The speed control sends its power pulses to a 2200kV, 75mm motor, designed specifically for maximum performance and reliability with 6S LiPo power in torque-hungry applications. The aluminum motor can is machined to act as a massive heatsink, high-grade bearings deliver maximum efficiency, and high-strength Neodymium magnets give E-Revo Brushless Edition outrageous torque. To resist the twist, a beefy 5mm shaft transfers power to Brushless-Ready transmission.

    Sealed Electronics Extend Your Driving Fun
    Only Traxxas lets you experience driving excitement year-round, no matter what Mother Nature has to offer. Water, mud, and snow don't slow down the E-Revo; its electronic speed control, receiver box, and high-torque digital steering servos are all waterproof for worry-free fun in wet conditions that send other trucks back to the workbench. Drive the E-Revo where you want, when you want—the only limit is your imagination.


    Larger pinion gear/smaller spur gear combinations are for high-speed running on hard, smooth surfaces only.

     

     

    The World's Most Advanced Ready-To-Race® Radio System

     

    E-Revo Brushless is equipped with the world's most advanced Ready-To-Race® radio system. The all-new Traxxas® TQi™ arrives with a full complement of tuning features and offers the unbeatable convenience of "no channels, no crystals" 2.4GHz technology—but that's just the beginning. Automatic model recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models. Just switch on and drive, no naming or "model memory" settings required. Power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The new TQi 2.4GHz transmitter is fully adjustable: steering and throttle end points can be set precisely, and the Multi-Function knob can be programmed to control Steering Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual Rate), Braking Percentage (Dual Rate), or Throttle Trim. TQi's ergonomic case design provides all-day driving comfort, and the unique internal antenna contributes to its sleek, modern look. 

     

    Traxxas Link Wireless Module Compatible

    The TQi's most important new feature may already be in your pocket. The TQi can be equipped with an Traxxas Link Wireless Module (#6511, sold separately) that turns your Android, iPad® iPhone® or iPod touch® (sold separately) into a powerful tuning tool for your Traxxas model. The full-color display combines with the free Traxxas Link™ App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks the mysteries of optimizing your radio system for ultimate vehicle control. Traxxas Link also opens the door to telemetry capability when you add optional sensors to your model.

     

     


    Sealed Watertight Receiver Box
    E-Revo's receiver is fully enclosed for protection from the elements. The antenna and servo wires route neatly through a special watertight seal, and a custom blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box. Patent pending.

     

    Low-CG Chassis Design
    Engineered by Traxxas, the ground-breaking molded E-Revo chassis sets a new benchmark for electric monster truck looks and performance. The E-Revo chassis combines art and function to deliver a lightweight, integrated, and rigid platform that maximizes strength and reduces weight. Scalable battery compartments accept a variety of NiMH and LiPo configurations to unlock E-Revo Brushless edition's power potential. By combining the battery compartments with the chassis design, the battery packs can sit low and close to the center of the truck, plus valuable chassis surface is freed up to accommodate the electronics for a clean layout. This keeps the center of gravity (CG) as low as possible and increases side-to-side agility by keeping most of the weight close to the center.

     

     

    Battery Compartment Vents
    Resembling the exhaust ducts of a turbine powered jet, the futuristic battery vents are securely mounted on the chassis. In addition to offering entrance and exit cooling, the oversized openings incorporate latches that insert into the battery door clasps. The battery compartment vents symbolize the sleek and high-tech image that places E-Revo in a class of its own.

     

    Quick Release Battery Doors

    The futuristic chassis design incorporates enclosed battery compartments into the sides of the chassis for an ultra-clean look even with the battery packs installed. Innovative quick release battery doors mount directly to the chassis, so there are no clips or hold downs to lose during battery swaps. The doors pivot down using a hinged design and dual clasps secure the tops of the battery doors for impact-proof security. To open the battery doors depress the latches and pull on the battery door tabs. To close the doors simply press on the door until the latches snap into place.

    ­

    Adjustable Battery Compartments
    Keyed, adjustable L-braces located inside the battery compartments allow the battery packs to be positioned in multiple incremental positions from front to rear for precise weight bias tuning. A top mounted, spring loaded clip holds battery packs securely at the lowest point to keep the CG as low as possible.

    ­

    Dual-Servo Steering System
    E-Revo takes a total system approach to eliminating the slow, mushy steering response typical on other monster trucks. Each servo is rated for 125 oz.-in. of torque, giving E-Revo a total of 250 oz.-in. of tire-turning twist to keep you in command no matter how tough the conditions.

     

    Leading The Way
    There is no other electric monster truck like E-Revo. It embodies the highest level of creativity in design and engineering skill to create the absolute best in monster truck performance. E-Revo is the benchmark that could only come from Traxxas, the leaders in innovation and design.

    MODEL 56086-4: Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system, Traxxas Stability Management, MXL-6s Brushless Power System, and ProGraphix® painted body.

     


    *Batteries and charger sold separately

     

    (-4)

    Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector


    Til toppen + Vis produktbeskrivelsen

    This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.

     

     


    FEATURES

    Semi rigid construction does not require a hard case and eliminates
     wire harness connectors that can loosen and fail
     Engineered specifically to fit Traxxas models
     New high current connector with gold-plated copper terminals and
     integrated balance connector
     iD Auto Battery Identification allows Traxxas iD equipped chargers to
     automatically set and optimize charge settings for specific battery
     MAXX cable high-efficiency 12 gauge silicone jacketed wire

     


    INCLUDES

    Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High
     Current Connector and Integrated Balance Plug

     


    REQUIREMENTS

    LiPo compatible charger such as the Traxxas EZ-Peak Plus,
     LiPo charging bag

     


    SPECIFICATIONS

     Configuration: 3S1P
     Continuous Discharge: 25C (125A)
     Max Burst Rate: 50C (250A)
     Watt Hours: 55.5
     Charge Rate: 1C (5A)
     Max Charge Rate: 2C (10A)
     Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
     Weight: 13.3oz (376g)

     


    COMMENTS

    ALWAYS use a LiPo-approved Charger
     ALWAYS use a LiPo Cell Balancer
     NEVER Charge over 4.20V per cell
     NEVER Charge at currents greater than 1C
     NEVER Trickle Charge
     NEVER allow to Discharge below 2.5V per cell
     NEVER disassemble or modify pack wiring in any way or puncture cells
     NEVER place on combustible materials or leave unattended during
     charging
     ALWAYS Charge in a fireproof location
     ALWAYS set charger's output volts to match battery volts
     ALWAYS keep out of reach of children

    Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector


    Til toppen + Vis produktbeskrivelsen

    This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.

     

     


    FEATURES

    Semi rigid construction does not require a hard case and eliminates
     wire harness connectors that can loosen and fail
     Engineered specifically to fit Traxxas models
     New high current connector with gold-plated copper terminals and
     integrated balance connector
     iD Auto Battery Identification allows Traxxas iD equipped chargers to
     automatically set and optimize charge settings for specific battery
     MAXX cable high-efficiency 12 gauge silicone jacketed wire

     


    INCLUDES

    Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High
     Current Connector and Integrated Balance Plug

     


    REQUIREMENTS

    LiPo compatible charger such as the Traxxas EZ-Peak Plus,
     LiPo charging bag

     


    SPECIFICATIONS

     Configuration: 3S1P
     Continuous Discharge: 25C (125A)
     Max Burst Rate: 50C (250A)
     Watt Hours: 55.5
     Charge Rate: 1C (5A)
     Max Charge Rate: 2C (10A)
     Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
     Weight: 13.3oz (376g)

     


    COMMENTS

    ALWAYS use a LiPo-approved Charger
     ALWAYS use a LiPo Cell Balancer
     NEVER Charge over 4.20V per cell
     NEVER Charge at currents greater than 1C
     NEVER Trickle Charge
     NEVER allow to Discharge below 2.5V per cell
     NEVER disassemble or modify pack wiring in any way or puncture cells
     NEVER place on combustible materials or leave unattended during
     charging
     ALWAYS Charge in a fireproof location
     ALWAYS set charger's output volts to match battery volts
     ALWAYS keep out of reach of children

    Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger w/iD


    Til toppen + Vis produktbeskrivelsen

    This is the AC Powered Traxxas EZ-Peak 100W Dual Battery Charger
     with iD Auto Battery Identification.

     

     


    FEATURES

    Charges 2S and 3S LiPo batteries
     5-8 cell NiMH batteries
     Traxxas's iD technology automatically configures and optimizes charge
     settings for Traxxas iD equipped batteries
     Charges two batteries simultaneously at up to 50W (4 amps) each, or
     charges single battery at 100W (8 amp) output in High-Output
     mode
     Charges a NiMH and LiPo at the same time
     Advanced Mode for full manual control of charger settings
     Progress bar and audible alerts
     Storage Mode prepares LiPo batteries for extended storage

     


    INCLUDES

    Traxxas EZ-Peak 100W Dual Battery Charger with AC Power Cord,
     Instructions, Cooling Fan

     


    SPECIFICATIONS

     Input Power: 100-240V/50-60Hz
     Output: 100W max
     Charge Current: 1-4A (dual mode), 5-8A (high output mode)
     Discharge Current Range: 500mA
     Current Drain for Balance Ports: 500mA
     Weight: 20.3oz (575g)
     Dimensions: 7 x 5.4 x 2.2" (176 x 138 x 57mm)