Putting the X in Extreme!
Mamba XL X is a 1:5 scale controller capable of 3S - 8S LiPo,with a 20 amp peak BEC. Paired with our NEWLY REDESIGNED Castle 2028 800kv SENSORED brushless motor (sensorless operation required with this ESC) this is the perfect upgrade for 1:5 scale RC hobby vehicles (including gas to electric conversions) weighing up to 30lbs for 2WD and 25 lbs for 4WD.
|Input Voltage Range:||MIN: 3S LiPo
MAX: 8S LiPo
|BEC Specifications:||Adjustable from 5V to 8.5V (20A peak), default 5.5V|
|Operating Environment:||Not intended for use in wet conditions, ESC is not waterproof|
|Reversible:||Yes, but may be disabled for racing.|
|Cooling Fan:||Yes, factory equipped 40mm.|
|Size:||Length: 4.81" (122.23mm)
Width: 2.06" (52.38mm)
Height: 2.75" (69.85mm)
|Weight (without wires):||10.4 oz. (294.84g)|
|Connectors:||8.0mm female bullets for motor connection.|
|Items Needed for Operation:||A high current connector designed for high-powered electric systems, rated for 100+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads.|
|Product Use Statements:||
|Application Guidelines:||1:5th scale RC hobby vehicles weighing up to 30lbs.|
|Recommended Motors:||Combo includes Neu-Castle 2028 800Kv: Max Cells: 8S LiPo|
|Max. Recommended Vehicle Weight:||30 lbs, with batteries, ready-to-run for 2WD and 25 lbs for 4WD.|
|Programmability:||Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included) and freely downloadable Castle Link Windows software or the Castle Link iOS App and a B-LINK Bluetooth Adapter.|
|Telemetry Link Capable:||Yes|
|Input Voltage Range:||12S max|
|Motor Size:||Length: 4.4" (113.2mm)
Diameter: 2.2" (57mm)
|Shaft Size:||Length: 30mm
|Weight (w/wires):||44 oz.|
|Mounting Hole Specifications:||30mm|
|Cooling Fan:||Yes, included in combo.|
|Connectors:||8.0mm male bullets.|
|Items Needed for Operation:||N/A|
|Product Use Statements:||N/A|
|Max. Recommended Vehicle Weight:||4WD vehicles weighing less than 25lbs.
2WD vehicles weighing less than 30lbs.
|Tech Notes:||Running modes: Sensorless and Sensored
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.