SAMIRC
Lukk
Handlekurven er tom

Subtotal: 0,-

Castle Creations 010014502 1/8 Mamba Monster X WP ESC/2650kV

Art.nr: 010-0145-02
3.290,- 3.490,- -6%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

På lager: 1

This is the Castle Creations Mamba Monster X Waterproof ESC and
 1512-2650Kv Brushless Motor.

 

 


FEATURES

ESC;
 For 1/8 scale buggies, truggies and on-road vehicles, and 1/10 scale
 monster trucks weighing up to 15lbs (6.8kg)
 2S-6S LiPo compatible
 Adjustable BEC (battery eliminator circuit) 5.5V, 6.0V, 7.5V, or 8.0V
 8A Peak), default 5.5V
 Castle Link Adjustable settings include;
 Brake/Reverse Type
 LiPo Cutoff Voltage
 Brake Amount
 Drag Brake
 Motor Type
 Programmable Auxiliary Wire (AUX) allows adjustments to several
 settings such as torque control and max throttle from a compatible
 transmitter
 Sensored motor capable with purchase of optional (not included)
 Sensor harness from Castle Creations
 Telemetry ready with purchase of Castle Creations S.BUS Telemetry
 Link


Motor;
 Oversize ABEC-1 front and rear bearings
 Sintered neodymium magnets

 


INCLUDES

Castle Creations Mamba Monster X ESC with On/Off Switch, pretinned
 Battery Leads, Receiver Connector, Female Motor Connectors, 30mm
 Cooling Fan, 1512-2650Kv Brushless Motor, Instruction Booklet

 


REQUIREMENTS

Compatible LiPo Battery
 Battery Connectors, Castle Creations 6.5mm are recommended

 


SPECIFICATIONS

ESC;
 Input Voltage Range: Min. 2S LiPo, Max. 6S, 25.2V
 BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
 Brake: Proportional
 Reversible: Yes, with lockout
 On/Off Switch: Yes
 Dimensions: 2.08 x 1.9" (53 x 49mm)
 Weight: 3.91oz (111.1g) with wires
 Motor;
 Dimensions: 1.6 x 2.7" (39.98 x 68mm)
 Weight: 15oz (424g)
 Input Voltage Range: Min. 2S LiPo, Max. 4S
 Max Vehicle Weight: 9lbs (4.1kg)
 Mounting Hole Specifications: 3mm @ 1/2"
 Shaft Diameter: 0.196" (5mm)

 


COMMENTS

Not intended for operation while submerged in liquid. If unit is
 operated in wet conditions, rinse with fresh water to remove
 dirt or corrosives, then fully dry unit. Cooling fan is not
 waterproof and must be removed prior driving in wet conditions.

Trykk Enter for å søke eller Esc for å lukke