Handlekurven er tom

Subtotal: 0,-

Axial 90068 1/10 Yeti SCORE Trophy Truck Kit AX90068

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

På lager: 1

This is the 1/10 scale Electric Powered, Radio Controlled
 Yeti SCORE Trophy Truck Kit from Axial.




 Chassis: Plastic tub type with bolt-on 4 link mount for rear
 Drive: Four wheel, WB8 HD rear driveshaft, hardened steel universal
 front axle set
 Shocks: Polished aluminum body King shocks, oil filled,
 14x54mm 4.33 lbs/in (Yellow) Firm front springs,
 14x90mm 2.78 lbs/in - (Yellow) Firm rear springs and
 14x90mm 2,25 lbs/in - (Green) Firm rear springs
 Steering: Dual shear rack
 Transmission: Single speed with brushless motor gearing (2nd gear
 fixed), adjustable motor mount, 2-speed optional gear set
 available, but must be ordred separately
 Slipper Clutch: Dual design uses a pad on each side of spur gear for
 added surface area for more precise tuning and holding power
 Front Suspension: Independent design allows better control direction
 of travel ant high speeds when one side is adjusting to road
 Rear Suspension: AR60 rear solid axle, 4 link design, three upper
 link positions to adjust the anti-squat, lower link mounts can be
 flipped to change the roll center
 Pinion Gear: 32 pitch 17T powder steel, made for 5mm motor shafts
 Spur Gears: 32 pitch 56T and 64T composite plastic
 Wheels: Officially licensed Method 105 wheels orange in color,
 compatible with 2.2/3.0 short course tires
 Tires: BF Goodrich Baja T/A KR2 Tires: 3.0" (79mm), inner
 diameter: 2.2" (56mm)
 Battery Tray: Height adjustable with room for most standard size 2S
 and 3S LiPo battery packs, easily accessible by removing two front
 body pins and pivoting up entire body
 Body: Molded clear lexan one-piece, realistic scale accessories
 interior tray with molded driver figures and dashboard, three
 pairs of black styrene helments (Sparco, Moto-X, Skully), exhaust
 outlets on top of rear fender, molded & hood vents and plastic
 light buckets at all 4 corners. Axial LED lights and controller
 may be added to complete the buckets



RTR Yeti SCORE Trophy Truck Kit with Body, Body Accessories, 32P
 56T, and 64T Spur Gears, 32P 17T Pinion Gear, Instruction Manual
 and Decal Sheets



 Motor and ESC: Standard 1/10 scale brushed or brushless 4-pole
 Radio: 2-channel with high torque steering servo
 Battery: 2S or 3S LiPo pack with Dean's connector
 Battery Charger: To match selected LiPo Battery
 Lexan safe spray or brush-on paint
 LiPo Charging Sack, Track and Maintenance Equipment



 Length: 23" (583mm)
 Width: 12" (305mm)
 Height: 8.3" (210mm)
 Wheelbase: 14.2" (360mm)
 Ground Clearance: 1.7" (43mm)
 Weight: 6.65lbs (3kg)
 Length: 22" (559mm)
 Width: 11.4" (289mm)
 Height: 5.7" (144mm)

Kunder kjøpte også

Trykk Enter for å søke eller Esc for å lukke