No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
Needed to Complete
What's in the Box?
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It's mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you've known and expect from Axial.
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just one body clip and swinging the body up.
Just because the SCX24™ is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
|Approximate Assembly Time:||No assembly required|
|Ball Bearings:||Full set|
|Batteries:||Dynamite 7.4V 350mAh 30C LiPo|
|Body:||Axial Jeep JL Hardtop|
|Brakes:||Integral with ESC|
|Charger:||USB LiPo Charger|
|Chassis:||Stamped Steel Chassis Rails|
|Differential:||Worm Gear 16T/4T|
|Ground Clearance:||1.06" (27mm)|
|Motor Type:||Brushed 180 size, 88 turn|
|Radio:||Axial AX-4 2.4GHz 2-Channel|
|Servos:||AS-1 Micro Steering Servo|
|Shock Type:||Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)|
|Speed Control:||AE-6 ESC/RX with Reverse|
|Suspension:||3 Link Front and 4 Link Rear|
|Tire Diameter:||2.0" (51mm)|
|Tire Tread:||Nitto Trail Grappler M/T|
|Track:||Front and Rear, 3.9" (99.5mm) distance from outer edges of tires measured side-to-side|
|Vehicle Type:||Desert Crawler|
|Wheel Diameter:||1.0" (26mm)|
|Wheel Type:||Plastic KMC Machete, black in color|
|Wheel Width:||.48" (12.4mm)|