Hopp til innhold
Hjem / Batteri & lader / Kabler/Ledninger / Shrink Tube / DynoMAX B9206 Heat Shrink Tube Red & Black D7/W11mm x 1m

DynoMAX B9206 Heat Shrink Tube Red & Black D7/W11mm x 1m

Art.nr: B9206

29,-

DynoMAX

DynoMAX
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Red & Black Shrink Tube Set - D7mm/W11mm 1+1m

Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing.

Specifications:

  • Diameter: 7mm
  • Width (laid flat): 11mm
  • Length: 1+1m
  • Color: Red & Black
  • Material Thickness: 0.25 - 0.35mm
  • Material: Polyolefin (PE)
  • Shrink Rate: 2:1
  • Radial Shrinkage: 50%
  • Longitude Shrinkage: 5%
  • Shrink Temperature: 70-110°C
  • Operating Temperature: -55°C - 125°C
  • All measurements are before heat shrinking

Produsent

DynoMAX

DynoMAX

Leverer batteriplugger til rc.

Relaterte produkter

 

Hovedbilde DynoMAX B9205 Heat Shrink Tube Red & Black D6/W8mm x ... Hovedbilde DynoMAX B9205 Heat Shrink Tube Red & Black D6/W8mm x ...
DynoMAX B9205 Heat Shrink Tube Red & Black D6/W8mm x ...
Art.nr: B9205
Copied
Red & Black Shrink Tube Set - D6mm/W8mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 6mm Width (laid flat): 8mm Length: 1+1m Color: Red & Black Material Thickness: 0.25 - 0.35mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

29,-

KJØP
Hovedbilde DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ... Hovedbilde DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...
DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...
Art.nr: B9204
Copied
Red & Black Shrink Tube Set - D5mm/W7.5mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing.   Specifications: Diameter: 5mm Width (laid flat): 7.5mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

29,-

KJØP
Hovedbilde DynoMAX B9203 Heat Shrink Tube Red & Black D4/W6mm x ... Hovedbilde DynoMAX B9203 Heat Shrink Tube Red & Black D4/W6mm x ...
DynoMAX B9203 Heat Shrink Tube Red & Black D4/W6mm x ...
Art.nr: B9203
Copied
Red & Black Shrink Tube Set - D4mm/W6mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 4mm Width (laid flat): 6mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

19,-

KJØP
Hovedbilde DynoMAX B9202 Heat Shrink Tube Red & Black D3/W4.5mm x ... Hovedbilde DynoMAX B9202 Heat Shrink Tube Red & Black D3/W4.5mm x ...
DynoMAX B9202 Heat Shrink Tube Red & Black D3/W4.5mm x ...
Art.nr: B9202
Copied
Red & Black Shrink Tube Set - D3mm/W4.5mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 3mm Width (laid flat): 4.5mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

19,-

KJØP

Kunder kjøpte også

Hovedbilde Tamiya 84292 TRF Shaft Guide (Grooved *4)
Tamiya 84292 TRF Shaft Guide (Grooved *4)
Tamiya 84292 TRF Shaft Guide (Grooved *4)

49,-

KJØP
Hovedbilde Yeah Racing YT-0190 Aluminum Alloy Car Stand for On ... Hovedbilde Yeah Racing YT-0190 Aluminum Alloy Car Stand for On ...
Yeah Racing YT-0190 Aluminum Alloy Car Stand for On ...
Yeah Racing Aluminum Alloy Car Stand for On Road Description: Easily make fixes to your car or install upgrades with this car stand! Soft sponge on the top part so your car doesn't slide off.     Features: For: 1/10 1/12 On Road RC Car Material: Aluminum & Alloy Rotatable Plate Color: Black   Includes: Aluminum Car Stand (1 pcs)

199,-

KJØP
Hovedbilde Hitec 56411 TAMIYA SERVO SAVER (OLD TYPE(WHITE), NEW ...
Hitec 56411 TAMIYA SERVO SAVER (OLD TYPE(WHITE), NEW ...
Tamiya Servo Saver som passer HiTec 24 splines

18,-

KJØP
Hovedbilde DynoMAX B9207 Heat Shrink Tube Red & Black D8mm x 1m
DynoMAX B9207 Heat Shrink Tube Red & Black D8mm x 1m
Red & Black Shrink Tube Set - D8mm/W12mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 8mm Width (laid flat): 12mm Length: 1+1m Color: Red & Black Material Thickness: 0.25 - 0.35mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

35,-

KJØP
Hovedbilde DynoMAX B9330 Connector MT60 3-Pole 3.5mm Pair Hovedbilde DynoMAX B9330 Connector MT60 3-Pole 3.5mm Pair
DynoMAX B9330 Connector MT60 3-Pole 3.5mm Pair
The MT60 connector contains three 3.5 mm dia bullet connectors in a yellow triangular plastic housing with practical solder-joint covers. A perfect connector system between your brushless motor and ESC.   Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Solder Joint Protection Covers   Size (together): L: 27 (47) x 12 x 12 mm Weight: 9.3 g (pair) Bullet Connector Diameter: 3.5 mm (x3) Stripped Wire Max dia: 3.0 mm   Package includes: 1 pair of MT60 connectors & solder covers

65,-

KJØP
Hovedbilde DynoMAX B9201 Heat Shrink Tube Red & Black D2/W3mm x ... Hovedbilde DynoMAX B9201 Heat Shrink Tube Red & Black D2/W3mm x ...
DynoMAX B9201 Heat Shrink Tube Red & Black D2/W3mm x ...
Red & Black Shrink Tube Set - D2mm/W3mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 2mm Width (laid flat): 3mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

39,-

KJØP
Hovedbilde DynoMAX B9202 Heat Shrink Tube Red & Black D3/W4.5mm x ... Hovedbilde DynoMAX B9202 Heat Shrink Tube Red & Black D3/W4.5mm x ...
DynoMAX B9202 Heat Shrink Tube Red & Black D3/W4.5mm x ...
Red & Black Shrink Tube Set - D3mm/W4.5mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 3mm Width (laid flat): 4.5mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

19,-

KJØP
Hovedbilde DynoMAX B9203 Heat Shrink Tube Red & Black D4/W6mm x ... Hovedbilde DynoMAX B9203 Heat Shrink Tube Red & Black D4/W6mm x ...
DynoMAX B9203 Heat Shrink Tube Red & Black D4/W6mm x ...
Red & Black Shrink Tube Set - D4mm/W6mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 4mm Width (laid flat): 6mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

19,-

KJØP
Hovedbilde DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ... Hovedbilde DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...
DynoMAX B9204 Heat Shrink Tube Red & Black D5/W7.5mm x ...
Red & Black Shrink Tube Set - D5mm/W7.5mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing.   Specifications: Diameter: 5mm Width (laid flat): 7.5mm Length: 1+1 m Color: Red & Black Material Thickness: 0.25 - 0.35 mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

29,-

KJØP
Hovedbilde DynoMAX B9205 Heat Shrink Tube Red & Black D6/W8mm x ... Hovedbilde DynoMAX B9205 Heat Shrink Tube Red & Black D6/W8mm x ...
DynoMAX B9205 Heat Shrink Tube Red & Black D6/W8mm x ...
Red & Black Shrink Tube Set - D6mm/W8mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 6mm Width (laid flat): 8mm Length: 1+1m Color: Red & Black Material Thickness: 0.25 - 0.35mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

29,-

KJØP
Hovedbilde DynoMAX B9208 Heat Shrink Tube Red & Black D9/W14mm x ... Hovedbilde DynoMAX B9208 Heat Shrink Tube Red & Black D9/W14mm x ...
DynoMAX B9208 Heat Shrink Tube Red & Black D9/W14mm x ...
Red & Black Shrink Tube Set - D9mm/W14mm 1+1m Set with 1m red and 1m black polyolefin 2:1 heat shrink tubing suitable for most R/C and hobby electrical wires and connectors but also other applications where you need shrink tubing. Specifications: Diameter: 9mm Width (laid flat): 14mm Length: 1+1m Color: Red & Black Material Thickness: 0.25 - 0.35mm Material: Polyolefin (PE) Shrink Rate: 2:1 Radial Shrinkage: 50% Longitude Shrinkage: 5% Shrink Temperature: 70-110°C Operating Temperature: -55°C - 125°C All measurements are before heat shrinking

39,-

KJØP
Hovedbilde Futaba Receiver R202GF 2CH S-FHSS
Futaba Receiver R202GF 2CH S-FHSS
FHSS / S-FHSS 2.4GHz system 2-channels Power Requirements: 4.8-7.4V Size: 23 x 35 x 9 mm Weight: 6 g Spec. Frequency: 2,4GHz Signal system: FHSS Channels: 2

349,-

429,-

KJØP
-19%
Hovedbilde Savox SV-0258MG Servo 8Kg 0,11s HV Metal Gear Low ... Hovedbilde Savox SV-0258MG Servo 8Kg 0,11s HV Metal Gear Low ...
Savox SV-0258MG Servo 8Kg 0,11s HV Metal Gear Low ...
SAVÖX SAV-SV0258MG - SV-0258MG Low Profile Servo 8Kg 0.11s HV Hybrid Gears Protection and Precision for Entry-Level RC The SV-0258MG is engineered to work seamlessly with entry-level ESCs in RTR kits, limiting current draw to just 1.5A to prevent shutdowns and ensure uninterrupted driving. Its low-profile composite case saves space, while hybrid gears and digital electronics provide consistent, precise steering control. It's ideal for RTR and 1/10 touring cars where both protection and performance matter. Hybrid Metal/Composite Gears Provides a balance of durability and weight savings for everyday and beginner use. Low-Profile Compact Size Measures only 40.8×20.2×27.75mm, making it a perfect fit for 1/10 touring cars and other compact builds. Digital Precision Control Equipped with a 10-bit digital PCB and VR potentiometer for smooth, accurate steering response. Specs: Line: BLACK EDITION Application: CAR Servo Size: Low Profile Operating Voltage: 6V-7.4V Speed @6.0V: 0.13s/60° Torque @6.0V: 6.5kg/cm Speed @7.4V: 0.11s/60° Torque @7.4V: 8.0kg/cm Amplifier Type: Digital Controller Motor Type: DC Case Type: Composite Protection: Dust Resistant Dimensions: L40.8xW20.2xH27.7 mm Weight: 36g Gear Type: Hybrid (Metal/Composite) Compatibility: Sanwa SSR PCB Board: 10-bit Horn Gear Spline: 25T (Φ6) Rotating Direction: Clockwise (when 1000→2000μsec) Max Travel: ~140° (when 800→2200μsec) Operating Travel: 90° (when 1000→2000μsec) Neutral Position: 1500μsec Bearing: 2x Ball Bearings Potentiometer: VR Cable Diameter: 26AWG Cable Length: 250±5mm Connector: JR Stall Current @6.0V: 1500mA Operating Current @6.0V: 150mA Stall Current @7.4V: 1800mA Operating Current @7.4V: 180mA Idle Current: 6mA Dead Band Width: 3-5μsec Frequency Range: 50-360Hz Control System: Pulse Width Modification Operating Temperature: -10°C to 50°C

379,-

399,-

KJØP
-5%
Hovedbilde Traxxas 3944X Pinion Gear 14T-32P Hardened Steel
Traxxas 3944X Pinion Gear 14T-32P Hardened Steel
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw   For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

99,-

KJØP
-10%
Hovedbilde Hobbywing 38030207 QuicRun Combo 10BL120 - 3652SL ...
Hobbywing 38030207 QuicRun Combo 10BL120 - 3652SL ...
QuicRun Brushless WP 10BL120 G2 ESC & 3652SL G2 3250KV Motor Combo Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Explosive Output Power The output of the motor is powerful and explosive. Taking 3652-3250KV as an example and comparing it with the same specification; there is more than 10% increase in maximum output power! Excellent performance, temperature is lowered The motor efficiency is significantly higher when comparing it with the same specification. Taking 3652-3250KV as an example, the efficiency of the rear section is 8% higher & motor temperature is lower under the same load conditions. Explosion-improved rotor design - strong and reliable The rotor is designed with front and rear aluminum end plates, which greatly improves the overall balance. At the same time, the rotor is wound with high-strength tensile materials and has strong explosion-proof ability. Detachable design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for routine cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/10, Brushless, Sensorless Poles: 4 KV Rating: 3250 LiPo: 2-3S No Load Current: 4A OD: 36mm Length: 52mm Shaft Diameter: 3.175mm Shaft Length: 15mm Connectors: 4mm male Weight: 223g Front Bearing: OD13xID5xT4mm Rear Bearing: OD13xID5xT4mm Applications: 1/10 On-road, 2WD Buggy & 2WD Truck (light loads) ESC Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port

1.195,-

1.395,-

KJØP
-14%
Hovedbilde Fuse Overgang - Male Traxxas til Female XT60
Fuse Overgang - Male Traxxas til Female XT60
Fuse Overgang - Male Traxxas til Female XT60

95,-

KJØP
Hovedbilde Mstyle E60WP Waterproof Electronic Speed Control (ESC) Hovedbilde Mstyle E60WP Waterproof Electronic Speed Control (ESC)
Mstyle E60WP Waterproof Electronic Speed Control (ESC)
Mstyle E60WP Waterproof Brushed Electronic Speed Control (ESC) Item no. 542408 The E-60WP is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether you've got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The E-60WP is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! If you've got plenty of power to strap into your RC, you can count on the E-60WP to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.   Fit the E-60WP in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features: 2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification: Forward Continuous Current: 60A Forward Burst Current: 360A Reverse Continuous Current: 230A Reverse Burst Current: 180A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency: 1 KHz BEC: 6V/3A Dimensions: 36.5x32x18mm Weight: 39g

399,-

449,-

KJØP
-11%
Hovedbilde Yeah Racing YB6014M/S10 RC Ball Bearing (5x11x4mm) ... Hovedbilde Yeah Racing YB6014M/S10 RC Ball Bearing (5x11x4mm) ...
Yeah Racing YB6014M/S10 RC Ball Bearing (5x11x4mm) ...
Yeah Racing RC Ball Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014MS/10) RC Ball Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Hovedbilde Hitec 57434 MOTOR CONNECTOR ONE PAIR
Hitec 57434 MOTOR CONNECTOR ONE PAIR
MOTOR CONNECTOR ONE PAIR

25,-

KJØP
Hovedbilde Traxxas 3952X Pinion Gear 32P 22T
Traxxas 3952X Pinion Gear 32P 22T
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

79,-

89,-

KJØP
-11%
Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter
Flysky FS-GT3B 2.4GHZ Transmitter
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Hovedbilde BSD 933-006 Centre Diff. Box
BSD 933-006 Centre Diff. Box
Centre Diff. Box

139,-

KJØP
Hovedbilde Tamiya 51400 Rubber Rear Tire F104 (2)
Tamiya 51400 Rubber Rear Tire F104 (2)
These are optional Rubber Rear Tires for the Tamiya F104 Ferrari Kit.     FEATURES Slick design  Foam inserts   INCLUDES Two Rubber Rear Tires for the Tamiya F104  Two foam inserts   REQUIREMENTS Installation on Wheels  Tire Glue   SPECIFICATIONS  Outer Diameter: 64.5mm (2.54")  Inner Diameter: 45mm (1.77")  Width: 33.5mm (1.32")   COMMENTS If using with the F104 Pro chassis, the #51398 Mesh Wheels  must be used

189,-

199,-

KJØP
-5%
Hovedbilde Tamiya 14135042 Universal joint for 58132
Tamiya 14135042 Universal joint for 58132
Universal joint for Tamiya 58132.   May fit other cars as well, please refer to your manual.

95,-

KJØP
Hovedbilde Tamiya 81701 Acrylic Mini XF-1 Flat Black 1/3 oz
Tamiya 81701 Acrylic Mini XF-1 Flat Black 1/3 oz
  This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Flat Black paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

29,-

39,-

KJØP
-26%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png