SAMIRC
Lukk
Handlekurven er tom

Subtotal: 0,-

Castle Creations 010011505 1/10 SV3 Sidewinder WP ESC 1406-4600k

Art.nr: 010-0115-05
1.490,-1.590,-

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

På lager: 3

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
 and 1406 4600Kv Sensored Brushless Motor.
 **NOT for use in 4WD short course trucks.**

 

 

 


FEATURES

Sidewinder SV3 12V ESC
 Recommended for all 1/10 scale buggy and truggy applications that
 weigh less than 5lbs (2.25kg) ready to run (not for use in heavier
 vehicles such as E-Revos or E-Maxx class vehicles)
 USB programming capability via Castle Link USB adapter (not included)
 Waterproof for use in nearly every environment (not intended for
 operation while submerged in liquid)
 Compatible with the Castle Creations 14xx series NeuCastle motors
 Reversible with reverse lockout


1406 4600Kv Sensored Brushless Motor
 For 2WD short course trucks on 2S LiPos geared conservatively,
 1/10 scale 2WD stadium trucks and buggies on 2S for bashing and
 limited runs on 3S LiPos with conservative gearing, also ideal for
 1/10 scale on road cars running on 2S and 3S LiPo power
 Four pole configuration for maximum efficiency at high RPM

 

 


INCLUDES

Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
 Leads, 4mm Female Bullets for Motor Connection, Receiver Connector
 On/Off Switch, and Instructions
 1406 4600Kv Sensored Brushless Motor with Sensor Wire

 
REQUIREMENTS

Battery connectors


SPECIFICATIONS

ESC;
 Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
 Brake: Proportional
 Reversible: Yes, with lockout
 Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
 Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
 battery connector
 Motor;
 Input Voltage Range: 2-3S LiPo
 Kv: 4600
 Max. RPM: 100,000
 Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR
 Length: 1.9" (49.5mm)
 Diameter: 1.4" (36mm)
 Weight with Wires: 6.9oz (197g)
 Shaft Diameter: 1/8" (3.17mm)
 Shaft Length: 0.59" (15mm)
 Mounting Hole Specifications: M3 @ 25mm
 Connectors: 4mm Male Castle Bullet

Trykk Enter for å søke eller Esc for å lukke